WEEKE maquina usada para la venta

Características técnicas: Longitud de la pieza: mín. 200 mm Longitud de la pieza: máx. 2500 mm Anchura de la pieza: mín. 70 mm Anchura de la pieza: máx. 850 mm Espesor de la pieza: mín. 12 mm (para mecanizado plano) mín. 16 mm (para mecanizado horizontal) máx. 60 mm Peso de la pieza: máx. 30 kg Velocidad de los ejes: Velocidad vectorial X/Y = 30 m/min Z = 15 m/min Funciones: Área de documentos de piezas de trabajo Soporte mecánico mediante transportador de rodillos para piezas. Área de extracción de piezas de trabajo Soporte mecánico mediante transportador de rodillos para piezas Engranaje de perforación V8 Carrera de avance en dirección Z: 60 mm Profundidad de perforación: máx. 38 mm Sentido de rotación: derecha/izquierda Velocidad: 2800 1/min, control de frecuencia Propulsión: 1,8 kW Portabrocas : d = 10 mm para Sistema de cambio r ...

Centro de mecanizado vertical WEEKE BHX055 con cambiador de herramientas Tipo: Weeke BHX 055 Horas de funcionamiento: 4.340 horas Características técnicas: Centro de mecanizado controlado por CNC para taladrado, fresado y aserrado y cambiador de herramientas de 4 pliegues Rango de trabajo de los ejes: mín. 200 70 mm, máx. 3,050 850 mm Espesor máximo de trabajo: 12-60 mm Peso máximo de la pieza: 35 KG Alimentar: X, Y: 50 m/min Z: 15 m/min Perforación V13: 5 husillos de perforación para taladrar verticalmente en la parte superior en la dirección de inchXinch para ser controlados individualmente 4 husillos de perforación para taladrado vertical en la parte superior en la dirección de pulgadaYinch controlados individualmente 4 Husillo de perforación para perforación horizontal en la parte superior en la dirección de inchXinch para ser controlad ...

Características técnicas: Longitud de la pieza: mín. 200 mm Longitud de la pieza: máx. 3050 mm Anchura de la pieza: mín. 70 mm Anchura de la pieza: máx. 850 mm Espesor de la pieza: mín. 12 mm (para mecanizado plano) mín. 12 mm (para el mecanizado horizontal en los dos bordes transversales y en el borde superior), Nota: Al taladrar horizontalmente desde el borde inferior, solo se permite el taladrado central hasta un espesor de pieza de 19 mm. máx. 60 mm Peso de la pieza: máx. 30 kg Velocidad de los ejes: Velocidad vectorial X/Y = 50 m/min Z = 15 m/min Funciones: Área de documentos de piezas de trabajo Soporte mecánico mediante transportador de rodillos para piezas. Área de extracción de piezas de trabajo Soporte mecánico mediante transportador de rodillos para piezas. Engranaje de perforación V13 Carrera de avance en dirección Z: 60 mm Profun ...

Técnicas: - Área de trabajo del eje X: 3130 mm - Área de trabajo del eje Y: 1250 mm - Mesa de trabajo, vaina y riel - Potencia del electromandril principal: 9 KW - Número de ejes controlados: 4 ejes - Número total de husillos de perforación: 12 - Número total de posiciones del cambiador de herramientas: 8

Key data: 3250 mm, 1250 mm, 125 mm

Máquina de 4 ejes con mesa consola, 6 soportes se pueden mover manualmente en X, 2 ventosas por consola, Bomba de vacío 100m³/h Conexión de vacío para plantillas Pantalla LED para la indicación de la posición de la ventosa Rango de trabajo X: 200 – 3250 mm Rango de trabajo Y: 70 – 1250 mm Rango de trabajo Z: 12 – 125 mm (paso 150 mm) 19 husillos de perforación vertical 6 husillos de perforación horizontales, 4 de los cuales están en la dirección X y 2 en la dirección Y. Sierra de ranura giratoria 90 Husillo de fresado de 12 kW hasta 24000 rpm con interpolación 360 del eje C, refrigeración por circulación líquida – Espacio de recogida trasero WZW de 14 velocidades y lateral derecho de 14 velocidades Unidades adaptadoras: -Caja de cerradura 2 husillos con boquilla de soplado -Unidad de aserrado, taladrado y fresado Flex 5 -Cruceta de 4 husillos Ayu ...

