centerless grinding used for sale

max. wheel diameter: 1010 mm gear width: 0 mm max. module: min. module: total power requirement: 15 kW weight of the machine ca.: 9,5 t dimensions of the machine ca.: m Max. depth of tooth 10 mm Max. workpiece Ø (for clearance) 1,010 mm Max. external Ø of coupling 610 mm Sliding base withdraw 216 mm Max. distance from grinding wheel to workpiece nose 90 - 430 mm Max. weight of workpiece, including clamp 500 kg No. of teeth 32 to 150 Grinding wheel Ø, approx 152 - 320 mm Grinding wheel speeds, infinitely variable 0 - 3,600 rpm Work spindle bore 60 mm Total electrical load, approx. 15 kW - 380 V - 50 Hz Weight, approx. 9,500 kg Accessories / Special Features Automatic roughing and finishing process via pre-settable counter and built-in feed cam. Counter for number of teeth. Counter for number of dressing cycles. 2 built-on dressing units with three dressing diamonds for radiu ...

workpiece diameter: 320 mm threading length: 300 mm thread pitch: mm total power requirement: 90 kW weight of the machine ca.: 12000 kg dimensions of the machine ca.: m Thread and worm grinder for steering worms The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

drill diameter: 3-40 mm drilling length: 500 mm lip angle: 15 - 75 ° total power requirement: 4,1 kW weight of the machine ca.: 1,5 t dimensions of the machine ca.: 1,80x1,60x1,40 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

drill diameter: 32 mm drill diameter: 32 mm drilling length: 0 mm drilling length: 0 mm lip angle: ° lip angle: ° total power requirement: kW total power requirement: kW weight of the machine ca.: t weight of the machine ca.: t dimensions of the machine ca.: m dimensions of the machine ca.: m Universal Drill Bit Grinder lots of accessories The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

drill diameter: 3 - 50 mm drilling length: 500 mm lip angle: 90 - 140 ° voltage: 380 V weight of the machine ca.: 120 kg dimensions of the machine ca.: 0,80 x 0,60 x 1,30 m Serial-No.: 76658 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

workpiece length: 610 mm work piece width: 180 mm workpiece height: 240 mm dia. of cup wheel: 200 mm table-size: Ø 280 mm spindle throat: 250 mm spindle speed:: 3000 U/min. voltage: 380 V total power requirement: 2,94 kW weight of the machine ca.: 430 kg dimensions of the machine ca.: 0,85 x 0,75 x 1,90 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

band width: 300 mm table length: 2070 mm table-size: 750 x 380 mm band speed: 7,5 m/sec engine output: 1,5 kW voltage: 400 V weight of the machine ca.: 85 kg dimensions: 1.030 x 530 x 380 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

band width: 200 mm band length: 1490 mm table-size: 540 x 280 mm engine output: 1,1 kW voltage: 400 V weight of the machine ca.: 72 kg dimensions: 750 x 600 x 320 mm Equipment: - Table model - 1 grinding belt - Steel sanding table with planed surface - Belt alignment via two threaded rods with star grip The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: . mm gear width: . mm max. module: . min. module: Control: total power requirement: 15 kW weight of the machine ca.: t dimensions of the machine ca.: m specifications Max. Grinding length (mm) 500 Max. Grinding diameter (mm) Ø 300 Speed 5,000 - 25,000 kW 15 Voltage 380V Hertz 50 Including: Max. auto feed 15.000 mm/min Max. feed carriage 21.700 mm /min Angle grinding head 0 - 55 degrees Helical pitch 10 - 90.000 mm Max. positioning movement of grinding head 10 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

workpiece length: 5000 mm swing dia.: 1100 mm clamping length: 6000 mm grinding diameter: 1100 mm grinding wheel diameter: 1300 mm workpiece weight: 2500 kg main drive motor: 22 kW crankshaft bearing diameter: 275 mm steady: 100-250 mm speeds of tool: 400/500 U/min workpiece turning speeds: 20-40 U/min total power requirement: kW weight of the machine ca.: 30 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

