Виробник:
(Категорія: 107)
x-travel: 4000 mmy-travel: 2000 mmz-travel: mm: 4000 bartotal power requirement: 35 kWweight of the machine ca.: tdimensions of the machine ca.: mMicroStep CNC water jet cutting system AquaCut-W 4001.20with the following features:• BFT high pressure pump ECOTRON ® 40.37• Desludging system (scraper conveyor) for a length of 4,000 mm• Water softening using water chemistry1. MicroStep CNC guide machine AquaCut-W 4001.20 (4,000 x 2,000 mm}MicroStep® machine control with MML console and 24 touchscreenTwo LCD operating units on the portalLaser pointer with automatic offset transmissioniMSNC® module / expert systemiMSNC® module / assistant for service and maintenance workiMSNC® module / assistant for loading CNC programsiMSNC ® module / automatic calibration of mechanical scanningiMSNC® module / management of cutting programs (MRP}iMSNC® module / EcolnfoiMSNC® module / machine ...
pressure: 28 tstroke: 180 mmtable-size: 300 x 550 mmdiameter of piston: 130 mmwork speed: min. 2 m/secwork speed: max. 9,8 m/secreturn speed: 20 mm/secMax. pressure: 200 barweight of the machine ca.: 0,65 ttotal power requirement: 4 kWdimensions of the machine ca.: 1,15 x 0,75 x 1,1 m• The horizontal bending and straightening press from Profi Press is a universal one Hydraulic press specially designed for performing bending, profiling and Straightening work is designed. The applications of the machine are different and depend on the accessories that are on the work table, theTool holder and are installed in the holes and pin holes.• The HB-28 model is used for light bending measurements on the work tableequipped with an angle scale, and the press can also be equipped with toolsare supplied (for example block punching) that are placed on the tool holderCan be assembled, as well as to ...
round bar steel: 45 mmsquare edge steel: 40 mmL-beam: 120 x 13 mmflat steel: 500 x 12 mmpunching pressure: 60 tthroat: 510 mm: 500 x 12 oder 400 x 16 mmpunch diameter: 27 in 17 mmpunch diameter: 39 in 12 mmoil volume: 80 ltotal power requirement: 7,5 kWweight of the machine ca.: 2,4 tdimensions of the machine ca.: 1,8 x 0,9 x 1,8 mHydraulic machine with 5 stations so punching, notching, shearing flat iron, angle iron, solid material, punching with hand lever, profile steel side with foot switch. Punching discharge: 510 mm! All performance data refer to a material strength of 450 N / mm².Electric 380 voltThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
tube diameter: 28 mmwall strength: 2 mmbending radius min.: 90 °Control: 3D TubeSoft Slim total power requirement: 3,5 kWweight of the machine ca.: - kgdimensions of the machine ca.: - mmDescription:Round tube steel (S235): 60.0 x 6.0 mmRound tube stainless steel (S 355): 60.0 x 4.0 mmSquare tube steel: 50 x 50 x 4.0 mmRectangular tube steel: 60 x 40 x 2.0 mmmax. usable length: 3048 mmBending speed: 10°/secincluding tools (see photos)Mandrel is no longer available, can be retrofittedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
weight max.: 5,0 tworkpiece diameter: 250 - 2500 mmtotal power requirement: 0,75 kWload capacity drive unit: max. 2500 kgload capacity rotating unit: max. 2500 kgweight of the machine ca.: 0,9 tThe self-adjusting D-HGZ roller blocks adapt to the differentDiameters of your workpieces yourself. This roller block is for specialdesigned for heavy-duty activities. Furthermore, this roller block is forSuitable for thin-walled workpieces, as the four wheels per unit are an improvedSupply pressure distribution. || Features: | - Electronic components ofTop quality | - Infinitely adjustable speed of the drive unit | -Wheels fitted with solid rubber tires enclosed in oneSteel construction | - Heavy construction enables very high stability. | - Favorable price-performance ratio enables quick recoveryYour investment. | - The D-HGZ series is supplied as a standard version andincludes a remote control ...
ширина листа: 2500 ммтовщина пластини: 3 ммвідстань між колонами: 2540 ммзагальна потреба в потужності: 9 кВтвага машини бл.: 5,5 трозміри машини бл.: 3,5 х 3,5 х 2 мNo 5120Поворотний згинальний верстат FASTI 212Робоча зона: 2500 x 3Опора для листів позаду машиниВимога до простору приблизно 4 x 4 (2) x 2 мВага приблизно 5,7 тон
diameter: -- mmworkpiece length: -- mmwork piece width: 0 - 20 mmspeeds: 2850 U/minrange of angles: 0 - 60 (stufenlos) °weight of the machine ca.: 19,5 kgMaximum chamfer width 20 mm + face machiningDesigned for chamfering and deburring straight edges, for theso-called FACING - removing an unwanted layer of material on theFront side of the workpiece, which is created, for example, by flame cutting a sheet metal.Specially developed for the production of visible chamfers andweld preparations. Powerful electric drive for extremeCharges. High performance motor stepless adjustment of the working angle in the range of 0° - 60° FACING - Edge processing at an angle of 0° to remove unwanted onesLayers of material after flame cutting The unique mechanical scale to adjust the bevel width for higherprecision A very compact and ergonomic design for high work productivity Circumferential protective ...
