costa のこぎり 中古 販売のため

For sale is an entire fully CNC-controlled planing mill. The planing mill can be visited during operation. A visit training is possible when buying before dismantling. The system has been in reliable operation since 1981 and has always been professionally maintained. Equipment: 1. Stacking Task 2. Rupa vacuum lifter - Age: approx. 1.5 years 3. Cross Conveyor 4. Canali Cut-off Band Saw - 2 band saws 5. Longitudinal/transverse conveyor incl. roller conveyors 6 Costa planing machine with 10 spindles - Fully CNC controlled Spindle configuration: 1 spindle horizontal 2 Lifting spindle right vertical 3 Lifting spindle left vertical 4 Lifting spindle horizontal 5 Lifting spindle right vertical 6 Lifting spindle left vertical 7 Lifting spindle top horizontal 8 Lifting spindle bottom horizontal 9 Lifting spindle at the bottom horizont ...

SPECIFICATIONS: Grinding/calibration line Editing: from above and below 2 motors with 18.5 KW each Cardan drive Sanding belt dimensions mm: 2,620 x 1,180 Vacuum carpet

SECOND-HAND WIDE BELT SANDER COSTA MOD. 60 CC/2 1150 - CE RULES - Working width 1150 -Volt. 380/50 - S/N 951121/DR3 - Year 1996

SPECIFICATIONS: Sanding belt size: 1380 x 2620 mm Max. working height: 160 mm Diameter of the rollers: 250 mm 3 independent motors total KW 36.0 Electronic Band Oscillation Front and rear support rollers Speed variator Pneumatic Shoes Hardness of the rubber rollers Reel I: 90 sh Reel II: 75 sh III Reel: 55 sh

SPECIFICATIONS: Processing width: max. 1400 mm 2 adjustable speeds Motor 1: 30 kW Motor 2: 22 kW COMPOSITION: Group I: Steel roller Ø 400 mm Group II: 2 steel rollers of Ø 130 mm each

Multi-Blade Saw Costa Leopard S Year: 1981 Cutting height 220mm 2x75hp new conveyor belt, replaced in 2015 Width chain: 370mm Cross conveyor 5 strands

Manufacturer: Costa, Type: Strettoio, Year: 1999, Work piece width min-max mm: 180, Min.-max. workpiece length in mm: 2200, Stages: 5, Year :1999

Manufacturer: Costa, Type: SbF , Year: 1999, Sanding width mm: 1350, Sanding hight mm: 3-150, Number of sanding belts: 1, Rubber roller: yes, Band 1 Leistung kW : 15, Transportbandantrieb kW: 1,1, Brushing unit: yes, Year :1999

Satin sander COSTA LEVIGATRICI model S A2 TS 1350 : – with electronic PCM control and touch-screen video – useful working width 1350mm – useful working thickness from 3 to 160mm – variable feed speed from 5 to 25 m/min – with perforated belt and depressor – n° 1 belt unit with pad, 2620mm belt development, with air blowers belt cleaning – n° 1 scotch-brite group (inside the machine) Year 2000, CE regulations

Manufacturer: Costa, Type: KA CCC 1350, Year: 2003, Control: Costa, Sanding width mm: 1350, Sanding hight mm: 160, Number of sanding belts: 3, Sanding belt dimensions: 1350 X 2620, Rollers: 3, Längsschleifaggregate: 3, Bürstenaggregate: 1, Steel roller: 2+1 Gummi, Bürstenaggregate: 1, Band 1 Leistung kW : ca.20, Band 2 Leistung kW : ca.20, Band 3 Leistung kW : ca.20, Continous adjustable feeding speed m/min: 5-15, Transportbandantrieb kW: 2,2, Constant table hight: yes, Brushing unit: yes, Year :2003

