cincinnati milacron 押 出 機 中古 販売のため

CINCINNATI-MILACRON TWIN SCREW EXTRUDER, for PVC profiles, extruder with 2 x 45 mm conical screws, average production 100 kg/h, 14 kw drive, for profiles with max width 250 mm., calibration desk with 2 pumps x 5 kw, caterpillar pull off unit, contact length 1500 mm, width250 mm., planetary saw, collection table, installed power - used power in work: about 60-65% : 14, capacity: 100 kg/h ca, screws: 45 mm. conical

Brand Cincinnati Milacron Austria GmbH Type CMT 35 Machine number 2005723/10 Type Screw Conical Double Screw Year of manufacturing 1993 Ble Ud Dvyovl Hzgocop Machine hours 104.599 hours Screw Diameter 35 mm Dimensions (LxWxH) 3200 x 1500 x 1720 mm Weight (approx) 2000 kG

Brand: Cincinnati Milacron Austria GmbH Type: PHPO 40 Year of manufacturing: 1999 Weight: 6.200 kg

FERROMATIK MILACRON ELEKTRA 155 injection moulding machine manufactured in 2003 in Germany after a general overhaul at a total value of approximately 14290 EUR. During the 2024 overhaul, components such as the clamping system drive screw, belt pulley, drive belt, lubrication system sensor, clamping pins, pan and drive belts in the plasticising unit were replaced. In addition, both motors in the plastification unit were refurbished and a periodic column tension check was carried out with the GEFRAN strain gauge system. The FERROMATIK MILACRON EE155 injection moulding machine is the perfect choice for the mass production of plastic parts of different colours, shapes and sizes by injection moulding. The machine’s high-performance components significantly enhance any, even the most intensive, machining process. These include an electric drive, which, compared to a hydraulic drive, offer ...

FERROMATIK MILACRON K-TEC 450 injection moulding machine was built in 2007 in Germany by Ferromatik Milacron GmbH. This multifunctional, technically advanced machine is used for the mass production of plastic parts of different colours, shapes and sizes. The machining process involves reliable components with excellent parameters, including among others a precision mould clamping system that operates with a force of up to 450 tonnes. In turn, the parts produced by injection moulding are distinguished by their high repeatability, durability and precision. The K-TEC 450 injection moulding machine weighs 30200 kg. Technical specifications of the FERROMATIK MILACRON K-TEC 450 injection moulding machine - maximum clamping force: 450 t (4500 kN) - EE1 screw diameter: 80 mm - EE2 screw diameter: 30 mm - screw length/diameter ratio: 20 L/D - maximum injection pressure: 292 bar - maximum ...

accuhead machine for containers up to 40 ltr. Extruder 90/24D. accuhead 6 ltr. Clamping force 350 kN. Cables partially renewed. Oil tank and pipes cleaned. New control system is prepared (B&R) and can be installed at short notice

Key data: 1100 kN, 201 g/PS, 40 mm

Machine in good condition, dry, clean, ready for production. The pump is quiet and the injection molding is precise. Everything works perfectly. With 2 core pulls and robot connection, with quality control program. - Immediately available in our warehouse in Budapest, loaded onto the customer's truck free of charge or delivered to the customer's home for a refund of freight costs. - Function-tested (functional guarantee) - The machine can also be checked when it is switched on Information about the machines we offer and our company: - We only sell machines that we own and can be purchased from our warehouse in Budapest. - We inspect and test each offered machine before delivery - we do NOT sell non-functional goods - we are NOT a third-party intermediary. - All machines offered come from successful companies for which maintenance and care are a matter of course - all offered mac ...

Brand Ferromatik Milacron GmbH Type eQ-280 - 2290 Bj Ud Dvsw Ebpweycjlp Year of manufacturing 2023 Machine hours 50 hours Clamping Force 2.800 kN Screw ø 60 Mm Injection Pressure 2.238 bar Shotvolume max. 905 cm3 Max. distance between holms 710 x 660 mm Min. mould height 250 mm Distance between plates max. 1.400 mm Dimensions (LxWxH) 8.500 x 2.100 x 2.500 mm Weight 18.400 kG

Ref. no.: 18587 Hersteller: FERROMATIK MILACRON Year of construction: 2001 Clamping unit Clamping force: 200 ton Opening stroke: 750 mm Distance between tie bars: 560 x 560 mm Mould height min.: 300 mm Opening width: 1050 mm Platen size (h x v): 830 x 830 mm Injection unit Screw diameter: 50 mm Injection volume: 416 cm³ Shot weight: 375 g Measurements and weight Dimensions: 6,9 x 2,0 x 2,6 m Machine weight: 13000 kg