Key data: 2500 mm, 1000 mm, 80 mm

Weeke BHX 500 con amortiguador de erizo en la entrada Amortiguador de erizo con 30 posiciones de amortiguación, longitud total: 5700 mm Anchura útil: 2000 mm Movible manualmente Centro de mecanizado Weeke con un soporte de mecanizado en la parte superior y otro en la parte inferior Mesa de inserción con alimentación y posicionamiento automático de la pieza DIMENSIONES DE LA PIEZA DE TRABAJO Longitud mínima de la pieza: 200 mm Longitud máx. de la pieza: 2500 mm Anchura mínima de la pieza: 70 mm Anchura máxima de la pieza: 1000 mm Espesor mínimo de la pieza: 4 mm Espesor máx. de la pieza: 80 mm Máx. apilamiento de piezas: 2 uds. Configuración de la máquina: 2V32 ALTA VELOCIDAD 7500 Unidad de perforación vertical dispuesta en el soporte de mecanizado superior e inferior, cada uno con 32 husillos de taladrado (controlables individualmente con rango de veloci ...

Taladradora, encolado e inserción de duebel controlada por CNC También es adecuado para taladrar conectores de muebles debido a 3 ejes controlados Se puede enviar un video de la máquina en funcionamiento a pedido. Ancho de trabajo máx. 1250mm, para ocupación doble 600mm con tope central neumático 4 abrazaderas neumáticas para piezas de trabajo Unidad de perforación horizontal con 3 taladros recuperables individualmente, potencia del motor 1.5kW Unidad de perforación vertical con 3 taladros recuperables individualmente, potencia del motor 1.5kW Eje X, eje Y, eje Z controlado por CNC Como resultado, son posibles cambios rápidos entre diferentes espesores de material. Longitud del pasador 30 y 35 mm, actualmente establecida en 8x30 mm Transportador vibratorio para clavijas de madera Monitoreo de pegamento Cantidad de pegamento ajustable electrónicamente Alimenta ...

Centro de mecanizado CNC SEMANA Tipo: BHC 280 Woodwop 5.0: Año: 2005 4 Ejes

There is a milling line for lock and hinge available, line includes (1) lock and hinge milling machine, with top/ bottom handle hole unit, lock case milling and drilling machine (2) shifting and aligning unit (3) hinge machine with right and left turning miller and drilling aggregates, max. work piece dimensions: 3000x1350x72mm, speed: 50s/workpiece, length: 13,505mm, width: 4456mm, including documentation, available in March 2023.

CNC processing centre Brand: Weeke Type: Optimat BHC 655 Year: 2004 - axis movement (X-/Y-/Z-direction) via a compact linear guide system, dust-protected - ball screw spindle (Y- and Z-direction) and rack and pinion drive (X direction) Software: WOODWOP, machine data acquisition, provision of teleservice BASIS-table basic equipment 6 traverses 1 low-maintenance vacuum pump with 100 m³/h output 6 traverses, continuously adjustable in the X direction 4 program-controlled workpiece stops, mounted as a rear row of stops 6 program-controlled workpiece stops, mounted as a front row of stops 2 side stops mounted on an aluminium profile in Y-direction, which can be switched off manually when oversized workpieces are being processed. The side stops can be adjusted manually in Y-direction. 6 workpiece lifting arms for heavy workpieces Milling spindle HSK 9 kW (S6 50%), l ...

Z-travel: 370mm, max. workpiece thickness: 100mm, connected load: 14-22kW.

CNC working center Weeke Type: Professional BHC 600 Year of construction: 2003 TOOL CHANGE SPINDLE 12 KW - HSK F63 INCL. LIQUID RECIRCULATION infinitely variable 1,250 - 24,000 rpm. programmable max. 9/12 kW in continuous/intermittent operation (S1/S6-50%) WORKING LENGTH X AXIS 7250 MM WORKING WIDTH Y-AXIS 1300 MM AUTOMATIC TOOL CHANGE MAGAZINE FOR 8 PLACES (PLATE CHANGER) AUTOMATIC TOOL CHANGER M. 18 MAGAZINE PLACES Automatic tool changing system in the X direction riding on the machine stand AGGREGATE INTERFACE F.D.MAIN SPINDLE, To accommodate the adapter units including interface Pneumatic and swivel drive C-axis with Torque entrainment and 3-point support VERTICAL DRILLING UNIT, 26 SPINDLES Drive: 1.5 kW 11 spindles with step 32 mm in X-direction 11 spindles with step 32 mm in Y-direction 4 spindles with step 50 mm in X-direction Spindle type: indiv ...

