weg 発電 機 中古 販売のため

Three-phase motor brand new, WEG-Bosch, 280S/M02, IP55, B3, 2,980 rpm, 75/85 kW, 380/660 V, also suitable for 415, 440, 460 V, 50/60 HZ

Three-phase motor, electric motor -Power: 0.09 kW -Speed: 1360 rpm -Shaft: Ø 10 mm -Construction: B14 -Flange: Ø 80 mm -Price: per piece -Number: 3x available -Dimensions: 235/142/H180 mm -Weight: 4 kg

Three-phase motor, electric motor -Power: 0.12 kW -Speed: 2750 rpm -Shaft: Ø 10 mm -Construction: B14 -Flange: Ø 80 mm -Price: per piece -Number: 1x available -Dimensions: 235/142/H180 mm -Weight: 4 kg

WEG NBR 7094~ ~ 3 160 M No. 0298 NA 98795 INDUCTION MOTOR M2 60 COD: N HP 15 (20) RPM: 3540 F3 1.15 (53) F 80 K 7.7 IP 55 220/380/440 V 50.0/ 28.9/25.0 A

HYDRAULIC PUMP WEB NBR 7094 3 ~ 90 S 11/06/2006 HG 1576 INDUCTION MOTOR 60 HZ CN N HP (HP - CV )1.5 (2.0) RPM: 1740 TS 1.15 220/380 V 6.12/3.54

A used newly stored electric motor is offered see pictures. Price is a matter of negotiation.

Gear motor, electric motor, three-phase motor -Speed: 153 rpm -Power: 0.18 kW -Voltage: 220 V -Construction: B3 angle -Shaft diameter: Ø 12 mm -Protection class: IP 44 -Number: 1x engine available -Price: per piece -Dimensions: 290/125/H180 mm -Weight: 5.7 kg

electric motor, three-phase motor -Condition: unused -Manufacturer: Weg, electric motor type W22 315S/M-04 -Power: 132 kW -Speed: 1488 rpm -Shaft: Ø 80 x 170 mm -Design: B3 -Protection class: IP 55 -Dimensions: 1280/640/H845 mm -Weight: 991 kg

An unused explosion-proof three-phase motor WEG is available. Power: 37kW, voltage: 380V-415V/660V/460V, frequency: 50Hz, number of poles: 2, size: 200M/L, degree of protection: IP56, explosion protection: Ex eb, zone: 1, group: IIB, temperature class: T4 (135°C), cooling type: TEFC (surface-cooled with closed fan), insulation class: E, temperature class: G, operating mode: S1. Documentation available. On-site inspection is possible.

Three-phase motor, electric motor -Condition: unused -Manufacturer: Aerzen Weg, Electric motor type: 200L-02 -Power: 30 kW -Speed: 2970 rpm -Shaft: Ø 55 x 110 mm -Design: B3 -Protection rating: IP55 -Number: 3x motors available -Price: per piece -Dimensions: 770/400/H510 mm -Weight: 226 kg/unit

gear motor, electric motor, three-phase motor -Manufacturer: Weg, gear motor type ODGM 734 -Speed: 94 rpm -Power: 0.37 kW -Shaft: Ø 20 x 40 mm -Dimensions: 180/160/H390 mm -Weight: 12.8 kg

Electric motor, three-phase motor -Manufacturer: ATB Bauknecht, electric motor explosion-proof -Type: 180L-4 -Power: 22 KW -Speed: 1465 rpm -Shaft: Ø 48 x 110 mm -Design: B5 -Protection class: IP54 -Dimensions: 700/475/H350 mm -Weight: 219 kg

Gear motor, electric motor, three-phase motor, feed motor -Manufacturer: Weg, gear motor with attachments -Engine: Type ODG 732 T/372 -Power: 0.55 kW -Gearbox: Type ZB 4824 i= 645 -Drive wheel speed: 30 rpm -Dimensions total: 360/250/H350 mm -Weight: 31.1 kg

Electric motor, three-phase motor -Condition: Electric motor is unused -Manufacturer: Weg, electric motor type W22 250S/M-02 -Power: 55 kW -Speed: 2970 rpm -Shaft: Ø 60 x 140 mm -Design: B3 -Protection class: IP 55 -Number: 5 electric motors available -Price: per piece -Dimensions: 960/510/H640 mm -Weight: 559 kg

electric motor, three-phase motor -Condition: unused -Manufacturer: Weg, electric motor type W22 280S/M-02 -Power: 90 kW -Speed: 2970 rpm -Shaft: Ø 65 x 140 mm -Design: B3 -Protection class: IP 55 -Quantity: 1 electric motor available Price: per piece -Dimensions: 1070/560/H745 mm -Weight: 692 kg

gear motor, electric motor, electric gear motor, worm gear motor -Manufacturer: Bosch WEG, worm gear motor -Gearbox: Bosch Type FRT 3 842 503 063 -Speed: approx. 36 rpm -Motor: WEG type OD 534 T 0.09 kW -Protection class: IP44 -Shaft: Hexagon 17 x 70 mm -Number: 3x gear motor available -Price: per piece -Dimensions: 270/110/H165 mm -Weight: 4.9 kg/pc.

Nadelstrukturierer Votan G08 Jenoptik mechanical Ritzer 2012 the Votan again for 160.000,00 euros on the new glass substrates and latest requirements was converted and was no longer in use. Complete unit incl 2 x belt transport table, suction, control Built in 2005 Shipping: 400,00 € (weight ca. 4500 kg)

Year of construction 2009 like new condition, has worked only sporadically 1 year, Looks machine like new inside The machine is CNC controlled, for the mechanical structuring of thin-film solar cells. The processing heads move over that with a layer of molybdenum metal or other sputtered Glass, with a format 125 x 65 cm, and create an insulating track by material removal. The CNC control controls the movement of the X-, Y-, Z-, A-, and U-axis. all documents, Control Panel, and control are available Original price: 847.000,00 € The complete unit to build a 75MW of production are available. (1 x laser, 2 x mechanical structuring and setting device for needles) Geamt-new value 2.1 mill euro net