Modelo
(Fabricante: WEINGARTEN)
pressure: 63 t throat: 260 mm stroke: 8-100 mm ram - range of adjustment: 63 mm no. of strokes: 115 Hub/min : 316 mm table surface area: 630x490 mm ram surface: 315x260 mm hole in the table: Ø 140 mm total power requirement: 4 kW weight of the machine ca.: 7,5 t dimensions of the machine ca.: 2000x2000x2700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Prensa excéntrica de una columna WEINGARTEN tipo E 40Masch. Nº 643/62 Año de construcción 1963Capacidad de presión 40 ton. Proyección 250 mmApertura de la mesa 150 x 80 y 200 mmÁrea de la mesa 560 x 460 mmÁrea del émbolo 250 x 200 mmCarrera del émbolo ajustable 8-88 mmAjuste del émbolo 63 mmAltura de instalación 320 mmOrificio del pasador 40 mmVelocidad de carrera 100/130 golpes / min. Potencia del motor 2,2 / 3 kWNeción eléctrica 400 voltios, 50 HzAltura de la mesa sobre el suelo 840 mm- Combinación embrague-freno de WEINGARTEN acoplamiento roscado por fricción con TDC
Prensa excéntrica de una sola columna WEINGARTEN tipo ERV 40Masch. Nº 537 / 65 Año de construcción 1965Fuerza de compresión 40 ton. Proyección 230 mmTamaño de la mesa 570 x 470 mmÁrea del émbolo 250 x 200 mmOrificio del pasador de sujeción 40 mmAltura de instalación máx. aprox. 520 mmAjuste de la carrera 8 - 88 mmRango de ajuste del émbolo 63 mmVelocidad de carrera 70 golpes por minutoPotencia de accionamiento 3 kWNetz conexión 380 voltios, 50 Hz- Ajuste de la altura de la mesa- Protección contra sobrecarga mediante placa de trituración- Combinación embrague-freno mediante acoplamiento roscado por fricción WINGARTEN-
Prensa excéntrica de una sola columna WEINGARTEN tipo ER 63Masch. Nº 52A / 63 Año de construcción 1963Capacidad de presión 63 ton. Proyección 280 mmSuperficie de la mesa 630 x 530 mmCarrera del émbolo ajustable 8-100 mmAjuste del émbolo 63 mmVelocidad de carrera 65 carreras / min. Potencia del motor 4 kWNetz conexión 380 voltios, 50 Hz- Combinación embrague-freno de embrague roscado de fricción WINGARTEN- Liberación eléctrica de la carrera mediante interruptor de pie- Contadores de ruedas- Protección contra sobrecarga mediante placa de aplastamiento- Cigüeñales delanteros Cojinete de apoyoNecesidad de espacio L x W x H 1500
Weingarten AR 63 tonCapacidad: 63 ton Carrera máxima ajustable: 8 > 100 mm Velocidad de estirado: 56/84 str/min Dimensiones de la mesa: 620 x 500 mm Diámetro del orificio de la mesa: 250 mm Diámetro del punzón: 40 mm Ajuste de curso: 63 mm Peso: 4 toneladas
CONTROLS conventional PRESS DESIGN drive system: eccentric / crank frame design: C-frame, single sided PRESS FORCES total force (nominal): 100 to SLIDE slide force: 100 to stroke rate (max.): 72 /min SLIDE (MECHAN. PRESS) slide adjustment: 80 mm stroke adjustment: yes stroke min.: 8 mm stroke max.: 112 mm TOOL ASSEMBLY DIMENSIONS shut height (stroke down, adjustment up), BDC: 407 mm ATTACHMENTS (PRESSES) 2-hand engagement: yes for safe tools only
Ram, rams for an eccentric press, single column press, punching machine, single column eccentric press, eccentric press - single column, press -Spare part: comes from a Weingarten eccentric press -Stroke adjustment: 10-80mm -Plunger area: 320 x 65 mm -Plunger mount: O 40 mm -Plunger adjustment thread: M64 x 6 mm -Plunger adjustment ball head: approx. 92 mm -Dimensions: 875/320/H190 mm -Weight: 164 kg -Pressure unknown
Fuerza de prensa: 100 t, velocidad de recorrido: 60/min, carrera de presión: 8mm-137mm, ajuste de ram: 80mm, profundidad de garganta: 375mm, dimensiones de la mesa X/Y/Z: 800mm/630mm, dimensiones de la máquina X/Y/Z: aprox. 1500mm/2400mm/3500mm, peso: aprox. 8800kg. Es posible realizar una inspección in situ.