Description: Three axes, axis travel: X  ,- 3860 mm, Y - 1822 mm, Z1 - 325 mm, Z2 - 185 mm, Operating hours approx. 48'369, work table: X - 3250mm Y - 1250 mm, Z - 125 mm, automatic tool spindle in combination with tool change magazine, tool holder: HSK 63, rotation speed: 1250 - 24,000 rpm infinitely programmable, maximum power at the tool up to 7.5/9 KW, C - axis aggregate interface, automatic tool change magazine with 14 places maximum tool weight 5 kg without units, with CE certificate, Lista drawer cabinet, contents: dowel drills, milling cutters, collets, various tool holders, some with tools, Windows 10 operating system working width y-axis: 1,250 mm, working height z-axis: 125 mm, working length x-axis: 3,250 mm, drilling spindles horizontal x-axis: 4 pieces, drilling spindels horizontal y-axis: 2 pieces, drilling spindels vertical x-axis: 9 pieces, drilling spindles vertical ...

Description: Dust-protected linear guide system Ball screw in X, Y and Z direction Digital drive system in X, Y and Z direction Stop cylinder for workpiece positioning Workpiece length: 200 mm - 3,050 mm 0245 / 0246 - Extension of the working length to 3,050 mm incl. roller conveyor Workpiece width: 70 mm - 850 mm Workpiece thickness: 8 mm - 60 mm 2999 - Machine-specific adaptation Workpiece weight: max. 35 kg 1202 - Drilling gear V13 High Speed Z-direction: 60 mm Drilling depth: max. 38 mm Direction of rotation: R/L Speed: 1,500 - 7,500 rpm - frequency-controlled Drive: 2.3 kW Drill bit holder: 10 mm for quick-change system Total drill bit length: 70 mm Drill diameter: max. 35 mm Spindle type: individually controllable 1128 - horizontal drilling gear with 4 spindles in X-direction 1129 - horizontal drilling gear with 2 spindles in Y-direction 1012 - Grooving ...

Description: • CNC machining centre • Serial number 0-250-06-1632 • Total installed power approx. 18 KW • Useful working area approx. 2750 x 1000 mm • Travelling way X-axis: 3455 mm, Y-axis: 1480 mm, Z-axis: 260 mm • Maximum travel speed in the axes direction x-y-z: 80-60-20 m/min • Tool magazine with 8 positions •  ,Electrospindle: power 7.50 KW-max. 24000 rpm, automatic tool change, for HSK F63 tool holder, liquid cooled • Milling / saw group with 1.50 KW motor • Saw unit to groove • Vertical drilling spindles in X-axis direction: 11 • Vertical drilling spindles in Y-axis direction: 8 • Horizontal drilling spindles in X-axis direction: 3 + 3 • NUM 1040 numerical control • Software Windows 95 / HOMAG WOODWOP • 6 consoles with 2 vacuum suction cups each • 6 lifting modules for heavy workpieces • BECKER KVT 3.100 vacuum pump with capacity 100 m³/h  ...

Description: • CNC machining centre • Serial number 0-250-06-2992 • Total installed power approx. 18 KW • Useful working area approx. 3250 x 1300 mm • Travelling way X-axis: 3955 mm, Y-axis: 1685 mm, Z-axis: 260 mm • Maximum travel speed in the axes direction x-y-z: 80-60-20 m/min • Tool magazine with 8 positions •  ,Electrospindle: power 9 KW-max. 24000 rpm, automatic tool change, for HSK F63 tool holder, liquid cooled • Saw unit to groove • Vertical drilling spindles in X-axis direction: 10 • Vertical drilling spindles in Y-axis direction: 11 • Horizontal drilling spindles in X-axis direction: 2 + 2 • Horizontal drilling spindles in Y-axis direction: 1 + 1 • NUM numerical control • Software Windows / HOMAG WOODWOP • Remote control panel • 6 consoles with 22 vacuum suction cups in total • 5 lifting modules for heavy workpieces • BECKER KVT 3.100 ...

Description: X axis work area 2500 mm Y axis work area 1000 mm Max panel passage 80 mm No. collets 2 Automatic panel stacking system , With Motorised transfer BORING UNITS 1 Unit : top Vertical Boring Spindles : 32 Horizontal Boring Spindles in X : 8 Horizontal Boring Spindles in Y : 2 Total number of vertical + horizontal spindles : 42 BORING UNITS 2 Unit : bottom Vertical Boring Spindles : 32 Horizontal Boring Spindles in X : 8 Horizontal Boring Spindles in Y : 2 Total number of vertical + horizontal spindles : 42 ROUTER SPINDLES 1 Unit : top No. controlled axes : 3 Motor power : 6 kw r.p.m. : 7500 RPM ROUTER SPINDLES 2 Unit : bottom No. controlled axes : 3 Motor power : 6 kw r.p.m. : 7500 RPM GROOVING UNIT 1 Unit : top Unit : with 0 / 90 degree positioning Max. tool diameter : 125 mm r.p.m. : 7500 RPM GROOVING UNIT 2 Unit : bottom Unit : with 0 / 90 degree positioning Max. tool di ...

