Модель
(Производитель: WEINGARTEN)
pressure:200 t stroke:30 - 160 mm no. of strokes:40 - 120 /min distance between columns:1500 mm distance between oil collecting pans:1300 mm distance table/ram, max. stroke up, adjustment up:860 mm hole in the table:550 x 300 mm table surface area:1250 x 1250 mm table height over floor:1000 mm column travel -side:600 x 530 mm ram surface:1250 x 1000 mm ram adjustment:125 mm Material width of feeder:30 - 500 mm Material thickness feeder:0,5 - 3,0 mm feeding length:0 - 999,9 mm power requirement:50,0 kW weight:34,0 t dimensions (WxDxH):4,0 x 1,7 x 5,2 m clutch-/ brake combination:pneumatisch, Ortlinghaus overload protection in ram:hydraulisch ram adjustment:automatisch stroke adjustment:automatisch ram counterbalance:pneumatisch roll feed:Weingarten, WE 60 Option: NEW electrical controls:Siemens S7-1500 F
pressure:080 t throat:280 mm stroke:8 - 112 mm no. of strokes:30 - 120 /min distance table/ram, max. stroke up, adjustment up:500 mm table surface area:840 x 580 mm hole in the table:150 mm table height over floor:910 mm passage to the back:640 mm ram surface:560 x 300 mm ram adjustment:80 mm power requirement:7,5 kW weight:8,0 t dimensions (WxDxH):1,6 x 2,3 x 3,3 m German Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 overload protection in ram:hydraulisch ram adjustment:motoric
pressure:500 t stroke:fix 300 mm no. of strokes:20 - 70 Hub/min distance between columns:3100 mm side window:1400 mm distance table/ram, max. stroke up, adjustment up:1000 mm Table area:2800 x 1600 mm ram surface:2800 x 1450 mm ram adjustment:100 mm power requirement:90,0 kW weight:100,0 t Dimensions (WxDxH):5,75 x 3,2 x 7,8 m height above floor:6,4 m height beneath floor:1,4 m clutch:pneumatic; Ortlinghaus ram adjustment:motoric overload protection in ram:hydraulic ram counterbalance:pneumatic
Pressure:080 t throat:345 mm stroke:20 - 160 mm no. of strokes:65 /min distance table/ram, max. stroke up, adjustment up:495 mm table surface area:920 x 610 mm table height over floor:800 mm Hole in the table:280 mm passage to the back:670 mm ram surface:650 x 400 mm ram adjustment:50 mm power capacity:10,0 kW weight:7,7 t Dimensions (WxDxH):1,5 x 2,2 x 3,15 m German Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 overload protection in ram:hydraulic ram adjustment:motoric
pressure: 25 t throat: 220 mm stroke: 8 - 80 mm mm total power requirement: 2,2 kW weight of the machine ca.: 2 t dimensions of the machine ca.: 0,9 x 1,5 x 2,0 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 16 t throat: 210 mm stroke: 8-68 mm table:: 480 x 380 mm strokes per minute: 150 ram adjustment: 50 mm total power requirement: 3 kW weight of the machine ca.: 2 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 25 t throat: 200 mm stroke: mm pressure: 25 t no. of strokes: 140 Hub/min window in frame: 240 mm adjustment of stroke: 8...80 mm ram - range of adjustment: 50 mm surface of ram: 355 x 220 mm table-size: 560 x 400 mm hole in table: 160 mm total power requirement: 3 kW weight of the machine ca.: 2,23 t dimensions of the machine ca.: m Press force: 25 t Throat depth: 200 mm Stroke: on request Press capacity: 25 t Strokes per minute: 140 spm Daylight opening: 240 mm Stroke adjustment: 8 – 80 mm Ram adjustment: 50 mm Ram face: 355 × 220 mm Table size: 560 × 400 mm Table opening: 160 mm Total power requirement: 3 kW Machine weight: approx. 2.23 t Distance between table and ram: 250 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 80 t throat: 280 mm stroke: 8 - 112 mm no. of strokes: 30 - 120 Hub/min distance table/ram, max. stroke up, adjustment up: 500 mm table surface area: 840 x 580 mm hole in the table: 150 mm table height over floor: 910 mm passage to the back: 640 mm ram surface: 560 x 300 mm ram adjustment: 80 mm power capacity: 7,5 kW total power requirement: kW weight of the machine ca.: 6,5 t dimensions of the machine ca.: 1,4 x 2,3 x 3,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 63 t throat: 280 mm stroke: 8 - 100 mm no. of strokes: 65 Hub/min ram adjustment: 63 mm table surface area: 620 x 500 mm distance table/ram, max. stroke up, adjustment up: 415 mm hole in the table: 230 mm table height over floor: 800 mm ram surface: 310 x 255 mm power capacity: 5,5 kW total power requirement: kW weight of the machine ca.: 3,95 t dimensions of the machine ca.: 1,20 x 1,80 x 2,40 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 500 t distance between columns: 1600 mm stroke: 60 mm max. ram stroke: 60 1 / min ram adjustment: 100 mm dayligth: 700 mm Table area: 1600x1400 mm ram surface: 1400x1150 mm total power requirement: kW weight of the machine ca.: 40 t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the ...