Fuerza de prensado: 3150 kN, dimensiones de la mesa X/Y: 2500 mm/1600 mm, carrera (fija): 280 mm, velocidad de carrera: 20-80 carreras/min, peso: aprox. 68000 kg. Incluye línea de transferencia y alimentación Dreher. El sistema de control está defectuoso. Documentación disponible. Es posible realizar una inspección in situ.
Presión: 25 tThroat: 200 mmCarrera: mmPresión: 25 tNo. Número de carreras: 140 Hub/minventana en el marco: 240 mmajuste de la carrera: 8...80 mmram - rango de ajuste: 50 mmsuperficie del ariete: 355 x 220 mmtamaño de la mesa: 560 x 400 mmagujero en la mesa: 160 mmpotencia total: 3 kWpeso de la máquina aprox.: 2,23 tdimensiones de la máquina aprox.: m- distancia de la mesa deslizante: 250 mmLos datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.
pressure: 40 t throat: 240 mm stroke: 8-88 mm no. of strokes: 57/86 Hub/min ram - range of adjustment: 63 mm table surface area: 560x450 mm ram surface: 240x200 mm hole in the table: Ø100 mm table height: 840 mm tool hole in ram: Ø40 mm weight of the machine ca.: 3,5 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 80 t throat: 280 mm stroke: 8 - 112 mm no. of strokes: 30 - 120 Hub/min distance table/ram, max. stroke up, adjustment up: 500 mm table surface area: 840 x 580 mm hole in the table: 150 mm table height over floor: 910 mm passage to the back: 640 mm ram surface: 560 x 300 mm ram adjustment: 80 mm power capacity: 7,5 kW total power requirement: kW weight of the machine ca.: 6,5 t dimensions of the machine ca.: 1,4 x 2,3 x 3,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 63 t throat: 280 mm stroke: 8 - 100 mm no. of strokes: 65 Hub/min ram adjustment: 63 mm table surface area: 620 x 500 mm distance table/ram, max. stroke up, adjustment up: 415 mm hole in the table: 230 mm table height over floor: 800 mm ram surface: 310 x 255 mm power capacity: 5,5 kW total power requirement: kW weight of the machine ca.: 3,95 t dimensions of the machine ca.: 1,20 x 1,80 x 2,40 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Capacidad de prensa: 30 ton Profundidad de la garganta: 160 Carrera del ariete ajustable: 20 - 45 mm Ajuste de la corredera: 10 / 60 mm Altura de cierre (carrera hacia abajo, ajuste hacia arriba): 220 mm Área de la superficie de la mesa: 470 x 300 mm Área de la corredera: 250 x 190 mm Número de carreras: 80 - 240 s.p.m. Potencia requerida: 4 kW Dimensiones L x W x H: 1.400 x 1.800 x 2.000 mm Peso de la máquina aprox.: 2,67 ton
pressure: 160 t no. of strokes: 40 - 120 Hub/min sheet width: mm total power requirement: 40 kW Pressing capacity 160 ton Table clamping area 1,100 x 1,280 mm Ram clamping area 850 x 890 mm Distance between guides 1,120 mm Distance between columns (below guide ways) 1,350 mm Distance between Table and ram in upper position approx. 400 mm No. of strokes 40 - 120 /min Adjustment of stoke 67 / 115 / 160 mm Ram adjustment, motor driven 125 mm Ejector travel 50 mm Total electrical load, approx. 40 kW - 500 V - 50 Hz Weight, approx. 24,000 kg Accessories / Special Features WEINGARTEN Sheet Metal Uncoiler with overhead loop control (space saving because it does not need a loop-pit). Strip width 375 mm. The loop control guides the strip-material from the uncoiler to the machine thru a straightening device with automatic supervision. 8-track slide bearing guide. Automatic oil-circulation lubr ...