Description: Type of work Drilling Routing X axis working area 4250 mm Y axis working area 1500 mm Working Table Pod and Rail Main Electrospindle power 11 KW Number of controlled axes 4 axes Total number of drilling spindles 25 Total number of tool changer positions 26 X axis work area 4250 mm X axis travel 5050 mm Y axis work area 1500 mm Y axis travel 2150 mm X axis movement speed 80 m/min Y axis movement speed 60 m/min Z axis movement speed 20 m/min No. working fields 2 Working table yes Working table Pod and Rail No. of Rails 10 Pod Position Indicators yes Vacuum pump yes No. pumps 2 Single capacity 100 m3/h Boring units 1 BORING UNITS 1 Unit : top Vertical Boring Spindles : 25 Router Spindles 1 ROUTER SPINDLES 1 Unit : top No. controlled axes : 4 Motor power : 11 kw r.p.m. : 24000 RPM Grooving unit 1 GROOVING UNIT 1 Unit : top Grooving unit : yes Unit : Fixed for Grooving in X Max.  ...

Description: Work table: X = 3250 mm (length) Y = 1220 mm (width) Z = 125 mm (thickness) CONSOLE TABLE WITH LED POSITIONING SYSTEM (DIODE LIGHT BAND) PROCESSING CONFIGURATION V12, H4X/2Y, N1, F1-HSK-15 KW, C-AXIS, W8 REAR, W8 FRONT Aggregates: HSK63 LOCK CASE, D=16 MM, 2 SPINDLES, HSK63 DRILL/MILLING INCLINABLE, CRANKED VERSION 10 pieces suction cups as per illustration 108651362_Suction cups (1) CE SAFETY AND PROTECTION DEVICE (not provided) - Protective grille in the side and rear area Protective grille only partially present, door present. MACHINE IN NEED OF REPAIR! DESCRIPTION: Machine throws up errors when starting up according to photos in the attachment. Missing error texts, diagnosis only starts when called up several times. Tool is changed, but cannot be stored in changer because changer because changer (system changer) is not referenced. Switch cabinet wired with variou ...

Description: WEEKE BHX055 vertical machining centre with 4-fold tool changer Operating hours: 4,340 hours Technical Data: CNC controlled machining centre drilling, milling and sawing & 4-fold tool changer Net working area: min. 200x70 mm, up to max. 3,050x850 mm Thickness of workpiece: 12-60 mm Weight: Max. 35 kg  , Speed: X, Y: 50 m/min Z: 15 m/min  , Drilling V13: 5 Drill spindlesfor machining the top of workpiece in 'X direction'. All 5 drills can be controlled individually 4 Drill spindles for workpiece machining in 'Y direction'. All 3 drills can be controlled individually 4 Drill spindles for machining the side of the workpiece in 'X direction'. All 4 drills can be controlled individually 2 Drill spindles for machining the side of the workpiece in 'Y direction'. All 2 drills are individually controllable  , Free aggregate: 1 Free aggregate with HSK63 q ...

Description: • , Console , table 'K'  ,  ,- 8 clamping consoles ,  ,  ,- 8 pneumatically lowerable longitudinal stops (rear stop row)  ,  ,- 8 pneumatically lowerable longitudinal stops (centre row of stops)  ,  ,- 1 pneumatically lowerable side stop ruler  ,  ,  , for the right working field  ,  ,- 1 pneumatically lowerable side stop ruler  ,  ,  , for the left working field  ,  ,- ,electronic surveillance of all stop cylinders  ,  ,- 6 Workpiece feeding rails , to ease placing of heavy workpieces attached to the side of the ,  ,  ,  ,  , consoles 1, 3 ,4,5,6 and 8 , - ,LED displays for fast, simple positioning of vacuum clamps and consoles. Chip conveyor belt integrated in the machine frame work table: X = 4500 mm , Y = 1500 mm , Z = 125 mm.  ...

