gdw 旋盤 中古 販売のため

Key data: 280 mm

Year of construction 2015 Center height: 165 mm Center width: 650 mm Turning diameter over bed: 280 mm Face slide: 180 mm Spindle speed: 30 - 4000 rpm (infinitely variable) Spindle bore: 43 mm Feeds: 0.025 - 0.9 mm/rev Thread pitch: 0.2 - 7 mm Spindle head DIN 55027: Size 5 Bed sledge travel: 610 mm Sledge travel: 165 mm Upper slide travel: 115 mm Inner cone tailstock quill DIN 228: MK3 Quill stroke: 82 mm Dimensions: 1600 x 860 x 1450 mm Weight: 1000 kg Total power requirement: 18kVA Accessories: 3-jaw chuck, Multifix quick-change steel bracket with cassettes, bezel, coolant device, lighting, chip protection

Control Other GDWcomfortline Spindle Passage [mm] 80 Rotary diameter. [mm] 400 Turning length [mm] 1500 Main spindle: Speed 2,000 rpm Power 14.5 kW Torque 720 Nm Gear Stages 3 Spindle Passage 80 mm Workpiece clamping 6-jaw chuck, ø315 mm Tool carrier: Technology Slide with Face and Top Slide Tool holder Multifix Type C Flat travel 315 mm Upper slide path 120 mm Swivel range upper slide +/- 90° Tailstock: Technology Manual tailstock Quill stroke 225 mm Quill ø 90 mm Quill Cone MK5 Equipment/accessories: Chip disposal chip tray Coolant Management KSS Pump Shaft machining steady rest (fixed), ø180-340 mm Tool Holder Div. Gebr. Tool Holder Other accessories for various baking

Control Other GDW Spindle Passage [mm] 43 Rotary diameter. [mm] 300 Turning length [mm] 650 Main spindle: Belt spindle technology Speed 4,500 rpm Power (max.) 7.5 kW Torque (max.) 80 Nm Spindle Passage 43 mm Workpiece clamping 3-jaw chuck, Röhm ZS ø160 mm Tool carrier (X/Z): Technology slide with 4-cavity turret Tool holder ready size 1 Travel in X/Z 170/650 mm Rapid traverse in X/Z 6 m/min Tailstock: Technology Manual tailstock with handwheel Quill stroke 110 mm Quill ø 50 mm Quill Cone MK3 Equipment/accessories: Chip disposal chip tray Coolant Management KSS Pump Tool holder Div. gebr. Parat Holder Further accessories 4-jaw chuck ø160 mm, various used Baking

turning diameter over bed: 600 mm turning diameter over slide rest: 400 mm turning length: 2000 mm hollow: 82 mm turning diameter: 600 mm turning dia. in gap: 800 mm length of gap: 400 mm turning speeds: 2000 U/min 3-jaw chuck: 250 mm steady: 210 mm with live steady: 200 mm Holder Multifix: coolant: The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was cr ...

GDW LZ 350 incl. 3-axis digital display -Tip height 175mm -Circumferential diameter over bed 310mm -Circumferential diameter over face slide 195mm -Tip width 800mm -Spindle passage 43mm -Speed range 45-2000 rpm -Automatic longitudinal/plane feeds -Tailstock / Quill Stroke 110mm -Thread/Metric/Inch etc. -Multifix with inserts -Three-jaw chuck 200mm -Collet device incl. 22 x collets -2x Emergency/Off -Coolant device -Various interchangeable wheels 5 pieces -Drill chuck -Running tip -Swarf back wall -Machine feet -Miscellaneous tools -Documentation Dimensions: LxWxH 1.85x0.9x1.5 meters / Weight 850Kg

turning diameter over bed: mm Turning diameter over slide: mm centre distance: mm Spindle Speed: U/min. weight of the machine ca.: kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

GDW 300 CSYear of manuf. : 2008 Control : Sonstige GDW Turning diam. : 300 mmTurning length : 650 mm____________Description:Mainspindle:Technology:Belt-driven spindleSpeed:4.500 rpmPower (max.):7,5 kWTorque (max.):80 NmBar capacity:43 mmWorkpiececlamping:3-Jaw chuck, Röhm ZS ø160 mmToolcarrier (X/Z):Technology:Slide with 4-station turretTaper:Parat Size 1Verfahrweg in X/Z:170/650 mmRapid travers in X/Z:6 m/minTailstock:Technology:Manual Tailstock with HandwheelStroke:110 mmQuill-ø:50 mmCone:MK3Equipment/Accessory:Chipmanagement:ChiptrayCoolingmanagement :Cooling pumpToolholder:Misc. used Parat holderFurther Accessory:4-Jaw chuck ø160 mm, misc. used Jaws