Manufacturer: Costa Inert Trocknung, Type: C X C 1350, Year: 2011, Work piece width min-max mm: 50-1350, Min.-max. workpiece height in mm: 3-120, Working widht max mm: 1300, Number of lamps: 1, kW power 1 lamp: 10, Gesamtlänge UV Modul mm: 1300, Lamps straight installation: yes, Adjustable: yes, Elektronische Leistungregelung: yes, Position of lamps: gerade, Power per lamp watt UV: 60-120, Feeding speed m/min: 5-20, Conveyor: Band, Exhaust air diameter mm: yes, Feedin speed m/min: 6-25, Belt conveyor: yes, Year :2011

Manufacturer: Costa, Year: 1999, Foil stations: yes, Shrinking tunnel mm: 1700, Year :1999

Manufacturer: Costa, Type: Lince, Year: 1999, Cutting widht mm: 300, Power engine kW: 58, Year :1999

Manufacturer: Costa, Type: Nastro, Year: 1999, Length mm: 2300, Working widht mm: 400, Drive power kW: 0,3, Year :1999

Manufacturer: Costa Breitbandschleifmaschine, Type: CCT/1350, Year: 1995, Monting of the machine: Stahlwalze/Gummiwalze/Schuh, Sanding width mm: 1350, Sanding hight mm: 150, Number of sanding belts: 3, Sanding belt dimensions: 2620 X 1350, Steel roller: yes, Band 1 Leistung kW : ca.30, Band 2 Leistung kW : ca.30, Band 3 Leistung kW : 17, Continous adjustable feeding speed m/min: 10-25, Transportbandantrieb kW: ca.3, Constant table hight: yes, Vacuum table: yes, Brushing unit: yes, Weight in kg: ca.8000, Year :1995

Manufacturer: Costa, Type: T 1350, Year: 1998, Monting of the machine: schuh/Bürste, Sanding width mm: 1300, Sanding hight mm: 150, Number of sanding belts: 1, Sanding belt dimensions: 3250 X 1350, Längsschleifaggregate: ca.17, Bürstenaggregate: yes, Band 2 Kombiaggregat Walze/Schuh: 10-20, Belt 4 pressure segment belt: yes, Belt 4 synchronous and reverse run: 32, Elektronische Tastung mm: yes, Table hight adjustment by engine: ca.1,5, Transportbandantrieb kW: yes, Abrasive belts at bottom: yes, Intermediate sanding of lacquer: yes, Programmanwahl extern: yes, Year :1998

Manufacturer: Costa Giardina Tomanin, Type: Hochglanzlackierstrasse, Finished product: Hochglanz und Glaslackierung, Work piece width min-max mm: 150-1300, Min.-max. workpiece height in mm: 3-80, Min.-max. workpiece length in mm: 150-2800, Feeding speed min-max m/min: ca.10, Inlet conveyor: yes, 2 paint roller: 2 Stück Tomanin Lackwalze, 2 UV dryer lamps/Watt: 1 Lampen Giardina 80 Watt, 3 UV dryer lamps/Watt: 2 Lampen UV<CRLF>Giardina 80-120 Watt, Sanding machine: Costa Lackschleifmaschine Quer/längs, Available: sofort,

Manufacturer: Costa Lackschleifmaschine, Type: C 1350, Year: 1999, Control: Costa, Sanding width mm: 1300, Sanding hight mm: 120, Number of sanding belts: 1, Sanding belt dimensions: 2620 X 1350, Rubber roller: yes, Shore roller 1: 40, Band 1 Leistung kW : 36, Band 1 Schleifbandgeschwindigkeit m/s : ca.5-20, Intermediate sanding of lacquer: yes, Constant table hight: yes, Vacuum table: yes, Noise enclosure: yes, Workpiece emitting device nozzles: yes, Year :1999

Key data: 1350 mm, 2 st.

