Виробник:
(Категорія: 209)
Панельна пила Тип: Concept 350 Виробник: Fimal Рік: 2019 Головний лопать 350 мм Одиниця попереднього різання Масивна таблиця форматування Точна паралельна лінійка Міцна та стабільна робота 400 В / 3 фази Включено 20 шт. дисків Машина в хорошому стані, під приводом живлення Детальніше можна знайти тут - / Зв'яжіться з нами за адресою -
Верстат для накладання кромок Тип: B 80 KF VR Виробник: LANGE Рік: 2022 Передфрезерний блок Фаска (закруглення кутів) Полірування дисків Установка плавлення у відкритому космосі Сенсорна панель керування 400 В / 3 фази Потужність 6,1 кВт Машина в дуже хорошому стані, під приводом живлення Детальніше можна знайти тут - / Зв'яжіться з нами за адресою -
Вертикальний центр буріння та маршрутизації ЧПУ Тип: Drillteq V-200 Виробник: Homag Рік: 2023 Приблизно 5000 деталей просвердлено Бездротовий зчитувач штрихкодів + програмне забезпечення. Машина в дуже хорошому стані, під приводом живлення Детальніше можна знайти тут - / Зв'яжіться з нами за адресою -
Верстат для накладання кромок Тип: O KDF 210 Виробник: Brandt Рік: 2010 Машина в хорошому стані, під приводом живлення Детальніше можна знайти тут - / Зв'яжіться з нами за адресою -
- Knife ring virute mill for the manufacture of flat chips. - Percussion wheel motor power 250 KW. - Blade ring motor power 22 KW. - Percussion wheel rotation speed 850 rpm. - Cutting circle diameter 1200 mm. - Number of blades: 49. - Blade length 450 mm. - Maximum production up to approx. 10000 kg/h (depending on the type of wood, moisture and chip thickness). - Upper feed hopper with vibratory system and magnet for separation of metal elements. - Stripper. - Operating conditions of this machine: unchecked. - EX WORKS Sale. Dismantling, disconnection, loading and removal at the expense of the buyer, who must comply with current regulations on occupational risk prevention, health and safety in industrial work, providing the necessary documentation, insurance and accreditations. Auction-ID: A7-43986-8
- Centrifugal viruter mill with knife ring for the manufacture of flat chips. - Main motor power 315 KW. - Power of the hydraulic power plant 2.60 KW. - Rotor rotation speed 1107 rpm. - Rotor diameter 1393 mm. - Number of blades: 54. - Blade length 690 mm. - Maximum production up to approx. 20000 kg/h (depending on the type of wood, moisture and chip thickness). - Upper feed hopper with vibratory system and magnet for separation of metal elements. - Stripper. - Operating conditions of this machine: unchecked. - EX WORKS Sale. Dismantling, disconnection, loading and removal at the expense of the buyer, who must comply with current regulations on occupational risk prevention, health and safety in industrial work, providing the necessary documentation, insurance and accreditations. Auction-ID: A7-43986-9
- Oscillating screen with 2 independent screening floors for sorting wood chips and shavings. - Equipped with interchangeable meshes, designed for the classification of fine chips used in the outer layers of chipboard, equipped with 10x10 mm - 2.20 - 2.28 - 0.21 meshes. - Operating conditions of this machine: unchecked. - EX WORKS Sale. Dismantling, disconnection, loading and removal at the expense of the buyer, who must comply with current regulations on occupational risk prevention, health and safety in industrial work, providing the necessary documentation, insurance and accreditations. Auction-ID: A7-43986-12
- Dual-stream mill for fine wood chip production with segmented internal grinding elements. - Main motor power 315 KW. - Equipped with PALLMANN CLEANOMAT system (installed according to documentation in 2009). - Upper feed hopper with vibratory system and magnet for separation of metal elements. - Stripper. - Operating conditions of this machine: unchecked. - EX WORKS Sale. Dismantling, disconnection, loading and removal at the expense of the buyer, who must comply with current regulations on occupational risk prevention, health and safety in industrial work, providing the necessary documentation, insurance and accreditations. Auction-ID: A7-43986-14
