schunk 工作機械用アクセサリー 中古 販売のため

SCHUNK 2 finger parallel grippers and Rotary unit new Parallel grippers: PFH 40-AS / 302041 Rotary unit: OSE-A34-4 / 354304 Good condition fully functional can be visited on site and tried out. Shipping abroad. Visit: Basically I would like to point out that the article may be viewed and tested under power to exclude misunderstandings, like before you buy. Please ask questions before you purchase to avoid ambiguity. For general questions or an appointment for a visit I am at the below telephone number, available. Errors in the description and intermediate sale is reserved. Shipping with freight forwarding.

Ref. -No.: 10055 Manufacturer: SCHUNK Storage location: Mülheim an der Ruhr Country of origin: Deutschland outer diameter: 250 mm Inside diameter: 80 mm

diameter: 315 mm bore diameter: 91 mm turning speeds: 4000 U/min weight of the machine ca.: 72 kg Like new 2 Jaw power chucks, - Quick change system - 1 set ground jaws The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws -Manufacturer: Schunk, Top jaws for power chucks, 3 sets -Type: SFA-AL 315, see photos -Hole spacing: 54 mm -Price/Sale: only complete set -Overall dimensions: 160/215/H90 mm -Weight: 6.8 kg

Interchangeable jaws, top jaws, three-jaw chucks, clamping jaws -Manufacturer: Schunk, soft top jaws 1 set = 3 pieces -Type: SWB-FR 131 -Dimension box: 75/90/H50 mm -Weight: 1.1 kg

Interchangeable jaws, top jaws, three-jaw chucks -for: Power chucks -1 sentence: hard cheeks -4 sentence: soft cheeks -Hole spacing: 44 mm -With: chamfered groove and pointed teeth Price: complete -Weight: 50 kg

As good as new reversible base jaws Insert: Three-jaw chuck with helical toothing, also power chucks. Manufacturer: Three-jaw chuck FORKARDT-F400; RÖHM-Duro-400→ (FOKARDT; ROHM; SCHUNK; KITAGAWA) Name of the base jaws: for example: MFG 400; SFG400 Three-jaw wedge rod chuck ø 400mm: Hand chuck F400; F500L DURO400; DURO 500 Rota-S 400; Rota-S500 THW500 F B= width; H height; L= Length; S=N_backe; N= cross groove for interchangeable jaws; La= hole spacing; J=Za= tooth spacing; S= groove for top jaw or base jaw W = 45 mm H = 55 mm L = 160 mm N = 30mm S = 18mm La= 60mm Thread M16 x 1.5 Weight approx. 9-10 Kg /set

Interchangeable jaws, top jaws, three-jaw chucks -for: Power chucks -4 sentence: hard cheeks -7 sentence: soft cheeks -With ground groove and pointed tooth pitch: 1.5 mm -Price: complete -Weight: 6 kg

Positioning ring, clamping ring, clamping pallet, short taper, shuttle table -Type: SRB 120 -for: NSA plus static tethering station -both sides: ground -Clamping rings: with ground short cone for positive locking connection of the clamping pallets or devices with the clamping modules. -Form-fit connection: between clamping pallet and NSA plus clamping station. -Quantity: 25x available Price: per piece -Dimensions: Ø 118/H19 mm -Weight: 0.8 kg

For sale are several hydraulic expansion chucks from Schunk Prices and other inventory on inventar-verkauf.de/id/alesco The condition is used. There are usual signs of wear. I would be happy to make an offer for all of them in the package.

- Clamping force 4 - 30 kN - Weight 19.5 Kg - Single stroke vice

Productkenmerken: - 4-klauw compensatiespantang - Centrische compensatie van de tegenoverliggende kaken - Spindelhouder: ISO 702-4 Nr. 8 (Z220) - Bekinterface: 1/16 x 90° Moer 17H7 Technische gegevens: - Slag per kaak: 9,5 mm - Compensatieslag per kaak: 5,1 mm - Maximale klemkracht: 100 kN - Maximaal koppel: 120 Nm - Maximale rotatiesnelheid: 2200 1/min - Gewicht: 63 kg

Technical Description – Schunk ROTA 2B 160 Designation: Manual Two-Jaw Wedge-Style Chuck Manufacturer: SCHUNK GmbH & Co. KG Model: ROTA 2B 160 Design: Manually operated wedge-style chuck with 2 self-centering jaws Typical Technical Data: Chuck diameter: 160 mm Number of jaws: 2 Actuation: Manual via chuck key Clamping mechanism: Wedge hook system (for high clamping force and reliability) Central through-hole: approx. 40–45 mm (depending on version) Mounting interface: Flange or direct mount, e.g., DIN 55026 A5 (depending on configuration) Max. clamping force: approx. 30–35 kN (depending on applied torque) Repeatability: typically ? 0.02 mm Application: Suitable for irregular or sensitive workpieces; ideal for use on lathes, indexing fixtures, and custom setups Material: Body and clamping components hardened and ground for extended durability Key Features: Two-jaw version for spec ...

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.