Key data: 1100 kN

Ferromatik Milacron K110D-S/2F / 2K Injection Molding Machine Year of Make: 1998 Injection unit: Screw diameter: 30 mm Injection weight: approx. 85 g Spray pressure: 2298 bar Dosing volume: 99 ccm Clamping unit: Clamping force: 110 t Spar spacing: 470x470 mm Size of the clamping plates: 740x740 mm Ejector: hydraulic Clamping unit: hydraulic Control: Ferromatik Milacron Additional equipment: 2-Component Injection Molding Machine Euromap 67 Robot interface Hydraulic core pull x 4 Control with hot runners Injection unit is wear-resistant and resistant to corrosion Screw diameter in vertical injection unit: ⌀25 mm - approx. 43 g/hp The machine was regularly serviced Recently, the service center replaced the cylinder of the machine with worm and the hydraulic valves with new ones Dimensions: Weight: 6300 kg Length/Width/Height: 5.00x1.60x3.60 m All offer ...

This Milacron Elektron Evo 350 was manufactured in 2017. A robust electrical injection moulding machine featuring a screw diameter of 70 mm, closing force of 350 T, and a shot weight of 1172 g. It supports mold sizes between 249 – 800 mm and has minimal usage with only 235 testing hours. Contact us for more information about this machine.

Key data: 1500 kN

Ferromatics Milacron Magna T(MTs) 150-450 / Production line with the Wemo 6-5 xDesign robot, Wemo WCS-R conveyor belt and contactor housing / Machine in very good technical condition Year of Make: 2017 Injection unit: Screw diameter: 45 mm Injection weight: 215 g Spray pressure: 1984 bar Dosing volume: 226 ccm Clamping unit : Clamping force: 150 t Tiebar spacing: 510x510 mm Size of the clamping plates: 740x740 mm Ejector: hydraulic Clamping unit: toggle lever Control: B&R - Touchscreen Additional equipment: Hybrid machine: high-speed, energy-saving and very quiet Operating hours: 11,000 in automatic mode Euromap 67 Robot interface Air Valve x 1 Hydraulic core pull x 1 Hot runner controller x 36 (for additional payment) Injection unit is wear-resistant and resistant to corrosion Main motor of the machine – servo motor driven by inverter Central lubricatio ...

This Milacron ELEKTRON 75 was manufactured in 2011. It features a screw diameter of 18 to 32 mm and a clamp force of 750 kN. The machine dimensions are 4.36 × 1.42 × 1.95 m, and it weighs 4700 kg. If you are looking to get high-quality injection moulding capabilities, consider the Milacron ELEKTRON 75 machine we have for sale. Contact us for more information about this machine.

Key data: 3500 kN

Ferromatics Milacron K-TEC 350-2650 / Production line with the Sepro robot Year of Make: 2017 Injection unit: Screw diameter: 70 mm Injection weight: 1104 g Spray pressure: 2175 bar Dosing volume: 1213 ccm Clamping unit: Clamping force: 350 t Handlebar spacing: 750x750 mm Size of the clamping plates: 1110x1165 mm Ejector: hydraulic Clamping unit: hydraulic Control: MOSAIC - Touch Screen Additional equipment: Very good technical condition High-speed machine Operating hours: approx. 10,000 h in automatic mode Euromap 67 Robot interface Air Valve x 5 Hydraulic core pull x 3 Control with hot runners Hardened injection unit - Bimetal Proportional valve on the injection unit – precise injection Parallel movements Machine with cylinder / battery with compressed nitrogen (extra charge for fast working) Energy-efficient machine – has a system with 3 hydrauli ...

Used HDPE Extrusion Blow Molding Machine for 10 L – 300 bph – Overview Second-hand Uniloy Milacron HSM10/D extrusion blow molding machine designed for producing up to 10 L HDPE containers. With a single-parison head and robust clamp, this EBM unit is ideal for industrial packaging and beverage production auxiliaries (e.g., water canisters, edible oils) and can be integrated within a used bottling line. Documentation and manuals are available. Reference number: SO126. Technical Specifications & Performance Data Main data Make/Model: Uniloy Milacron HSM10/D Year: 2000 Technology: Extrusion Blow Molding (EBM), single parison Material: HDPE Number of cavities: 1 Max container volume: 10 L Indicative output: up to about 300 bph on 10 L (application-dependent) Manuals: included Ref. no.: SO126 Extruder Screw diameter: 100 mm; L/D 24 HDPE screw speed: 0–70 rpm Plasticizing capac ...