pressure: 160 t no. of strokes: 40 - 120 Hub/min sheet width: mm total power requirement: 40 kW Pressing capacity 160 ton Table clamping area 1,100 x 1,280 mm Ram clamping area 850 x 890 mm Distance between guides 1,120 mm Distance between columns (below guide ways) 1,350 mm Distance between Table and ram in upper position approx. 400 mm No. of strokes 40 - 120 /min Adjustment of stoke 67 / 115 / 160 mm Ram adjustment, motor driven 125 mm Ejector travel 50 mm Total electrical load, approx. 40 kW - 500 V - 50 Hz Weight, approx. 24,000 kg Accessories / Special Features WEINGARTEN Sheet Metal Uncoiler with overhead loop control (space saving because it does not need a loop-pit). Strip width 375 mm. The loop control guides the strip-material from the uncoiler to the machine thru a straightening device with automatic supervision. 8-track slide bearing guide. Automatic oil-circulation lubr ...
A complete 8-stage transfer press line with a Weingarten double-column transfer press is available. 1) Mechanical double-column transfer press Weingarten S.3100.08.70.1, year of manufacture: 1969, tool stations: 9, forming stages: 8, total press force: 3100t, press force blanking slide/drawing slide: 300t/2800t, strokes: 28/min, blanking slide stroke: 200mm, drawing slide stroke: 500mm, max. drawing depth: 120mm, drawing slide ejector stroke: 100mm, blank holder stroke: 50mm, drawing cushion force: 25t, transfer pitch: 700mm, max. blank dimensions X/Y: 450mm/450mm, max. blank diameter: 540mm, table dimensions X/Y: 1200mm/5600mm, main motor power: 300kW, machine dimensions X/Y/Z: approx. 10500mm/7500mm/9700mm, weight (according to documentation): approx. 524t, stroke counter reading (September 2024): approx. 25 million. 2) Blanking and cutting press Georg Maschinentechnik PKD 630, year of ...
Ram, rams for an eccentric press, single column press, punching machine, single column eccentric press, eccentric press - single column, press -Spare part: comes from a Weingarten eccentric press -Stroke adjustment: 10-80mm -Plunger area: 320 x 65 mm -Plunger mount: O 40 mm -Plunger adjustment thread: M64 x 6 mm -Plunger adjustment ball head: approx. 92 mm -Dimensions: 875/320/H190 mm -Weight: 164 kg -Pressure unknown
Усилие прессования: 3150 кН, размеры стола X/Y: 2500 мм/1600 мм, ход (фиксированный): 280 мм, скорость хода: 20-80 ходов/мин, вес: ок. 68000 кг. Включая линию передачи и подачи Dreher. Неисправна система управления. Документация имеется. Возможен осмотр на месте.
CONTROLS conventional PRESS DESIGN drive system: eccentric / crank frame design: C-frame, single sided PRESS FORCES total force (nominal): 100 to SLIDE slide force: 100 to stroke rate (max.): 72 /min SLIDE (MECHAN. PRESS) slide adjustment: 80 mm stroke adjustment: yes stroke min.: 8 mm stroke max.: 112 mm TOOL ASSEMBLY DIMENSIONS shut height (stroke down, adjustment up), BDC: 407 mm ATTACHMENTS (PRESSES) 2-hand engagement: yes for safe tools only
pressure: 100 t throat: 375 mm stroke: 20-125 mm no. of strokes: 60 Hub/min ram - range of adjustment: 80 mm table surface area: 920x660 mm ram surface: 700x450 mm hole in the table: Ø90 mm tool hole in ram: Ø50 mm weight of the machine ca.: 8 t dimensions of the machine ca.: 2100x1500x3300 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 63 t throat: 260 mm stroke: 8-100 mm ram - range of adjustment: 63 mm no. of strokes: 115 Hub/min : 316 mm table surface area: 630x490 mm ram surface: 315x260 mm hole in the table: Ø 140 mm total power requirement: 4 kW weight of the machine ca.: 7,5 t dimensions of the machine ca.: 2000x2000x2700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Одноколонный эксцентриковый пресс WEINGARTEN тип E 40Masch. No 643/62 Год постройки 1963 Грузоподъемность 40 тонн. Выступ 250 ммОтверстие стола 150 x 80 и 200 ммПлощадь стола 560 x 460 ммПлощадь плунжера 250 x 200 ммХод плунжера регулируемый 8-88 ммРегулировка плунжера 63 ммВысота установки 320 ммОтверстие для штифта 40 ммСкорость хода 100/130 ходов/мин. Мощность двигателя 2,2 / 3 кВтПодключение 400 вольт, 50 ГцВысота стола над полом 840 мм- Комбинация сцепления-тормоза от фрикционной резьбовой муфты WEINGARTEN с ВМ
Одноколонный - эксцентриковый пресс WEINGARTEN типа ERV 40Masch. No 537/65 Год постройки 1965Усилие сжатия 40 тонн. Выступ 230 ммРазмер стола 570 x 470 ммПлощадь плунжера 250 x 200 ммОтверстие для зажимного штифта 40 ммВысота установки макс. ок. 520 ммРегулировка хода 8 - 88 ммДиапазон регулировки плунжера 63 ммСкорость хода 70 ударов в минутуМощность привода 3 кВтПодключение 380 вольт, 50 Гц- Регулировка высоты стола- Защита от перегрузки с помощью раздавливающей пластины- Комбинация сцепления и тормоза с помощью фрикци ...