CALIBRATING SANDING machine with 2 belts (2 independent motors) model COSTA series SK 5 CC 1350 second-hand machine working conditions Excellent , machine as new machine with inverter on the belts and on the carpet fixed table, moving head machine with CE regulation: YES instruction booklet, CE declaration of conformity: YES for wood, furniture, custom-made furniture, wooden frames, doors, panels, composite materials, plastics and various technical data : max. working width mm. 1350 max working height mm. 160 min working height mm. 4 dimensions of abrasive belts mm.1380 x 2620 advancement speed belt , with inverter , from 3 to 15 m/min (motor power Kw 1.1) automatic centering perforated carpet (there is no vacuum group) composition (2 belts, 2 independent motors) : 1st unit : rubber calibrating roller - diameter mm 200 - shore 85 - motor power Hp 10. with inverter  ...

Manufacturer: Costa, Type: SbF, Year: 1999, Control: Costa, Sanding width mm: 1350, Sanding hight mm: 3-150, Number of sanding belts: 1, Sanding belt dimensions: 2620 X 1350, Table hight adjustment by engine: yes, Rollers: 1, Rubber roller: yes, Shore roller 1: ca.35, Längsschleifaggregate: 11, Belt 1 shoe unit: regelbar, Band 4 Schleifbandgeschwindigkeit m/s : yes, Table hight adjustment by engine: yes, Elektronische Tastung mm: 5-25, Separation of sampling in mm: 0,25, Continous adjustable feeding speed m/min: yes, Abrasive belts at bottom: yes, Intermediate sanding of lacquer: yes, Constant table hight: yes, Year :1999

Manufacturer: Costa, Type: CCC + CCC 1150, Year: 1998, Monting of the machine: obenWalze/Walze/Walze , Equipment of machine 2: untenWalze/Walze/Walze, Double sided sanding line: yes, Sanding width mm: 1150, Sanding hight mm: 120, Number of sanding belts: 6, Sanding belt dimensions: 2620 X 1150, Table hight adjustment by engine: yes, Rubber roller: 3 +3, Shore roller 1: 70, Shore roller 2: 70, Walze 3 Shorehärte : 60, Längsschleifaggregate: ca.34, Belt 2 shoe unit: ca.22, Belt 2 synchronous and reverse run: ca.17, Belt 3 synchronous and reverse run: 34/22/17, Table hight adjustment by engine: yes, Combi unit roller/shoe: 8-20, Table hight adjustment by engine: ca 3 + 3, Abrasive belts at bottom: yes, Intermediate sanding of lacquer: yes, Programmanwahl extern: yes, Pressure pads for short workpieces: 150, Year :1998

Manufacturer: Costa Kalibrieranlage, Type: KA CC 1350, Year: 2007, Control: Siemens/KEB, Monting of the machine: 2x Stahlwalze geriffelt, Sanding width mm: 1350, Sanding hight mm: 120, Number of sanding belts: 2, Sanding belt dimensions: 2620 X 1380, Table hight adjustment by engine: yes, Steel roller: 2, Längsschleifaggregate: 30, Belt 2 shoe unit: 22, Band 2 Schrägstellbar Grad : no, Band 2 Innenliegendes Drucklamellenband : nur Gegenlauf, Table hight adjustment by engine: yes, Elektronische Tastung mm: 8-20, Separation of sampling in mm: 2,2, Table hight adjustment by engine: variabel, Continous adjustable feeding speed m/min: yes, Constant table hight: no, Brushing unit: yes, Werkstück-Abstrahleinrichtung: 3400, Diameter/ brush bristles: yes, wast cleaning: Pneumatische Absaugvorrichtung dabei, Oszilation dabei, Year :2007

Hersteller : Costa, Type: Optima 2000 CNC, Year: 1993, Control: CNI, Positioning of CNC axis: yes, Double edge bander: yes, Hand-over: yes, Longitudinal edge banding: yes, Sanding machine: no, Tool exchange places: yes, Working width min-max mm: 320-4000, Arbeitshöhe min-max mm: 30-100, Saw Units: 1, Double edge bander - milling units/side total: 1, Spindle length of double edge bander mm: 620, Double edge bander with stoppers: yes, Longitudinal milling units total: 5, Längsprofiler Fräsaggregate linke Seite: 2, Längsprofiler Fräsaggregate rechte Seite: 2, Längsprofiler Fräsaggregate linke Seite: 2, Longitudinal milling units horizontally: 1, Spindle length - longitudinal milling mm: 320, Spindle diameter - longitudinal milling mm: 50, Feeding speed min-max m/min: 2,5-23, Vorschub stufenlos: yes, inkl Werkzeuge, Year :1993