Saw for Pipe Cincinnati RS 25 PZ S 1992 year 4000 Euro

Material: PVC // Details: DC motor 27 kW, degassing, counter-runner, capacity approx. 150 - 200 KG/hr.

Used Cincinnati conical twin-screw extruder model CMT 35. 2 pieces available: 1 pc. - new 1989 1 pc. - new 1990 Technical data: - drive: DC 9kW motor - heating zones: cylinder - 3, head - 3 - cylinder cooling - oil - vacuum degassing pump

Key data: 45 mm, 1350 , 298 U/min

Single Screw Extruder Cincinnati Talos 45-30 G Year of construction 2009 + Corrugator Maintools MTC 60/90 Year of construction 2006 Both machines are in good condition, and immediately available

Description Conical Twin Screw Extruder Screws Diameter 45 - 97 Screws Length 390 Barrel zones 3 Nr.1 vent Thermoregulated screws Motor power 15,4 kW Forced feed

Description Conical Twin Screw Extruder screw diameter 80 Thermoregulated screws 1 vent Installe dnew lectrocal motor in 2018 Unstalled new inverter for electrical motor in 2018 Motor power 68 kW Retrofit of PLC with BCtouch control

Description Complete line for WPC profiles Twinl screw extruder, screw and barrel in tungsten crbide model Cincinnati ARGOS 135 doble vented year 2008 Forced feeder L/D 37 Gravimetric dosing sistem CONPRO 5 components Working hours 40.742 Double strand calibration table GREINER get.CAL 20,3 - 6p/8z - Dual A year 2008 Double strand haul-off/saw GREINER Cob. get.COM 30/9-235-S/500 - DS year 2008 Tipping table GREINER GTT 6,00 anno 2008 Avalable spare screw and barrel

CINCINNATI CMT 80, twin screw extruder, n.2 conical screws diam 80 mm., thermoregulated barrel, vacuum degassing unit, 68 kw drive, installed power Kw: 68

Description Complete multilayer Pex-Al-Pex pipes production line Main extruder Cincinnati Proton 45-30G Co-extruder Cincinnati CE-30 Cooling tank Cincinnati Sprayon 63T/5,8/3k Vacuum tank Cincinnati Vacon 63T/5,8/3k Haul-off Cincinnati Tracton 63/1C-6 Aluminum welder Leicht WIG-120 Aluminum unwinder AMT AH1,0/1700 Chiller HYFRA VWK30-1-S Aluminum pipe welder AIXCON PWU 400 Stockpile for raw aluminum, forming aluminum pipe, welding aluminum pipe UNIWEMA 30 KMW Generator for welder Huttinger BIG 40/100 Coating extrduer Cincinnati Proton 45-30G Glue co-extruder Cincinnati CE-30 Cooling tank Sider Jack Cooling tank Cincinnati Sprayon 63T/5,8/3k Haul-off Cincinnati RAE 63/1 X1 Marking machine IMAJE 9040 X ray gauge x SCITEQ X-ACT TWINEYE 40 Automatic winder FB Balzanelli TR1350 L1/8/M

CINCINNATI CMT 35 APC, twin conical screw extruder, 2x35 mm screws, Control panel, 7,1 kw drive, 57.000 working hours, installed power - used power in work: about 60-65% : 7,1, type: PVC

Cincinnati Titan92-APC Tapered Twin Screw Extruder Year of Make: 1996 incl. volumetric dosing unit for masterbatch Wittmann Dosimax Manual screen changer BD Plast Installed between extruder adapter and pelletizing head Alternatively available: Gneuss Screen Changer Granulating head Cincinnati GK120 works in the hot knock-off method including adapter and funnel Circular vibrating screen IFE US 400 x 1000 FV – LM445T Year of manufacture: 2018 for the separation of particles that are not bound in the granules with particle size < 1.8 mm Vertical granule cooler Knorr GK-600-PVC Year of manufacture: 2018 Cooling volume: approx. 190 litres Mounted on a walk-on steel platform incl. cyclone separator, complete supply and outlet pipes and blower Big-Bag Filling Station incl. material transport and material weighing SBB weighing technology Condition: fully functio ...

