elmag 旋盤 中古 販売のため

turning diameter over bed: 250 mm turning diameter over slide rest: 145 mm turning length: 550 mm turning speeds: 50 - 2000 U/min centre height: 125 mm spindle bore: 26 mm tailstock quill taper MT: 2 MK connected load frequency: 230 V total power requirement: 0,75 kW weight of the machine ca.: 0,12 t dimensions of the machine ca.: 1,3 x 0,65 x 0,6 m longitudinal feed. 3-jaw chuck 125 mm. 4-way steel holder. chip tray, bulkhead Hardened bed tracks. Emergency stop switch. lining protection Tool box, instruction manual. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 35 mm throat: 320 mm bore stroke: 150 mm spindle taper MT: 4 table-size: 500 x 400 mm spindle turning speed range: 75 - 3.010 U/min feed range - boring: 0,1 / 0,15 / 0,22 / 0,33 mm/U quill stroke: 150 mm voltage: 400 V total power requirement: 1,8 kW weight of the machine ca.: 275 kg dimensions of the machine ca.: 0,70 x 1,00 x 1,95 m threading device: - Serial-No.: 138050673 - Electromagnetic feed - Threading device - Machine vice 150 mm - Two clamping screws 14 mm - 9-piece drill cartridge 14.5 mm - 30 mm, MK 2 / MK 3 - Cutting oil spray The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 32 mm throat: 245 mm bore stroke: 135 mm spindle taper MT: 3 table-size: 410 x 380 mm spindle turning speed range: 10 - 2100 U/min voltage: 400 V total power requirement: 1,1 kW weight of the machine ca.: 210 kg dimensions of the machine ca.: 0,7 x 1,8 x 1,75 m threading device: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 250 mm turning diameter over slide rest: 145 mm turning length: 550 mm center height over bed: 125 mm centre distance: 550 mm bed width: 135 mm spindle bore: 26 mm turning speed range - stepless: 50 - 2.000 U/min power requirement: 750 W 3-jaw-chuck diameter: 125 mm taper in tailstock-quill: MK 2 dia. of quill: 30 mm quill stroke: 70 mm voltage: 230 V weight of the machine ca.: 120 kg dimensions of the machine ca.: 1,25 x 0,60 x 0,50 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 250 mm turning diameter over slide rest: 145 mm turning length: 550 mm turning speeds: 50 - 2000 U/min centre height: 125 mm spindle bore: 26 mm tailstock quill taper MT: 2 MK connected load frequency: 230 V bore capacity in steel: 16 mm throat: 169 mm quill stroke: 50 mm turning speed range - drilling: 50 - 2250 U/min spindle drive: 0,5 kW total power requirement: 0,75 kW weight of the machine ca.: 0,175 t dimensions of the machine ca.: 1,3 x 0,65 x 1,3 m 3-axis LCD digital display system longitudinal feed. 3-jaw chuck 125 mm. 4-way steel holder. chip tray, bulkhead Hardened bed tracks. Emergency stop switch. lining protection Tool box, instruction manual. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 16 mm throat: 150 mm bore stroke: 90 mm turning speeds: 340 - 2200 U/min : 243 x 243 mm total power requirement: 0,5 kW / Volt weight of the machine ca.: 42 Kg dimensions: 400 x 450 x 900 mm Table drill - Digital speed display - Spindle protection - vice - drill replacement - Quick span feed (1 to 16 mm) - Tilt and rotating rider work table. - deep stop - tool set - documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This ELMAG UFM 125GT was manufactured in 2015. It features a universal milling machine with a spindle Morse taper ISO 40, and a table surface of 1,320 x 320 mm. The machine offers a vertical speed range of 45-1,660 f/p and a horizontal speed range of 40-1,300 f/p. Ideal for precise and versatile milling tasks. Contact us for more information about this machine.

Cylindrical grinding machine manufactured in 2022. This ELMAG CG 800 features a maximum grinding diameter of 200 mm and a grinding length of 800 mm. It is equipped with a robust headstock spindle and transverse feed guide, ensuring precision in grinding operations. If you are looking to get high-quality grinding capabilities, consider the ELMAG CG 800 machine we have for sale. Contact us for further details.

Mobile milling machine for attachment, e.g. a lathe. As good as new, almost unused condition More data according to photos

Rotary table for lathe chuck PAGUS diameter lathe chuck: max. Ø 200 mm bolt circle lathe chuck: 140 - 180 mm flange: Ø 130 mm table height: 70 mm 360° rotatable base plate: 290 x 220 mm used, tested ! Dimensions: 350 x 300 x 80 mm

Steady Ø 310 mm

Plan - Spiral - Lathe Chuck Diameter 190 mm Centrally adjustable base jaws Individually adjustable top jaws Through-hole 50 mm Bolt circle 176 mm Height 145 mm Weight 14.5 kg

Elma Troyan motor Type: T 100LA 8/4 CB B14F 130-481 380 volt 0,7/1,1 kW 700/1415 rpm

Steady Ø 145 mm

Steady Ø 195 mm

Steady Ø 65 mm

Leroy Somer motor Type: LS80 230/380 volt 1,5 kW 2840 rpm

220/380 volt 2865 rpm 2,2 kW

Freetech motor 0,8/1,1 kW 400 volt 1400/2800 rpm

Type: MI 70 FP F3 30/1 ratio

Carpanelli motor 230/400 volt - 0,25 kW - 1340 rpm 266/460 volt - 0,3 kW - 1600 rpm

Steady Ø 60 mm

TOS chuck 200 mm

AEG motor Type: AM100LS8/4 400V 0,7/1,3 kW 700/1380 rpm

Elprom motor Type: 112M4 B14F165 4 kW 230/400 volt 1420 rpm 30 kg

Efacec universal motors Type: BF5 132M 848 200/230/220/240 volt 2,2/3,3 kW

Type: SW/075T

Aja motor Type: 80/80/4 230 volt 0,8/1,2 kW 1400/2800 rpm

Aja motor Type: 80/80/4 230 volt 0,75/1,17 kW 1400/2800 rpm

Eldrive motor Type: EF 63B 4 1360 rpm

Jinshin motor Type: AEVF - frame: 112M 415 volt 3,7 kW 1430 rpm 40 kg

AEG motor Type: AM80ZCA4/2 230V 0,8/1,2 kW 1425/2800 rpm

Jinshin motor Type: 112M 3,7 kW 220/380V 1430/1720 rpm 45 kg

Leroy Somer Type: LS9013 2,2 kW 220/380V motor 1390/1740 rpm

Elco Cozzi motor Type: CN400 2,2 kW 220/380 volt 1400 rpm

Type: T 132H 4B 220/380V 7,5 kW 1445 rpm

Ansaldo motor Type: A1C 131 1A A000 7,5 kW 2900 rpm 220/380V

Type: C132MB 7,5 kW 380V - 16 amp

Type: T 132 M4 7,5 kW 1460 rpm For Labor 255 lathe

Type: DH 132S 8/4 2,2/3,3 kW 720/1440 rpm For Pinacho lathe SP 90 / 165

Type: AEEEF-PP008 5,5 kW 50 hz - 380V - 12,3 amp 1450 rpm 59 kg

Chucks 4 claw dia:1000 mm