- Knife ring virute mill for the manufacture of flat chips. - Percussion wheel motor power 250 KW. - Blade ring motor power 25 KW. - Percussion wheel rotation speed 850 rpm. - Cutting circle diameter 1200 mm. - Number of blades: 49. - Blade length 450 mm. - Maximum production up to approx. 10000 kg/h (depending on the type of wood, moisture and chip thickness). - Upper feed hopper with vibratory system and magnet for separation of metal elements. - Stripper. - Operating conditions of this machine: unchecked. - EX WORKS Sale. Dismantling, disconnection, loading and removal at the expense of the buyer, who must comply with current regulations on occupational risk prevention, health and safety in industrial work, providing the necessary documentation, insurance and accreditations. Auction-ID: A7-43986-7
- Knife ring virute mill for the manufacture of flat chips. - Percussion wheel motor power 250 KW. - Blade ring motor power 22 KW. - Percussion wheel rotation speed 850 rpm. - Cutting circle diameter 1200 mm. - Number of blades: 49. - Blade length 450 mm. - Maximum production up to approx. 10000 kg/h (depending on the type of wood, moisture and chip thickness). - Upper feed hopper with vibratory system and magnet for separation of metal elements. - Stripper. - Operating conditions of this machine: unchecked. - EX WORKS Sale. Dismantling, disconnection, loading and removal at the expense of the buyer, who must comply with current regulations on occupational risk prevention, health and safety in industrial work, providing the necessary documentation, insurance and accreditations. Auction-ID: A7-43986-6
- Oscillating screen with 3 independent screening floors for sorting wood chips and shavings. - Equipped with interchangeable meshes, designed for the classification of chips used in the inner layer of chipboard, equipped with 10x10 mm - 2.20 - 0.36 - powder meshes. - Total installed power 15 KW. - 2 chip inlets with a diameter of 650 mm. - 3 + 3 sieve planes with a total sieving area of 78 m². - Chip outlets: 3 with a diameter of 650 mm and one with a diameter of 500 mm. - Longitudinal distance between supports 3730 mm. - Transverse distance between supports 3940 mm. - Operating conditions of this machine: unchecked. - EX WORKS Sale. Dismantling, disconnection, loading and removal at the expense of the buyer, who must comply with current regulations on occupational risk prevention, health and safety in industrial work, providing the necessary documentation, insurance and accr ...
- Updated in 2002. - Total installed electrical power approx. 200 KW. - Capacity 10000 kg/h (atro) - Water evaporation 9700 kg/h. - Initial humidity 100% (atro). - Final humidity 3% ±1% (atro). - Gas inlet temperature 520 °C. - Gas outlet temperature 130 °C. - Chip output temperature approx. 60 °C (at ambient temperature 10 °C). - Total thermal energy consumption approx. 8,670,000 kcal/h. - Maximum pressure allowed: 26 mbr. - Includes: • Hot air generator. • Fuel oil burner: maximum consumption 600 kg/h. • Dust burner. • Mixing chamber. • Rotary drum dryer: diameter approx. 4000 mm, length approx. 12000 mm. • 4 cyclones for the separation of dry material from process air. • Fans and pipes. • Support structures with stairs and walkways for inspection and maintenance. - Operating conditions of this machine: un ...
- Updated in 2002. - Total installed electrical power approx. 180 KW. - Capacity 8500 kg/h (atro) - Water evaporation 8500 kg/h. - Initial humidity 100% (atro). - Final humidity 3% ±1% (atro). - Gas inlet temperature 550 °C. - Gas outlet temperature 120 °C. - Total thermal energy consumption approx. 7,800,000 kcal/h. - Maximum pressure allowed: 26 mbr. - Includes: • Hot air generator. • Fuel oil burner: maximum consumption 600 kg/h. • Dust burner. • Mixing chamber. • Rotary drum dryer: diameter approx. 3600 mm, length approx. 11000 mm. • 2 cyclones for the separation of dry material from process air. • Fans and pipes. • Support structures with stairs and walkways for inspection and maintenance. - Operating conditions of this machine: unchecked. - EX WORKS Sale. Dismantling, disconnection, loading and removal a ...
Стрічкова пила Тип: HTZ 1100 Pro Виробник: Mebor Рік: 2020 Круглий дерев'яний конвеєр MLD Роликовий конвеєр для пиланої деревини RC M800 L-P Машина в хорошому стані, повністю функціональна Детальніше можна знайти тут - / Зв'яжіться з нами за адресою -
Охолоджувальна ємність: 1,25 кВт: 6,2 м³/хв: 16 барДані для цієї реклами були створені за допомогою ModulMWS — програмного рішення LogoTech oHG.