CINCINNATI PROTON 45-30G Attention: Machine in left-hand version Screw diameter: 45 mm, L/D = 30 Grooved catchment zone Motor (DC drive): 65 kW Screw speed: max. 320 rpm Tool zones: 4+1 for adapters Melt pressure & temperature sensor included EXcPRO-NT control incl. CAN bus for data communication Air conditioner for control cabinet Cylinder in bimetal design – condition: very good Screw with few operating hours – condition: very good Without material funnel & without adapter

Maximum Diameter: 110 mm // Minimum Diameter: 32 mm

Deze extruder van Cincinnati staat bij Plastima Used Machinery in de machineopslag. De machine komt uit 1999. Speciale opmerking: de extruder mist de versnellingsbak. Bj Usq Tr T Rod Dvycjlp – Merk: Cincinnati – Model: Titan 45R-APC – Bouwjaar: 1998 – Conische dubbele schroef extruder – Schroef Ø: 45 mm – Werkuren: 64.082

Screw Diameter: 50 mm // Throughput: 150 kg/h

Reduction and transfer case for conical twin screw extruder Cincinnati Titan 58 Manufacturer: Eisenbeiss on behalf of Cincinnati Extrusiontechnik General overhaul included: • Checking the sprockets for damage with a special camera • New sealing of the drive and output shaft • New shaft bearing • New oil filling • Repainting Condition: overhauled, fully functional

Key data: 75 mm, 30

Single Screw Extruder Cincinnati TALOS 75-30G Output capacity: max. 450 kg/h (depending on material and processing conditions) Screw diameter: 75 mm, L/D = 30 Screw geometry for processing HDPE/PP 11 x Tool Zones incl. TC Type J ITIB 3-pin Thermal Probe incl. mass temperature and pressure sensor Interface for succession via CAN Open Bus Machine control Cincinnati EXcXP-touch Drive power main motor: 125 kW Total connected load: 178 kW Machine weight: 2,200 kg Remark: incl. spare engine (used) without material hopper Condition: used, function tested

Key data: 72 mm, 28 , 50 U/min

Parallel twin screw extruder Cincinnati ARGOS 72R-28D Output capacity: max. 400 kg/h (depending on material and processing conditions) Power main drive: 47 kW (AC motor) Screw diameter: 72 mm, L/D = 28 Screw speed: max. 50 rpm Screw geometry for u-PVC pipe or technical profiles Original screws and barrels in very good condition 12 x Tool heating zones 3-ph/5-pin CEE 32A/10.5 kW 1 x adapter heating zone 1-ph/5-pin CEE 32A/5.5 kW 13 x TC Type J 16 mm Tuchel C70B 3-pin 4 m Incl. mass pressure and temperature sensor Successor interface: Interface 1 (analogue) and Can Open Bus 3 x Add on Plasticolor 0–10V Machine control Cincinnati EXc ProXP Horizontal conveyor incl. material hopper Total connected load: 184 kW Dimensions (L x W x H): 4,018 x 1,250 x 2,463 mm Weight: 4,700 kg Condition: used, overhauled & functionally tested

Frequency-controlled heating laboratory press with force measuring device -Pressure 20 KN / 2 tons -Pressing area 220 220 mm -Maximum pressing force at 220 220 mm: 41 N / cm² -Hot press with moveable lower pressing plate, electric drive with gear reduction, force measurement is carried out by means of strain gauge sensor -Heat output approx. 1 KW -Plate temperature 120 ° C -Dwell time / duration of laminating: 1-10 s -Pneumatic connection 6bar required -Power supply 400 V, 16 A -Sliding table with integrated positioning pins, lower pressing plate, pneumatic drive -Pressing panels with switchable integrated vacuum channel -Electrical control system integrated with PLC control display in the front panel of the machine -Side channel pump to generate the vacuum

This shredder has a large diameter rotor (30 cm) and 12 rotating blades. The motor has an output of 4 kW. This shredder is equipped with a torque increase gear (reducing gear), so it is also suitable for shredding thicker plastic waste. The grid is interchangeable, so the grain size can be changed. Everything works fine, motor, bearings, gearbox, rotor, blade are all fine. It can be used immediately. I have several of them. Other shredders are also for sale. Please see my other ads.

This grinder has 2 fixed knives and 15 rotating blades. The motor power is 2.2 kW. The grid is replaceable, so the grain size can be changed. Everything works perfectly, motor, bearings, rotor, knife are fine. It's ready to use. I have several of them. There are also other document shredders for sale. Please also see my other ads.

This grinder has 1 fixed blade and 3 rotating blades. The motor power is 2.2 kW. The grid is replaceable, so the grain size can be changed. Everything works perfectly, motor, bearings, rotor, knife are fine. It's ready to use. I have several of them. There are also other document shredders for sale. Please also see my other ads.

Guillotine-type mechanical shear for cutting plastic sheet in industrial processes. Brand: Jwell Cutting width: 1440 mm Maximum thickness: up to 6 mm Geared motor: 7.5 hp (5.5 kW) Type: Mechanical Guillotine Applications: - Cutting rigid or flexible plastic sheet - Post-process extrusion - Plate and film production - Preparation for thermoforming