reifenhäuser 押 出 機 中古 販売のため

CoEx plate system net. 1350x1-10 mm Material: PE, PS, HIPS, ABS / Details: Main extruder RH EH2400-1-150-33V, co-extruder RH 121-1-50-30V, vacuum pump, CoEx-block, double hydr. Sieve changer with hydr. Station, wide-slit nozzle 1,450 mm, 3-roller smoothing unit RH GK-1600-60-G1 1,640 x 600 mm, Kelvi Plast temperature control unit, cooling section, side strip trim with knife beam, rubber roller extractor RH AT160-20, guillotine RAS 83.20, vacuum conveyor, CoEx dryer material, stacking device. (Ref-No. T27614)

3-channel foil nozzle EDS FSK-600 with flex lip (tire tubes) Output capacity: 40 -50 kg/h Lip adjustment with screws and storage beams in the main layer Film width: max. 600 mm Film thickness: 0.1 – 3.0 mm 3 computer-calculated hanger channels for optimal melt distribution Distribution: A 10-15%, B 70-80%, C 10-15% Drilled nozzle lip for liquid temperature control 9 heating zones with high-performance cartridge heaters Connected load for nozzle: 18 kW (0.5 kW x 36) Fully wired for 240 V / single-phase Nozzle dimensions (L x W x H): 450 x 650 x 400 mm, weight: 760 kg Coex adapter block for one middle and two outer layers Dimensions adapter (L x W x H): 320 x 210 x 400 mm Remark: Tool steel 1.2311 All flow surfaces are chrome-plated (25-30 μm)

various screws up to diameter 150 mm available

Key data: 50 mm, 30

Used extruder in good condition with screw size: diameter 50 mm x 30v grooved intake and degassing zone Type RH 241-1-50-30v with DC drive 30.2 kW Built in 1993 Immediately available without control cabinet With control cabinet 4-6 weeks delivery time

Key data: 63 mm, 1300

Twin screw extruder, conical Manufacturer: Reifenhäuser Type: BT 1000-2-63 K Year of Make: 1994 Machine No.: 32061 Working hours: 32,303 h Screw geometry: conical for PVC-hard profiles Screw diameter: 63 – 121 mm Screw length: 1300 mm Screw speed: max. approx. 32 1/min. Nominal torque of the gearbox: 1000 daNm Dynamic load rating of the return pressure bearing: 103600 daN Engine power: 43.0 kW, Drive motor: Baumüller DC motor Cylinder heating/cooling zones: 4/3 (air cooling with fan) Adapter heating zones: 1 Tool Heating Zones: 5 Temperature control: digital temperature controller (2 x PSG Multipact 88) Max. permissible mass pressure: 500 bar Output capacity: approx. 150 - 200 kg/h for PVC-hard profiles Accessories: Dosing device and material hopper Extrusion height: 1150 mm Dimensions: 4250 x 1200 x 1750 mm without hopper (LxWxH) Weight: approx. 3000 kg Cond ...

Key data: 35 mm, 25 , 107 U/min

used REIFHÄUSER single screw extruder with screw size: diameter 35mm / 25 ld The extruder is in very good condition Type RT 78-1-35-25 New control cabinet with new motor AC -7,5kW Year of construction 1994 Quickly available

Key data: 60 mm, 25

Blown Film Extrusion Line: Manufacturer: Reifenhäuser / Troisdorf Type: S 100.060 Connection: 220 / 380 Volt Total connected load: approx. 100 amps Film thickness range: 30 - 80 microns max. winding width: 1200 mm Material: LDPE Extruder: Type: S60 Power: 7 to 28 kw Screw diameter: 60mm Screw length: 25D Max. output capacity: 50 kg/h Drive: Elektra Faurndau GmbH Granulate feed via vacuum conveyor Die head: rotating Type: BSR 100 - 250 mm Die insert: 150 mm and 200 mm diameter Heating capacity: 11.2 kW Cooling ring: Cooling ring inserts: 150mm and 200mm diameter Air volume control, lip adjustment Flattening and pull off device: Adjustable side boards for foil flattening Side gusset insertion device Pull-off rollers Winder: 2 digits - tandem wrapper manual winding shaft insertion device Winding System: Tangential Winder pneumatic roller lifter Max ...

Winder : Bandera Model W 400/1 Contact winder / surfacewinder Roll diameter max: 1200mm Roller width: 1200mm Roll width max: 1100mm Speed: max. 55m/min Longitudinal cutting device 2 or multi-lane Side Slitting Device Automatic roll change Cross-cutting device Role magazine Calibration device Reifenhäuser Low-friction rollers motor adjustment Adjustment range: for 500-1100mm laying width takeoff unit: Type TPE-1200 Side gusset insertion device Drive: 4-pole 4kW with axial fan Electric cabinet

Reifenhäuser FM 1300-01 Blown Film Extrusion Line + 250kg Hoist Overview For sale is a heavy-duty tubular film extruder (blown film line) manufactured by the highly reputable German brand Reifenhäuser. Designed to produce continuous plastic film rolls (LDPE, LLDPE, HDPE), this machine is a solid piece of industrial engineering (Made in West Germany). The lot also includes a 250kg industrial hoist, making it a comprehensive package for plastics manufacturing facilities looking to expand their film blowing capacity. Key Technical Specifications Manufacturer: Reifenhäuser GmbH & Co. Maschinenfabrik Model: FM 1300-01-A1 Year of Manufacture: 1989 Machine Number: 34031 Condition: Used (Dismantled) Production Capabilities Film Type: Blown Film (LDPE, LLDPE, HDPE) Flat Film Width: Up to ~1300 mm Bubble Diameter: Approx. 800 – 1300 mm Typical Thickness: 2 ...