rotary table dia.: - mm max. dia. of grinding wheel: 150 x 25 x 20 mm with manual ongoing: - 0 power capacity: 0,5 kW turning speeds: 1450 U/min voltage: 230 V Weight: 17 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width of the strips: 150 mm band length: 2000 mm band speed: 30 m/min : 200 x 150 x42 mm : 605 mm : 630 m³h total power requirement: 4,8 PS weight of the machine ca.: 100 kg dimensions of the machine ca.: 1025 x 600 x 1000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width of the strips: 75 mm band length: 2000 mm band speed: 30 m/sec : 200 x 75 x 42 : 605 mm : 630 m³h total power requirement: 4,1 ps weight of the machine ca.: 90 kg dimensions of the machine ca.: 1025x500x1000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width of the strips: 75 mm band length: 2000 mm band speed: 30 m/sec : 200 x 75 x 42 : 605 mm : 630 m³h total power requirement: 4,1 ps weight of the machine ca.: 76 kg dimensions of the machine ca.: 1025 x 500 x 1000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Grinding wheel, bench grinder, surface grinder, cylindrical grinder -Inside: Ø 127 mm -External: Ø 300 mm - Width: 18mm -Price per piece -Number: 1 piece available -Weight: 1.9kg

Grinding wheel, bench grinder, surface grinding machine, cylindrical grinding machine -Inside: Ø 32 mm -Outer: Ø 250 mm -Width: 8 mm -Price: per piece -Number: 10x available -Weight: 0.9 kg

Grinding wheel, bench grinder, surface grinding machine, cylindrical grinding machine -Inside: Ø 32 mm -Outer: Ø 250 mm -Width: 6 mm -Price: per piece -Number: 40x available -Weight: 0.6 kg

Grinding wheel, bench grinder, surface grinding machine, cylindrical grinding machine -Inside: Ø 32 mm -Outer: Ø 250 mm -Width: 8 mm -Price: per piece -Number: 50x available -Weight: 0.9 kg

width of the strips: 150 mm band length: 2000 mm band speed: 2800 - 3300 m/sec : 200 x 150 x 42 mm grinding head for face-and peripheral grind.: 477 mm total power requirement: 7,5 PS weight of the machine ca.: 90 kg dimensions of the machine ca.: 1965 x 605 x 1350 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width of the strips: 150 mm band length: 2000 mm band speed: 30 m/sec : 200 x 150x 42 mm : 605 mm suction capacity: 605 m³h total power requirement: 4,8 ps weight of the machine ca.: 114 kg dimensions of the machine ca.: 1025 x 600 x 1000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Grinding wheel, bench grinder, surface grinding machine, cylindrical grinding machine -Inside: Ø 32 mm -Outer: Ø 300 mm -Width: 4 mm -Price: per piece -Number: 5x available -Weight: 0.6 kg

Grinding wheel, bench grinder, surface grinding machine, cylindrical grinding machine -Inside: Ø 32 mm -Outer: Ø 300 mm -Width: 6 mm -Price: per piece -Number: 6x available -Weight: 0.8 kg

Grinding wheel, bench grinder, surface grinding machine, cylindrical grinding machine -Inside: Ø 32 mm -Outer: Ø 300 mm -Width: 4 mm -Price: per piece -Number: 8x available -Weight: 0.6 kg

Grinding wheel, bench grinder, surface grinding machine, cylindrical grinding machine -Inside: Ø 32 mm -Outer: Ø 300 mm -Width: 4 mm -Price: per piece -Number: 8x available -Weight: 0.6 kg

Grinding wheel, bench grinder, surface grinding machine, cylindrical grinding machine -Inside: Ø 32 mm -Outer: Ø 300 mm -Width: 12 mm -Price: per piece -Number: 3x available -Weight: 1.7 kg

TACCHELLA ELEKTRA 1518 MPC CNC grinding machine was built in Italy in 1999. Characterised by high reliability and performance, the machine is used in the process of highly accurate grinding of the external rotating surfaces of workpieces with a maximum length of 1500 mm and a diameter of 350 mm. The TACCHELLA CNC shaft grinding machine has a large workspace with tailstock, grinding wheel spindle and workpiece spindle. After placing a shaft with a maximum weight of 50 kg in the spindle holder, the workpiece is ground at high speed by an incremental encoder driven grinding wheel with a maximum diameter of 450 mm. In order to simplify the machining process, the ELEKTRA 1518 MPC CNC grinding machine is equipped with state-of-the-art features, such as the HOFLER BALANCE SYSTEMS VM 24 operator panel and a functional and user-friendly FAGOR CNC controller, which allows full control of the m ...