Various old sawmill machines are available. 1) Double shaft saw Costa Leonard, max. cutting height: 200mm, max. cutting width: 350mm, weight: approx. 5000kg. 2) Step feeder Esterer WD, max. log length: 6000mm. 3) Frame saw Esterer HD 30, frame opening: 710mm, stroke: 600mm. Including accessories. 4) Multi blade saw Costa Multiprisma 35, max. log length: 6000mm. 5) Drum chipper Zeno, drive power: 55kW. 6) Board stacking machine Zimac, working length range: 800mm-3000mm. 7) Steel chimney stack Schicks, height: approx. 50m, diameter: approx. 1400mm. Documentation available. An on site inspection is possible. Individual sale possible by arrangement.

Machine to the dowel, drill and saw the company EKM spezialmaschinen connection value: 4,4 kW 1 pneum. Workpiece clamping system 1 drill head with 5 spindles in row spacing 25 mm / 40 mm / 40 mm / 25 mm 4 piece glue - and plugs Tools 4 piece adjustable on width 220 mm Under table saw Control PLC Siemens Simatic Fully functional replacement for PLC program on CD,. Shipping dimensions: L 1500 mm x W 1500 mm x H 2400 mm Machine weight: 1000 kg Condition good, fully functional

C.T.S. Gemini 8002 with simens Simatic and bar feeder The C.T.S. Gemini 802 is an industrial machine designed for precision cutting and processing of materials such as metal or plastic. Manufactured by C.T.S. (Cutting Technology Systems), the Gemini 802 model is known for its efficiency and accuracy in various industrial applications. Key Features: - Cutting Capacity: The Gemini 802 is equipped to handle a range of material sizes, providing versatility in cutting operations. - Automation: Incorporates automated features to enhance productivity and reduce manual intervention. - Precision: Designed to deliver high-precision cuts, ensuring minimal material waste and adherence to specified dimensions. Find more here - / Contact us at -

Manufacturer: Koch, Type: SBD - 320 , Year: 1994, Control: Programm, Working widht max mm: 1500, Arbeitstiefe max mm: 320, Working thickness max mm: 10 - 32, Saw diameter mm: 350, Work piece transport: Kette, Drilling support horizontal: 2, Drill gearings: 7, Drill gearings: 7, Drill support from top: 5, Drill gearings: 7, Belt conveyor: yes, Gluing: yes, Re-charging: no, Dovel insertion: yes, Raster 32 mm: yes, Horizontal drilling from both sides: yes, Wight approx. kg: 6000, Year :1994

Manufacturer: Koch, Type: Compact, Year: 1991, Control: Programm, Working widht max mm: 150-2500, Arbeitstiefe max mm: 200, Working thickness max mm: 80, Schwenkbereich Grad in X: +30-90, Dovel units: 3, Dovel diameter mm: 10-12, Drill gearings: 2, Drill gearings: 2, Drill gearings: 2, Drill spindles per support: 5, Gluing: yes, Dovel insertion: yes, Raster 32 mm: yes, Compressed air bar: 6, Wight approx. kg: 3000, Year :1991

I.T.E.C GmbH Cold circular saw Find more here - / Contact us at -

Manufacturer: FORMAT-4 Model: Kappa V60 Type of Machine : vertical panel saw Condition: Used. In operation for approx. 6 months Max cutting length: 4200 mm Max cutting height: 2200 mm Max horizontal cut height: 2080 mm Max cutting depth: 60 mm Motor power: 4 kW Saw blade diameter: 250 mm Speed: 5300 rpm Weight: 910 kg Installation dimensions (LxWxH): 5600 x 1700 x 3000 mm Find more here - / Contact us at -