A high-performance Homag Edgebanding Line paired with a Ligmatech Automatic Return System. This combination allows for a "one-man operation," where the machine applies the edges and then automatically sends the panels back to the operator for the next pass. Below is a professional draft for an online listing. --------------------------------------------------------------- For Sale: 2007 Homag Optimat Edgebanding Cell Featuring: Homag KAL 310 Edgebander & Ligmatech ZHR 05 Return System This is a complete, industrial-grade edgebanding solution manufactured in Germany. The set consists of a high-speed Homag KAL 310 single-sided edgebander and a Ligmatech ZHR 05 Boomerang return conveyor. This setup is designed for high-volume production, significantly reducing labor costs by allowing a single operator to manage the entire infeed and outfeed process. Machine 1: Homag Optimat KAL 310/10/ ...
Motor output: 3 kWFilter capacity: 6 m²: 3500 m³/hThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 10000 m³/hWeight: 700 kgMotor output: 11 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Weight: 870 kgMotor output: 15 kW: 12,500 m³/hThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 8500 m³/hMotor output: 11 kWFilter capacity: 47 m²The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Motor output: 7,5 kWWeight: 450 kg: 6500 m³/hThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
output: 18,5 kwnumber of blades: 28 Weight: 1300 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Filter capacity: 121 m²Air consumption: 13200 m³/hventilator: 15 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
travel -z axis: 1200 mmtravel -x axis: 360 mmWeight: 3250 kgNESTO 4 Axis Pro Cnc Wood Lathe MachineTECHNICAL SPECIFICATIONS- Work Piece Dimension Max Diameter 360 mm - Max length 1200 mm- Control Unit TPA Control Unit (ltalian)- Z Axis Movement 1200 mm- X Axis Movement 360 mm- Long Axis Speed (Z) 70 m/min- Short Axis Speed (X) 30 m/min- Vertical Axis Speed (Y)20 m/min- Lathe RPM 4500 rpm (Direct Drive)- lnstalled Power 20 KW- Lubrication Unit ILC Automatie Lubrication- Piece Clamping Pneumatic Piston (7 Bar)- Piece Length AdjustmentEasy adjustment with remote control (keyless, boltless)- Cutting Blade Hardened Triangle Blade Made of Special Steel- Cutting Blade Hardened Rounded Blade Made Of Special Steel- Cutting Blade Debarker Blade- Spindle Motor ATC (Automatie tool changer) 24000rpm spindle (5 Pcs tool changer)- Drawing Program ltalian Cad-Cam Program Special for Our Machine (Pegasus ...
Weight: 280 kgMotor output: 4 kW: 4000 m³/hThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Filter capacity: 16,3 m²Motor output: 5,5 kW: 5000 m³/hThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
working length: 1000-1600 mmWorking width: 40-150 mmThickness: 10-80 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Панельна пила Тип: HPP 350/43/43 Виробник: Holzma Рік: 2005 Керування: Holzma Cadmatic 4.0 Довжина розрізу: 4300 мм Кількість коллетів: 6 Максимальна швидкість подачі 130 м/хв Звис диска пилки: 85 мм Діаметр диска пилки максимум 350 мм Головний двигун: 12 кВт Попередньо вирізаний Так — налаштування мотора Оптимізація на машині CutPlan 4 Зупинись праворуч Машина в хорошому стані, під приводом живлення Детальніше можна знайти тут - / Зв'яжіться з нами за адресою -
Стрічкова пила Тип: HTZ 1000 Виробник: Mebor Рік: 2003 Довжина різання: 8 м Машина в хорошому стані, під приводом живлення Детальніше можна знайти тут - / Зв'яжіться з нами за адресою -
Центр обробки ЧПУ Тип: c-expres 920 classic Виробник: Format-4 Рік: 2017 Включено: 15 вправ 1x фрезерний різач 1x пила Машина в хорошому стані, повністю функціональна, під приводом живлення Детальніше можна знайти тут - / Зв'яжіться з нами за адресою -
1 € 