Mobile milling machine for attachment, e.g. a lathe. As good as new, almost unused condition More data according to photos

Rotary table for lathe chuck PAGUS diameter lathe chuck: max. Ø 200 mm bolt circle lathe chuck: 140 - 180 mm flange: Ø 130 mm table height: 70 mm 360° rotatable base plate: 290 x 220 mm used, tested ! Dimensions: 350 x 300 x 80 mm

Steady Ø 310 mm

Plan - Spiral - Lathe Chuck Diameter 190 mm Centrally adjustable base jaws Individually adjustable top jaws Through-hole 50 mm Bolt circle 176 mm Height 145 mm Weight 14.5 kg

Elma Troyan motor Type: T 100LA 8/4 CB B14F 130-481 380 volt 0,7/1,1 kW 700/1415 rpm

Leroy Somer motor Type: LS80 230/380 volt 1,5 kW 2840 rpm

Steady Ø 145 mm

Steady Ø 195 mm

Steady Ø 65 mm

220/380 volt 2865 rpm 2,2 kW

Freetech motor 0,8/1,1 kW 400 volt 1400/2800 rpm

Type: MI 70 FP F3 30/1 ratio

Carpanelli motor 230/400 volt - 0,25 kW - 1340 rpm 266/460 volt - 0,3 kW - 1600 rpm

AEG motor Type: AM100LS8/4 400V 0,7/1,3 kW 700/1380 rpm

Steady Ø 60 mm

TOS chuck 200 mm

Elprom motor Type: 112M4 B14F165 4 kW 230/400 volt 1420 rpm 30 kg

Efacec universal motors Type: BF5 132M 848 200/230/220/240 volt 2,2/3,3 kW

Type: SW/075T

Aja motor Type: 80/80/4 230 volt 0,8/1,2 kW 1400/2800 rpm

Aja motor Type: 80/80/4 230 volt 0,75/1,17 kW 1400/2800 rpm

Eldrive motor Type: EF 63B 4 1360 rpm

Jinshin motor Type: AEVF - frame: 112M 415 volt 3,7 kW 1430 rpm 40 kg

AEG motor Type: AM80ZCA4/2 230V 0,8/1,2 kW 1425/2800 rpm

Jinshin motor Type: 112M 3,7 kW 220/380V 1430/1720 rpm 45 kg

Leroy Somer Type: LS9013 2,2 kW 220/380V motor 1390/1740 rpm

Elco Cozzi motor Type: CN400 2,2 kW 220/380 volt 1400 rpm

Type: T 132H 4B 220/380V 7,5 kW 1445 rpm

Ansaldo motor Type: A1C 131 1A A000 7,5 kW 2900 rpm 220/380V

Type: C132MB 7,5 kW 380V - 16 amp

Type: T 132 M4 7,5 kW 1460 rpm For Labor 255 lathe

Type: DH 132S 8/4 2,2/3,3 kW 720/1440 rpm For Pinacho lathe SP 90 / 165

Type: AEEEF-PP008 5,5 kW 50 hz - 380V - 12,3 amp 1450 rpm 59 kg

Chucks 4 claw dia:1000 mm

Manufacturer: Mazak Model: Multiplex 620 Year of Manufacture: 1999 Type of Machine : CNC Turning Centre Auto Operation Hours: 75,830 h Machine Weight: 7,900 kg Find more here - / Contact us at -

Manufacturer: Mazak Model: Multiplex 6300Y Year of Manufacture: 2008 Type of Machine : Turning Center Auto Operation Hours: 83,250 h Machine Weight: 12,200 kg Find more here - / Contact us at -

Manufacturer: Mazak Model: Multiplex 6300 Year of Manufacture: 2005 Type of Machine : Turning Center Auto Operation Hours: 76,300 h Machine Weight: 12,000 kg Find more here - / Contact us at -

Lathes accessories, measuring equipment etc., contents of this cabinet page