Key data: 250 , 95

Center distance: 250 mm Grinding head Z-axis: 0 mm Center height: 95 mm Technical data Centre height: 95 mm Distance between centres: 250 mm Table length: 450 mm Table width: 175 mm Max. grinding diameter: 130 mm Longitudinal way of table: 260 mm Transversal way of the table: 50 mm Vertical adjustment of the table: 50 mm Table swivels: 360 ° Slewing range of grinding head: horizontal: 360 ° vertical: 220 ° Grinding spindle speeds: number (steps): 2 from: 3750 rpm up to: 7500 rpm Voltage 50 Hz 3x: 380 Volt Grinding spindle motor: 0.50 HP Total power required: 0.7 HP Machine´s weight about: 450 kg Overall dimensions machine: Length: 1000 mm Width: 600 mm Height: 1400 mm Various accessories: Dividing attachment Tailstock Vice: width: 80 mm

With matching spacer rings according to photos. Scope of delivery according to photo 1.

Band width: 150mm; Belt length: 3000mm; Table size: 960mm x 352mm; Additional table: 330mm x 330mm; Veneer sanding equipment: yes; Oscillation: yes; Grinding unit swivel: yes; Suction port: 120mm; Motor power: 3 kW; Machine length: 1900mm; Machine width: 810mm; Weight: 290kg; Heavy-duty machine stand guarantees high torsional rigidity and vibration-free working Better sanding results thanks to sanding belt oscillation via separate gear motor Oscillation optionally switchable Veneer edge sanding device with fine adjustment as standard Grooved infeed ruler for sanding veneer protrusions Quick changeover from veneer to solid wood pulp Height-adjustable grinding table for utilization of the entire abrasive belt width Height adjustment of the grinding table and swivel of the grinding unit via handwheels Height-adjustable additional table with suction for grinding radii Optimum ch ...

Band width: 200mm; Belt length: 3000mm; Table size: 960mm x 352mm; Additional table: 330mm x 330mm; Veneer sanding equipment: yes; Oscillation: yes; Grinding unit swivel: yes; Suction port: 120mm; Motor power: 3 kW; Machine length: 1900mm; Machine width: 900mm; Weight: 310kg; Grinding unit can be swivelled up to 45Â via lever The machine stand made of welded steel guarantees high torsional rigidity and vibration-free working. Oscillating sanding belt with separate gear motor for better sanding results Oscillation can be switched on optionally Grinding sole with graphite coating for a longer service life of the abrasive belt Height-adjustable sanding table for utilisation of the entire sanding belt width Height-adjustable additional table with suction for sanding radii The spring-loaded belt tension automatically compensates for strip length differences. With double suction  ...

Center distance: 0 mm Grinding head Z-axis: 0 mm Center height: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 300 mm Distance between centres: 380 mm Table length: 1100 mm Max. grinding diameter: 238 / 620 mm Max. grinding wheel diamter: 125 mm Longitudinal way of table Transversal way of the table: 220 mm Vertical adjustment of grinding head: 325 mm Slewing range of grinding head: horizontal: 360 ° vertical: 360 ° rotary axis of the grinding spindle head: 360 ° Grinding spindle speeds: number (steps): 2 from: 2000 rpm up to: 10000 rpm Voltage 50 Hz 3x: 380 Volt Grinding spindle motor: 2 kW Machine´s weight about: 500 kg Overall dimensions machine: Length: 1100 mm Width: 800 mm Height: 1750 mm Various accessories: Set of collets Set of collets: ESX Lamp Tool cabinet Grinding wheel guard

Cell Berger with grinding robot Kuka KR 180 (external grinding A1) Grinding cell Berger 2012 (external grinding A1) - Total weight approx. 6300 kg - Dimensions of the cell: approx. 4650 x 2400 x 3100 mm 6-axis robot Kuka KR 180 R2500 Extra - Year of construction 2011 - Control KRC 4 - additional axis (7th axis) Belt grinding station BSS10 belt dimensions 3500 x 30 mm - contact disc diameter 200 mm - Motor power 4 kW 2 x polishing stations, - Polishing disc diameter 350 - 600 mm - Power 5.5 kW Gripper change cabinet Belt conveyorsInteroll Automation GmbH - Total length approx. 2000 mm - Bandwidth approx. 440 mm

Cell Berger with SChleif robot Kuka KR 180 (internal grinding I1) Grinding cell Berger 2012 (internal grinding I1) - Total weight approx. 6200 kg - Dimensions of the cell: approx. 4650 x 2400 x 2900 mm 6-axis robot Kuka KR 180 R2500 Extra - Year of construction 2011 - Control KRC 4 - additional axis (7th axis) 2 x Polishing stations, Polishing disc diameter 350 - 600 mm Polishing disc width 100 mm - Power 5.5 kW

Grinding length: 500 mm Grinding diameter: 300 mm Grinding wheel diameter: 400 mm Equipped with: - Bezel - Grinding wheels Country of origin: Germany Machine LxWxH: 2300 x 1700 x 1700 mm Machine Weight: 3500 kg