Одноколонный - эксцентриковый пресс WEINGARTEN типа ER 63Masch. No 52А/63 Год постройки 1963Грузоподъемность по давлению 63 тонны. Проекция 280 ммПоверхность стола 630 x 530 ммРегулируемый ход плунжера 8-100 ммРегулировка плунжера 63 ммСкорость хода 65 ходов/мин. Мощность двигателя 4 кВтПодключение 380 Вольт, 50 Гц- Комбинация сцепления и тормоза с помощью фрикционной резьбовой муфты WEINGARTEN- Электрическая разблокировка хода с помощью ножного переключателя- Счетчики колес- Защита от перегрузки с помощью дробящейс ...
pressure: 40 t throat: 240 mm stroke: 8-88 mm no. of strokes: 57/86 Hub/min ram - range of adjustment: 63 mm table surface area: 560x450 mm ram surface: 240x200 mm hole in the table: Ø100 mm table height: 840 mm tool hole in ram: Ø40 mm weight of the machine ca.: 3,5 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Производительность пресса: 30 тонн Глубина горловины: 160 Регулировка хода цилиндра: 20 - 45 мм Регулировка ползуна: 10 / 60 мм Высота закрытия (ход вниз, регулировка вверх): 220 мм Площадь поверхности стола: 470 x 300 мм Площадь ползуна: 250 x 190 мм Количество ходов: 80 - 240 с./мин. Требуемая мощность: 4 кВт Габариты Д x Ш x В: 1.400 x 1.800 x 2.000 мм Вес машины ок.: 2,67
pressure: 125 t throat: 330 mm stroke: 20-120 mm no. of strokes: 50 Hub/min ram - range of adjustment: 100 mm table surface area: 800x640 mm ram surface: 500x400 mm hole in the table: Ø 330 mm table height: 850 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 8 t dimensions of the machine ca.: 1500x2000x3000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 63 t throat: 320 mm stroke: 8-100 mm no. of strokes: 120 Hub/min ram - range of adjustment: 63 mm table surface area: 860x620 mm ram surface: 540x360 mm hole in the table: Ø 270 mm table height: 850 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 5,5 t dimensions of the machine ca.: BxTxH 1500x2000x2700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 100 t throat: 410 mm stroke: 8-112 mm no. of strokes doubel-strokes per min.: 55 / 82 ram - range of adjustment: 80 mm table surface area: 950 x 700 mm ram surface: 700x450 mm hole in the table: Ø 280 mm table height: 850 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 7,0 t dimensions of the machine ca.: 1400x2200x2800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 80 t throat: 300 mm stroke: 8-112 mm no. of strokes: 60 Hub/min ram adjustment: 80 mm table surface area: 700x550 mm ram surface: 400x300 mm table height: 870 mm hole in the table: Ø 280 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 5,0 t dimensions of the machine ca.: 1500x2000x2700 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 40 t throat: 230 mm stroke: 8-88 mm throat: 230 mm no. of strokes: 130 Hub/min ram - range of adjustment: 63 mm table surface area: 560x450 mm ram surface: 250x200 mm hole in the table: Ø 190 mm table height: 790 mm tool hole in ram: Ø 40 mm weight of the machine ca.: 3,0 t dimensions of the machine ca.: 1000x1800x2500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 63 t throat: 280 mm stroke: 8-100 mm ram surface: 310x260 mm table surface area: 620x500 mm hole in the table: Ø 250 mm no. of strokes: 56/84 Hub/min ram - range of adjustment: 63 mm weight of the machine ca.: 4,0 t dimensions of the machine ca.: 1200x1900x2800 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
