maris 押 出 機 中古 販売のため

Key data: 65

Extruder 2 corrotating spindles: 65 mm Ø, 30L/D, brand: Maris, model: TM-65 V. Shirt and spindle compatible by segments. Degasser, motor: 90 KW DC, with variable speed. Thread head and 2 spare spindles.

Description TWIN SCREW COROTATING EXTRUDER Diameter screws 65 L/D 43 Electric motor 145 kW nr.1 Vent with vacuum pump nr.1 side feeder nr.4 Dosing units Ktron Soder nr.1 Underwater granulator FILTEC UW 25 year 2005 nr.1 Water ring granulator FILTEC GRO250DEP year 2001

Screw Diameter: 58 mm // Throughput: 450 kg/h

Description TWIN SCREW CO-ROTATING EXTRUDER FOR COMPOUND External screws diameter: 58 nr. screw rotations: 600 RPM nr. main motor rotations: 1345 RPM Main motor power: 108 kW Total installed power : 171, 5 kW Maximum torque on the screw shaft (for each screw): 945 Nm L/D ratio : 48 Degassing pump power: 3 kW In air pelettezing head Vibrating sew Used for producing SBS thermoplastic

MARIS TWIN SCREW EXTRUDER, Loading hopper for regrinds, Barrel with 2 x 92 mm screws 40 L/D, co-rotating parallel screws for polyolefines, CEAR d.c.motor, N.2 vacuum degassing pumps, 4-plate semi-automatic screenchanger, hydraulic pack, Average throughput rate around 1 Ton/h, Water ring pelletizer, drying centrifuge, Electrical control panel, The machine is offered as is or checked

MARIS TWIN SCREW EXTRUDER, Barrel with 2 x 92 mm screws 40 L/D, n.2 vacuum degassing pumps, co-rotating parallel screws for polyolefines, complete with 4-plate semi-automatic screenchanger, hydraulic pack, Average throughput rate around 1 Ton/h, Water ring pelletizer, drying centrifuge, electric cabinet, The machine is offered as is or reconditioned

MARIS TWIN SCREW EXTRUDER, Type TM 85 LC 37 L/D, dosing unit for granulated materials, barrel with 2 x 85 mm co-rotating screws 37 L/D, max screw rpm : 152, vacuum degassing pump 4,5 kw drive, Present capacity 450 kg/h depending on materials and feeding rate, 64 kw drive, Constructed in 1992, offered AS IS or reconditioned, installed power - used power in work: about 60-65% : 64, screws diam.: 85 mm. 37 L/D, screws: co-rotating

MARIS TWIN SCREW CO-ROTATING EXTRUDER, suitable for compounds, recently used for SBS (stirene-butadiene-stirene), barrel with 2 x 58 mm screws 48 L/D - 600 rpm, Max Torque 945 Nm, 450 kg/h average throughput rate (depending on materials and feeding rate), n.1 vacuum degassing pump, 3 kw, 108 kw drive 1.345 rpm, Total installed power 171,5 kw, dry pelletizing unit - can be fitted with Water Ring or Strand or Underwater Pelletizer, vibrating screen, constructed in 2017, offered totally recondiktioned, installed power - used power in work: about 60-65% : 171.5, availability: 8 weeks from confirmatiom, options available: pelletizer - bespoke to project, capacity: 450 kg/h, conditions: totally reconditioned, type: 48 L/D 2x58 mm screws Ø

This shredder has a large diameter rotor (30 cm) and 12 rotating blades. The motor has an output of 4 kW. This shredder is equipped with a torque increase gear (reducing gear), so it is also suitable for shredding thicker plastic waste. The grid is interchangeable, so the grain size can be changed. Everything works fine, motor, bearings, gearbox, rotor, blade are all fine. It can be used immediately. I have several of them. Other shredders are also for sale. Please see my other ads.

This grinder has 2 fixed knives and 15 rotating blades. The motor power is 2.2 kW. The grid is replaceable, so the grain size can be changed. Everything works perfectly, motor, bearings, rotor, knife are fine. It's ready to use. I have several of them. There are also other document shredders for sale. Please also see my other ads.

This grinder has 1 fixed blade and 3 rotating blades. The motor power is 2.2 kW. The grid is replaceable, so the grain size can be changed. Everything works perfectly, motor, bearings, rotor, knife are fine. It's ready to use. I have several of them. There are also other document shredders for sale. Please also see my other ads.

Frequency-controlled heating laboratory press with force measuring device -Pressure 20 KN / 2 tons -Pressing area 220 220 mm -Maximum pressing force at 220 220 mm: 41 N / cm² -Hot press with moveable lower pressing plate, electric drive with gear reduction, force measurement is carried out by means of strain gauge sensor -Heat output approx. 1 KW -Plate temperature 120 ° C -Dwell time / duration of laminating: 1-10 s -Pneumatic connection 6bar required -Power supply 400 V, 16 A -Sliding table with integrated positioning pins, lower pressing plate, pneumatic drive -Pressing panels with switchable integrated vacuum channel -Electrical control system integrated with PLC control display in the front panel of the machine -Side channel pump to generate the vacuum

Guillotine-type mechanical shear for cutting plastic sheet in industrial processes. Brand: Jwell Cutting width: 1440 mm Maximum thickness: up to 6 mm Geared motor: 7.5 hp (5.5 kW) Type: Mechanical Guillotine Applications: - Cutting rigid or flexible plastic sheet - Post-process extrusion - Plate and film production - Preparation for thermoforming