Description: Machine: Net working area:min 200x70 ,mm ,to max 3050x850 ,mm Workpiece thickness:12-60 mm Workpiece weight: max 35 kg Speed: X and Y: 50 m/min, Z: 15 m/min Drill aggregates: 5 Drill spindles for machining the top of workpiece in 'X direction'. All 5 bores are individually adjustable 4 Drill spindles for machining the top of workpiece in 'Y direction'. All 3 bores are individually adjustable 4 Drill spindles for machining the side of the workpiece in 'X direction'. All 4 bores are individually controllable 2 Drill spindles for machining the side of the workpiece in 'Y direction'. All 2 bores are individually controllable Free aggregate - Motor 5 KW-S1 ( 1,250 / 24,000 rpm) Saw aggregate: Integrated saw aggregate - Cutting diameter 100 mm . Equipment: Programming and control system POWER CONTROL PC 85 + WOODWOP SOFTWARE - PC - TFT color screen ...

Working dimensions 2750 x 1220 mm (X,Y) Main spindle 6 kW Drills 12V, 2+4 H Grooving saw 100mm in X axis Tool tray 6 places woodWOP 5.0 software CNC Simulator The machine had a regular service Laser cross for placement of suction cups Incl. documentation and backup SW

horizontal boring - glue injection - dowel inserting Single drill and inserter which can be freely programmed Drilling depth manually adjustable Z-axis with manual setting Workpiece sizes: Length min/max: 20 / 1250 mm Width min/max: 50 / 800 mm Thickness min/max: 10 / 60 mm max. workpiecewidth with middle fence on 2 fields: 600 mm, on 1 field: 1200 mm Middle fence with pneumatic rise/fall 6 vertical pressure units Double membrane glue pump 1:1 Glue viscosity 350 mPas diameter dowels: 6 mm, length of 40 mm. Controlls: Powercontrol PC85 with Woodwop software

4 axis machining center Usefull capacity: 3130 x 1250 mm. (divided in 2 fields) Displacement in X: 3995 mm, Y: 1976 mm, Z1=343 mm Z2=185 mm Moving speed: X: 80 m/min, Y: 80 m/min, Z: 20 m/min 6 supports with vacuum cups, pneumatic clamping Vacuumpump 70 m3/h 6 fences at the rear 6 fences at the front 2 fences left, 2 fences right 1 connection for template 4 rails for panel loading with pneumatic lifting Laser positioning indicator for the vacuum cups Configuration: Main spindle with motor 9 kW, 1250-24000 r/min, air cooled, positioning axis over 360?, HSK63 taper 8 position toolchanger moving with the machining unit in X 8 position toolchanger positioned on the right 6 vertical drills in X, 6 in Y, 2 independant spindles 6 horizontal drills grooving saw in X an Y Woodwop 7.0 programming software aggregates are not included

Fabricante: Weeke, Tipo: BP 140 Optimat, Año: 1997, Control: Woodworp, Rango de trabajo X: 3600, Rango de trabajo Eje Y: 1200, Rango de trabajo Z: 150, Eje C: sí, Número de husillos de fresado: 1, Motor de fresado 1 hora potencia: 7,5, rpm 1): 24000, Número de cambiadores de herramientas: 12, Brocas verticales-X: 10, Brocas verticales Y: 10, Brocas horizontales-X: 4, Broca horizontal Y: 2, Mesa transversal: sí, Bombas de vacío m³/h: 160, Sistema de sujeción de herramientas: HSK 63, Unidad de sierra: sí, Signo CE: sí, Año: 1997

Manufacturer: Weeke, Type: Optimat BP 145, Year: 2001, Control: Homatic 2000 IPC, Software: Woodworp, Working range X: 3250, Working range Y-axis: 1300, Working range Z: 100, C axis: yes, Feeding speed max m/min: 80/60/20, Pendulum processing: yes, Number of milling spindles: 1, Tool adaption system: HSK63F Kegel, Milling engine 1 hours power: 9, rpm 1): 1250-24000 FU geregelt, rpm 2): t, Number of tool changers: 1, Tellerwechseler: yes, Number of tools per tool-magazine: 8, Mitfahrender Werkzeugwechsler: yes, Horizontal drills-X: 4, Drill horizontal Y: 2, Traverse table: yes, Stops in the table front: yes, Stops in the table rear: yes, Vacuum pumps m³/h: 100, Drill vertical: 22, Saw unit: yes, FREE TEXT: 2x Freiplätze für zum Nachrüsten vorbereitet, Year :2001

working length X: 2.500 mm working length Y: 1.300 mm : 4 - 80 mm Number of milling agregates: 2 St. Number of boring motors: 2 St. : 72 : 16 : 4 : 90° schwenkbar : 130 m/min : 80 m/min : 50 m/min : 27 m/min turning speeds: max. 18.000 U/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.