Key data: 63 mm, 1300

Twin screw extruder, conical Manufacturer: Reifenhäuser Type: BT 1000-2-63 K Year of construction: 1994 Serial No.: 32061 Working hours: 32,303 h Screw geometry: conical for PVC-hard profiles Screw diameter: 63 – 121 mm Screw length: 1300 mm Screw speed: max. approx. 32 1/min. Nominal torque of the gearbox: 1000 daNm Dynamic load rating of the return pressure bearing: 103600 daN Engine power: 43.0 kW, Drive motor: Baumüller DC motor Cylinder heating/cooling zones: 4/3 (air cooling with fan) Adapter heating zones: 1 Tool Heating Zones: 5 Temperature control: digital temperature controller (2 x PSG Multipact 88) Max. permissible mass pressure: 500 bar Output capacity: approx. 150 - 200 kg/h for PVC-rigid profiles Accessories: Dosing device and material hopper Extrusion height: 1150 mm Dimensions: 4250 x 1200 x 1750 mm without hopper (LxWxH) Weight: approx. 3000 k ...

A complete extrusion line with a Reifenhäuser extruder and a gravimetric system Plast-Control (2006) is available. 1) Unwinder 1. 2) Primer unit and hotmelt unit for water-based adhesive lamination. 3) Dryer. 4) Unwinder 2. 5) Dolci extruder for extrusion lamination. 6) Unwinder 3. 7) Two printing units with additional dryer. 8) Extruder Reifenhäuser. 9) Rewinder. 10) Guide roller in the basement. 11) Web guiding under unwinder 1 in the basement. 12) 2x resin silos in the basement. This is a complete extrusion line with peripheral equipment. Documentation available. An on-site inspection is possible.

Key data: 35 mm, 25 , 103 U/min

Used extruder 35mm - 25 l/d with 5.6 kW drive 3-zone auger 3 heating/cooling zones on the cylinder + 1 tool zone Mass pressure sensor 500 bar All machine cables designed to be plugged in Control cabinet with main switch, motor controller, mass pressure indicator and 4 pieces of temperature controller Function-tested

5 layer die head, without extruder and cooling ring Manufacturer: Reifenhäuser Year of manufacture: 2018 Nozzles: 350mm diameter Capacity: 420 kg/h Product examples: Collation Shrink: 16%/14%/40%/14%/16% Standard packaging film 16%/16%/36%/16%/16% Laminating films : 14%/22%/28%/22%/14% The following extruders were mounted: 60/60/90/60/60

Frequency-controlled heating laboratory press with force measuring device -Pressure 20 KN / 2 tons -Pressing area 220 220 mm -Maximum pressing force at 220 220 mm: 41 N / cm² -Hot press with moveable lower pressing plate, electric drive with gear reduction, force measurement is carried out by means of strain gauge sensor -Heat output approx. 1 KW -Plate temperature 120 ° C -Dwell time / duration of laminating: 1-10 s -Pneumatic connection 6bar required -Power supply 400 V, 16 A -Sliding table with integrated positioning pins, lower pressing plate, pneumatic drive -Pressing panels with switchable integrated vacuum channel -Electrical control system integrated with PLC control display in the front panel of the machine -Side channel pump to generate the vacuum

This shredder has a large diameter rotor (30 cm) and 12 rotating blades. The motor has an output of 4 kW. This shredder is equipped with a torque increase gear (reducing gear), so it is also suitable for shredding thicker plastic waste. The grid is interchangeable, so the grain size can be changed. Everything works fine, motor, bearings, gearbox, rotor, blade are all fine. It can be used immediately. I have several of them. Other shredders are also for sale. Please see my other ads.

This grinder has 2 fixed knives and 15 rotating blades. The motor power is 2.2 kW. The grid is replaceable, so the grain size can be changed. Everything works perfectly, motor, bearings, rotor, knife are fine. It's ready to use. I have several of them. There are also other document shredders for sale. Please also see my other ads.

This grinder has 1 fixed blade and 3 rotating blades. The motor power is 2.2 kW. The grid is replaceable, so the grain size can be changed. Everything works perfectly, motor, bearings, rotor, knife are fine. It's ready to use. I have several of them. There are also other document shredders for sale. Please also see my other ads.

Guillotine-type mechanical shear for cutting plastic sheet in industrial processes. Brand: Jwell Cutting width: 1440 mm Maximum thickness: up to 6 mm Geared motor: 7.5 hp (5.5 kW) Type: Mechanical Guillotine Applications: - Cutting rigid or flexible plastic sheet - Post-process extrusion - Plate and film production - Preparation for thermoforming