costa 톱 사용 판매를 위해

SPECIFICATIONS: Grinding/calibration line Editing: from above and below 2 motors with 18.5 KW each Cardan drive Sanding belt dimensions mm: 2,620 x 1,180 Vacuum carpet

Catalog No. 6809 TECHNICAL DATA - track width 350mm - roller width 370mm - max cutting height 200mm - max disc diameter 300mm - disc hole diameter 80mm in advance: - repellants - pressing sliding shaft - repellants - 2 smooth sliding shafts - repellants - shaft with saws 75kW - 3 smooth sliding shafts - repellants - smooth sliding shaft from down: - sliding roller - repellants - caterpillar - shaft with saws 95kW - caterpillar - 1 output shaft, toothed, pulling - rollers pressed pneumatically - max disc diameter 300mm - electric lifting of the upper body up/down 1.1 kW - automatic central lubrication - smooth adjustment of the feed speed 3kW - diameter of the exhaust connection 190mm, 200mm - feeding table with guide and pneumatic clamp rolls in the feeder: - 1 sliding, 9 pulling - dimensions of the feeder length / width / height 6520x1300x1050mm - dim ...

SECOND-HAND WIDE BELT SANDER COSTA MOD. 60 CC/2 1150 - CE RULES - Working width 1150 -Volt. 380/50 - S/N 951121/DR3 - Year 1996

CATALOG NO. 6911 TECHNICAL SPECIFICATIONS - track width 350mm - shaft width 370mm - max cutting height 200mm max dial diameter: - on the upper shaft 340mm - on the bottom shaft 300mm - disc bore diameter 80mm in advance: - repellers - 2 pressure sliding shafts -Pressure - shaft with saws 37kW - 2 smooth sliding shafts from below: - introductory table + guide strip - repellers -caterpillar - shaft with saws 37kW -caterpillar - 1 output shaft, slip, smooth - pneumatically pressed rollers - max disc diameter 300mm - electric lifting of the upper body up / down 1,1kW - automatic central lubrication - electrically adjustable smooth regulation of the feed speed 3kW - diameter of extraction connection 230mm, 250mm - dimensions length / width / height 3000x2300x1900mm - weight about 5000kg ADVANTAGES – Italian production – two-shaft – used multi-saw, very good condition Net price: 19890 ...

SPECIFICATIONS: Sanding belt size: 1380 x 2620 mm Max. working height: 160 mm Diameter of the rollers: 250 mm 3 independent motors total KW 36.0 Electronic Band Oscillation Front and rear support rollers Speed variator Pneumatic Shoes Hardness of the rubber rollers Reel I: 90 sh Reel II: 75 sh III Reel: 55 sh

SPECIFICATIONS: Processing width: max. 1400 mm 2 adjustable speeds Motor 1: 30 kW Motor 2: 22 kW COMPOSITION: Group I: Steel roller Ø 400 mm Group II: 2 steel rollers of Ø 130 mm each

For sale is an entire fully CNC-controlled planing mill. The planing mill can be visited during operation. A visit training is possible when buying before dismantling. The system has been in reliable operation since 1981 and has always been professionally maintained. Equipment: 1. Stacking Task 2. Rupa vacuum lifter - Age: approx. 1.5 years 3. Cross Conveyor 4. Canali Cut-off Band Saw - 2 band saws 5. Longitudinal/transverse conveyor incl. roller conveyors 6 Costa planing machine with 10 spindles - Fully CNC controlled Spindle configuration: 1 spindle horizontal 2 Lifting spindle right vertical 3 Lifting spindle left vertical 4 Lifting spindle horizontal 5 Lifting spindle right vertical 6 Lifting spindle left vertical 7 Lifting spindle top horizontal 8 Lifting spindle bottom horizontal 9 Lifting spindle at the bottom horizont ...

Multi-Blade Saw Costa Leopard S Year: 1981 Cutting height 220mm 2x75hp new conveyor belt, replaced in 2015 Width chain: 370mm Cross conveyor 5 strands

Manufacturer: Costa, Type: Strettoio, Year: 1999, Work piece width min-max mm: 180, Min.-max. workpiece length in mm: 2200, Stages: 5, Year :1999

Manufacturer: Costa, Type: SbF , Year: 1999, Sanding width mm: 1350, Sanding hight mm: 3-150, Number of sanding belts: 1, Rubber roller: yes, Band 1 Leistung kW : 15, Transportbandantrieb kW: 1,1, Brushing unit: yes, Year :1999

Satin sander COSTA LEVIGATRICI model S A2 TS 1350 : – with electronic PCM control and touch-screen video – useful working width 1350mm – useful working thickness from 3 to 160mm – variable feed speed from 5 to 25 m/min – with perforated belt and depressor – n° 1 belt unit with pad, 2620mm belt development, with air blowers belt cleaning – n° 1 scotch-brite group (inside the machine) Year 2000, CE regulations

Manufacturer: Costa, Year: 1999, Foil stations: yes, Shrinking tunnel mm: 1700, Year :1999