pressure: 125 t throat: 330 mm stroke: 20-120 mm no. of strokes: 50 Hub/min ram - range of adjustment: 100 mm table surface area: 800x640 mm ram surface: 500x400 mm hole in the table: Ø 330 mm table height: 850 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 8 t dimensions of the machine ca.: 1500x2000x3000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 63 t throat: 320 mm stroke: 8-100 mm no. of strokes: 120 Hub/min ram - range of adjustment: 63 mm table surface area: 860x620 mm ram surface: 540x360 mm hole in the table: Ø 270 mm table height: 850 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 5,5 t dimensions of the machine ca.: BxTxH 1500x2000x2700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 500 t distance between columns: 1600 mm stroke: 60 mm max. ram stroke: 60 1 / min ram adjustment: 100 mm dayligth: 700 mm Table area: 1600x1400 mm ram surface: 1400x1150 mm total power requirement: kW weight of the machine ca.: 40 t dimensions of the machine ca.: m About usmore than 400 machines in the warehouse over 12000 m² storage area, crane capacity 70 tmore than 1000 items accessories for your workshopYou want to sell machines production lines or your company, then talk to us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 100 t throat: 410 mm stroke: 8-112 mm no. of strokes doubel-strokes per min.: 55 / 82 ram - range of adjustment: 80 mm table surface area: 950 x 700 mm ram surface: 700x450 mm hole in the table: Ø 280 mm table height: 850 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 7,0 t dimensions of the machine ca.: 1400x2200x2800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 80 t throat: 300 mm stroke: 8-112 mm no. of strokes: 60 Hub/min ram adjustment: 80 mm table surface area: 700x550 mm ram surface: 400x300 mm table height: 870 mm hole in the table: Ø 280 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 5,0 t dimensions of the machine ca.: 1500x2000x2700 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 40 t throat: 230 mm stroke: 8-88 mm throat: 230 mm no. of strokes: 130 Hub/min ram - range of adjustment: 63 mm table surface area: 560x450 mm ram surface: 250x200 mm hole in the table: Ø 190 mm table height: 790 mm tool hole in ram: Ø 40 mm weight of the machine ca.: 3,0 t dimensions of the machine ca.: 1000x1800x2500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 63 t throat: 280 mm stroke: 8-100 mm ram surface: 310x260 mm table surface area: 620x500 mm hole in the table: Ø 250 mm no. of strokes: 56/84 Hub/min ram - range of adjustment: 63 mm weight of the machine ca.: 4,0 t dimensions of the machine ca.: 1200x1900x2800 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 100 t throat: 410 mm stroke: 8-112 mm no. of strokes: 55/82 Hub/min ram - range of adjustment: 80 mm table surface area: 950x700 mm ram surface: 700x450 mm hole in the table: Ø 280 mm table height: 800 mm total power requirement: 11 kW weight of the machine ca.: 7,5 t dimensions of the machine ca.: BxTxH 1600x2200x3000 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 80 t throat: 320 mm stroke: 8-112 mm no. of strokes: 60 Hub/min ram - range of adjustment: 80 mm : 355 mm table surface area: 720x550 mm ram surface: 400x310 mm sheet thickness - max.: 11 mm weight of the machine ca.: 9,5 t Overall size: 2000x2000x2700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 10 t throat: 170 mm stroke: 6-60 mm no. of strokes: 160 Hub/min ram - range of adjustment: 40 mm table surface area: 420x320 mm ram surface: 180x140 mm hole in the table: Ø 120 mm table height: 850 mm tool hole in ram: Ø 32 mm weight of the machine ca.: 1 t dimensions of the machine ca.: 1200x1200x1900 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 80 t throat: 280 mm stroke: 8-112 mm no. of strokes: 55 / 82 Hub/min ram - range of adjustment: 80 mm table surface area: 800x570 mm ram surface: 560x355 mm hole in the table: Ø 280 mm table height: 800 mm tool hole in ram: Ø 50 mm total power requirement: 7,5 kW weight of the machine ca.: 6 t dimensions of the machine ca.: BxTxH 1600x2200x3000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 63 t throat: 330 mm stroke: 8-100 mm no. of strokes: 56/84 Hub/min ram - range of adjustment: 63 mm table surface area: 850x600 mm ram surface: 550x360 mm hole in the table: Ø 240 mm table height: 800 mm tool hole in ram: Ø 40 mm weight of the machine ca.: 4,5 t dimensions of the machine ca.: 1300x2000x2700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