SCM Long Belt Grinding Machine LS-2500 Product name: Long belt grinding machine Type: LS-2500 Manufacturer: SCM (Villa Verucchio, Spain) Machine number: KK /003701 Condition: used, completely refurbished technical details: - Workbench length: 2,500 mm - Workbench height (depth): 800 mm - vertical stroke of the workbench: 720 mm - Length of sanding belt: 7,100 mm - Width sanding belt: 150 mm speed sanding belt: 18 m/sec - Crank depth: 800 mm - Crank height: 126 mm - Diameter of pulleys: 250 mm - 2 x suction opening a 120 mm Engine data: - Voltage: 380 V - Current: 7.1/5.3 A - Power: 3/2.2 kW - Frequency: 50 Hz - Speeds: 2800/1400 rpm Installation dimensions (W x D x H): 3,835 x 2,231 x 1,650 mm (without suction connections!) Transport dimensions (W x D x H): 3,900 x 1,500 x 1,850 mm (mounted on metal carrier!) The machine was completely refurbished and ...

Grinding range: 400 x 200 mm Magnet table: 400 x 175 mm Height adjustment: 410 mm Grinding wheel dimensions: 225 x 25 x 50.8 mm Grinding wheel speed: 1420 / 2840 rpm. Equipped with: - Coolant device - Band filter - Hydraulic system - Operating instructions Country of origin: Germany Motor power: 1.5 kW Machine LxWxH: 2200 x 1500 x 2100 mm Machine Weight: 1100 kg

grinding length manual / hydraulic 710 mm / 650 mm grinding width 300 mm Vertical adjustment of the grinding spindle 400 mm Grinding spindle speed 1,425 rpm Grinding wheel dimensions 355 mm x 31 mm x 127 mm Drive power of the grinding spindle motor 3.7 kW

Sandpaper, emery paper, abrasive cloth, sanding discs, grinding wheels -Outer diameter: 300 mm -Width: 40 mm -Interior diameter: 51 mm -Weight: 6.2 kg

Sandpaper, emery paper, abrasive cloth, sanding discs, grinding wheels -Outer diameter: 400 mm -Width: 50 mm -Inside diameter: 30 mm -Weight: 14 kg

SPECIFICATIONS: Grinding/calibration line Editing: from above and below 2 motors with 18.5 KW each Cardan drive Sanding belt dimensions mm: 2,620 x 1,180 Vacuum carpet

Sandpaper, emery paper, abrasive cloth, sanding discs, grinding wheels -Outer diameter: 405 mm -Width: 50 mm -Inside diameter: 203 mm -Weight: 10.5 kg

Kellenberger 1000U Rondslijper €15,000 (EUR) Contact or call +31 (0)73 - 547 87 69 Specifications Manufacturer Kellenberger Model 1000U Use State Status For Sale

Sandpaper, emery paper, abrasive cloth, sanding discs, grinding wheels -External diameter: 500 mm -Width: 50 mm -Inside diameter: 127 mm -Naxos Union: NK 16/11 P -Weight: 23 kg

Jung JF520 Vlakslijpmachine €20,000 (EUR) Contact or call +31 (0)73 - 547 87 69 Description Grinding length Max. 600 mm Clamping surface of the table 600 x 200 mm Magnet size Max. 500 (max. 600) x 200 mm Maximum distance between table surface and center of the grinding spindle 495 mm Grinding wheel dimensions (TxWxD) 250x25x51 mm Grinding spindle drive 5,5kW Specifications Manufacturer Jung Model JF520 Year 1977 Use State Capacity 600x200 Status For Sale

Sandpaper, emery paper, abrasive cloth, sanding discs, grinding wheels -Outer diameter: 505 mm -Width: 65 mm -Interior diameter: 51 mm -Weight: 32 kg

Sandpaper, emery paper, abrasive cloth, sanding discs, grinding wheels -Outer diameter: 555 mm -Width: 110 mm -Inside diameter: 203 mm -T1707801 -Weight: 50.5 kg

Jung HF50 Vlakslijpmachine €4,750 (EUR) Contact or call +31 (0)73 - 547 87 69 Specifications Manufacturer Jung Model HF50 Use State Capacity 600x200 Status For Sale

Jung F-40 vlakslijpmachine €3,750 (EUR) Contact or call +31 (0)73 - 547 87 69 Specifications Manufacturer Jung Model F-40 Use State Capacity 160x400 Status For Sale