Manufacturer: Costa, Type: KA CCC 1350, Year: 2003, Control: Costa, Sanding width mm: 1350, Sanding hight mm: 160, Number of sanding belts: 3, Sanding belt dimensions: 1350 X 2620, Rollers: 3, Längsschleifaggregate: 3, Bürstenaggregate: 1, Steel roller: 2+1 Gummi, Bürstenaggregate: 1, Band 1 Leistung kW : ca.20, Band 2 Leistung kW : ca.20, Band 3 Leistung kW : ca.20, Continous adjustable feeding speed m/min: 5-15, Transportbandantrieb kW: 2,2, Constant table hight: yes, Brushing unit: yes, Year :2003

Manufacturer: Costa Inert Trocknung, Type: C X C 1350, Year: 2011, Work piece width min-max mm: 50-1350, Min.-max. workpiece height in mm: 3-120, Working widht max mm: 1300, Number of lamps: 1, kW power 1 lamp: 10, Gesamtlänge UV Modul mm: 1300, Lamps straight installation: yes, Adjustable: yes, Elektronische Leistungregelung: yes, Position of lamps: gerade, Power per lamp watt UV: 60-120, Feeding speed m/min: 5-20, Conveyor: Band, Exhaust air diameter mm: yes, Feedin speed m/min: 6-25, Belt conveyor: yes, Year :2011

Manufacturer: Costa, Type: Lince, Year: 1999, Cutting widht mm: 300, Power engine kW: 58, Year :1999

Manufacturer: Costa, Type: Nastro, Year: 1999, Length mm: 2300, Working widht mm: 400, Drive power kW: 0,3, Year :1999

Key data: 1350 mm, 2 st.

CALIBRATING SANDING machine with 2 belts (2 independent motors) model COSTA series SK 5 CC 1350 second-hand machine working conditions Excellent , machine as new machine with inverter on the belts and on the carpet fixed table, moving head machine with CE regulation: YES instruction booklet, CE declaration of conformity: YES for wood, furniture, custom-made furniture, wooden frames, doors, panels, composite materials, plastics and various technical data : max. working width mm. 1350 max working height mm. 160 min working height mm. 4 dimensions of abrasive belts mm.1380 x 2620 advancement speed belt , with inverter , from 3 to 15 m/min (motor power Kw 1.1) automatic centering perforated carpet (there is no vacuum group) composition (2 belts, 2 independent motors) : 1st unit : rubber calibrating roller - diameter mm 200 - shore 85 - motor power Hp 10. with inverter  ...

Manufacturer: Costa Breitbandschleifmaschine, Type: CCT/1350, Year: 1995, Monting of the machine: Stahlwalze/Gummiwalze/Schuh, Sanding width mm: 1350, Sanding hight mm: 150, Number of sanding belts: 3, Sanding belt dimensions: 2620 X 1350, Steel roller: yes, Band 1 Leistung kW : ca.30, Band 2 Leistung kW : ca.30, Band 3 Leistung kW : 17, Continous adjustable feeding speed m/min: 10-25, Transportbandantrieb kW: ca.3, Constant table hight: yes, Vacuum table: yes, Brushing unit: yes, Weight in kg: ca.8000, Year :1995

Manufacturer: Costa, Type: T 1350, Year: 1998, Monting of the machine: schuh/Bürste, Sanding width mm: 1300, Sanding hight mm: 150, Number of sanding belts: 1, Sanding belt dimensions: 3250 X 1350, Längsschleifaggregate: ca.17, Bürstenaggregate: yes, Band 2 Kombiaggregat Walze/Schuh: 10-20, Belt 4 pressure segment belt: yes, Belt 4 synchronous and reverse run: 32, Elektronische Tastung mm: yes, Table hight adjustment by engine: ca.1,5, Transportbandantrieb kW: yes, Abrasive belts at bottom: yes, Intermediate sanding of lacquer: yes, Programmanwahl extern: yes, Year :1998

Manufacturer: Costa Giardina Tomanin, Type: Hochglanzlackierstrasse, Finished product: Hochglanz und Glaslackierung, Work piece width min-max mm: 150-1300, Min.-max. workpiece height in mm: 3-80, Min.-max. workpiece length in mm: 150-2800, Feeding speed min-max m/min: ca.10, Inlet conveyor: yes, 2 paint roller: 2 Stück Tomanin Lackwalze, 2 UV dryer lamps/Watt: 1 Lampen Giardina 80 Watt, 3 UV dryer lamps/Watt: 2 Lampen UV<CRLF>Giardina 80-120 Watt, Sanding machine: Costa Lackschleifmaschine Quer/längs, Available: sofort,

Manufacturer: Costa Lackschleifmaschine, Type: C 1350, Year: 1999, Control: Costa, Sanding width mm: 1300, Sanding hight mm: 120, Number of sanding belts: 1, Sanding belt dimensions: 2620 X 1350, Rubber roller: yes, Shore roller 1: 40, Band 1 Leistung kW : 36, Band 1 Schleifbandgeschwindigkeit m/s : ca.5-20, Intermediate sanding of lacquer: yes, Constant table hight: yes, Vacuum table: yes, Noise enclosure: yes, Workpiece emitting device nozzles: yes, Year :1999

Manufacturer: Costa, Type: SbF, Year: 1999, Control: Costa, Sanding width mm: 1350, Sanding hight mm: 3-150, Number of sanding belts: 1, Sanding belt dimensions: 2620 X 1350, Table hight adjustment by engine: yes, Rollers: 1, Rubber roller: yes, Shore roller 1: ca.35, Längsschleifaggregate: 11, Belt 1 shoe unit: regelbar, Band 4 Schleifbandgeschwindigkeit m/s : yes, Table hight adjustment by engine: yes, Elektronische Tastung mm: 5-25, Separation of sampling in mm: 0,25, Continous adjustable feeding speed m/min: yes, Abrasive belts at bottom: yes, Intermediate sanding of lacquer: yes, Constant table hight: yes, Year :1999

Manufacturer: Costa, Type: CCC + CCC 1150, Year: 1998, Monting of the machine: obenWalze/Walze/Walze , Equipment of machine 2: untenWalze/Walze/Walze, Double sided sanding line: yes, Sanding width mm: 1150, Sanding hight mm: 120, Number of sanding belts: 6, Sanding belt dimensions: 2620 X 1150, Table hight adjustment by engine: yes, Rubber roller: 3 +3, Shore roller 1: 70, Shore roller 2: 70, Walze 3 Shorehärte : 60, Längsschleifaggregate: ca.34, Belt 2 shoe unit: ca.22, Belt 2 synchronous and reverse run: ca.17, Belt 3 synchronous and reverse run: 34/22/17, Table hight adjustment by engine: yes, Combi unit roller/shoe: 8-20, Table hight adjustment by engine: ca 3 + 3, Abrasive belts at bottom: yes, Intermediate sanding of lacquer: yes, Programmanwahl extern: yes, Pressure pads for short workpieces: 150, Year :1998

Manufacturer: Costa Kalibrieranlage, Type: KA CC 1350, Year: 2007, Control: Siemens/KEB, Monting of the machine: 2x Stahlwalze geriffelt, Sanding width mm: 1350, Sanding hight mm: 120, Number of sanding belts: 2, Sanding belt dimensions: 2620 X 1380, Table hight adjustment by engine: yes, Steel roller: 2, Längsschleifaggregate: 30, Belt 2 shoe unit: 22, Band 2 Schrägstellbar Grad : no, Band 2 Innenliegendes Drucklamellenband : nur Gegenlauf, Table hight adjustment by engine: yes, Elektronische Tastung mm: 8-20, Separation of sampling in mm: 2,2, Table hight adjustment by engine: variabel, Continous adjustable feeding speed m/min: yes, Constant table hight: no, Brushing unit: yes, Werkstück-Abstrahleinrichtung: 3400, Diameter/ brush bristles: yes, wast cleaning: Pneumatische Absaugvorrichtung dabei, Oszilation dabei, Year :2007

Hersteller : Costa, Type: Optima 2000 CNC, Year: 1993, Control: CNI, Positioning of CNC axis: yes, Double edge bander: yes, Hand-over: yes, Longitudinal edge banding: yes, Sanding machine: no, Tool exchange places: yes, Working width min-max mm: 320-4000, Arbeitshöhe min-max mm: 30-100, Saw Units: 1, Double edge bander - milling units/side total: 1, Spindle length of double edge bander mm: 620, Double edge bander with stoppers: yes, Longitudinal milling units total: 5, Längsprofiler Fräsaggregate linke Seite: 2, Längsprofiler Fräsaggregate rechte Seite: 2, Längsprofiler Fräsaggregate linke Seite: 2, Longitudinal milling units horizontally: 1, Spindle length - longitudinal milling mm: 320, Spindle diameter - longitudinal milling mm: 50, Feeding speed min-max m/min: 2,5-23, Vorschub stufenlos: yes, inkl Werkzeuge, Year :1993

Various old sawmill machines are available. 1) Double shaft saw Costa Leonard, max. cutting height: 200mm, max. cutting width: 350mm, weight: approx. 5000kg. 2) Step feeder Esterer WD, max. log length: 6000mm. 3) Frame saw Esterer HD 30, frame opening: 710mm, stroke: 600mm. Including accessories. 4) Multi blade saw Costa Multiprisma 35, max. log length: 6000mm. 5) Drum chipper Zeno, drive power: 55kW. 6) Board stacking machine Zimac, working length range: 800mm-3000mm. 7) Steel chimney stack Schicks, height: approx. 50m, diameter: approx. 1400mm. Documentation available. An on site inspection is possible. Individual sale possible by arrangement.

mobile extraction Brand:SCHUKO Typ: Vacomat 200 XPe Techncal data: Connection Ø: 200 mm Filter cleaning: motorical Nominal volume flow: 2262 m³/h Motor power: 4,0 kW Filter surface area: 14,5 m² Dust level M, AWN 16 Noise absorbation: 73 dB(A) Test sign H3 / BGHM HO 123027