ширина листа: 1015 ммдовжина пластини: 1015 ммтовщина пластини: 6,0 ммПотужність штампування: 25 тДіаметр пуансона: 88,9 ммЗагальна потреба в потужності: 16 кВтвага машини приблизно: 12000 кгРозміри машини приблизно: 4000 х 2320 х 2300 м
plate thickness: 6 mmpressure: 12 tcutting range: Breite x Länge 200 mmno. of strokes: 15 Hub/mincutting angle: 30 - 140 °total power requirement: 4 kWweight of the machine ca.: 1,02 tdimensions of the machine ca.: 1065 x 900 x 1210 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
round bar steel: 50 mmsquare edge steel: 45 mmL-beam: 150 x 14 mmtotal power requirement: 4 kWweight of the machine ca.: 3,5 tdimensions of the machine ca.: 2,3 x 1 x 2,1 mNo. 34185-fold combined profile steel shears with flat steel shearsPEDDINGHAUS 210 Super 16pressure capacity 80 toRound steel 50 mmSquare steel 45 mmangle steel 150 x 14 mmPunching up to 90 mm diameter5.5 HPSpace requirement 2.30 x 1.0 x 2.1 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Максимальна вага: 5,0 тДіаметр деталі: 100 - 2500 ммЗагальна потреба в потужності: 2 x 0,37 кВтвантажопідйомність Привід: макс. 2500 кгвантажопідйомність обертовий блок: макс. 2500 кгшвидкості обертання столу: 100 - 1000 мм/хвДіаметр ходового колеса: 250 х 140 ммВага машини приблизно : 0,9 тВ т.ч. подвійна ножна педаль (старт-стоп / вліво-вправо) В т.ч. пульт дистанційного керування (на кабелі)
Тиск: 32 тХід поршня: 250 ммРозмір столу: 500 x 760 ммРобоча висота Макс.: 925 ммШвидкість згинання: макс. 25 мм/секЄмність бака: 80 лПотужність тиску: 320 барЗагальна потреба в потужності: 5,5 кВтвага машини приблизно: 0,8 тРозміри машини приблизно: 1,3 х 0,5 х 1,3 мМаксимальна висота згинання: 200 ммМаксимальна потужність різання (St): 150 x 14Максимальна потужність (St) 35Висота направляючої: 200 мм
table width: 3000 mmtable length: 1500 mmburner heads: 1 Plasma cutting system HEZINGER PlasmaLine EPJ / ECKERTwith extraction system PFC-4 Plus 4kW F3800The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
I - beam section - flat steel: 140 x 140 x 13 mmI-beam section - upend: 120 x 120 x 13 mmL-beam: 130 x 130 x 12 mmround bar steel: 85 mmbending capacity - flat iron: 125 25 mmflat steel: 65 x 65 mmincluding various rollers:Pipe Ø:219 mm (tool/roller Ø 535 mm)140 mm (tool/roller Ø 420 mm)273 mm (tool/roller Ø 520 mm)203mm168.3 mm (tool/roller Ø 500 mm)75 mm (tool/roller Ø 400 mm)49 mm (tool/roller Ø 420 mm)48.3 mm (tool/roller Ø 420 mm)22.5 mm (tool/roller Ø 420 mm)32/32.5 mm (tool/roller Ø 420 mm)60 mm (tool/roller Ø 420 mm)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
diameter: -- mmworkpiece length: -- mmwork piece width: 0 - 3 mmspeeds: 3600 U/minrange of angles: 30 - 60 (stufenlos) °weight of the machine ca.: 31 kgdimensions of the machine ca.: 530 x 420 x 410 mmMaximum bevel width of 3 mm - Mechanically adjustable bevel angleDesigned for deburring and chamfering steel parts and workpieces.Processing of different materials. Solid and stablemachine construction. Scale for setting the processing depth Security cover Adjustable processing angle For steel, stainless steel, aluminum and other materials Precise, massive and overlong mechanical guide- Number of indexable inserts: 5 pieces (four-sided)- Feed: manualThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 1050 mm: 5,5 mm: 5,0 mmroll diameter: 130 / 195 mm: 2,2 kW: 1050 kg: 2150 x 900 x 1200 mm- 2 central rollers driven by an electric motor- Swing-out upper beam- Conical bending device- separate control panel- self-braking main motor- CE mark/Declaration of ConformitySpecial equipment included in the price:- hardened rollers- Motorized rear roller adjustmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Товщина пластини: 1,2 ммДіаметр рулону: 62 ммГорловина: 100 ммВага машини приблизно : 50 кгРозміри машини Приблизно : 560 х 220 х 500 м
diameter: -- mmworkpiece length: -- mmwork piece width: 18 mmrange of angles: 15° - 50° °weight of the machine ca.: 110 kgChamfering system UZ18 HARDWORKERMaximum bevel width 18 mm with automatic feedThe UZ18 Hardworker machine is one of the most powerful automatic feed beveling machines on the market. It is not only suitable for workshops, but also for on-site assembly. The machine has a stepless working angle adjustment system. Thanks to the special design of the drive system, the UZ18 Hardworker is also suitable for harder materials. The machine is equipped with the automatic feed. Working with UZ18 Hardworker is therefore very convenient.For conventional steel (up to 600 MPA/87022 PSI strength), brass, copper and aluminum materials For chamfering workpieces with the minimum dimensions of 70 x 150 x 6 mm Application range of sheet thickness 6 - 40 mm The bevel angle can be easily a ...
тиск: 26 тпробивний поперечний різ в сммм: 80 х 2,5 хід: - ммзагальна потреба в потужності: 1,5 кВтвага машини бл.: 3 трозміри машини бл.: 3 х 3 х 2,5 мNo 1096: Револьверний діркопробивач 26 до.EDEL, тип SMO 26/660/12 1973 року випуску, глибина горловини 660 ммРобоча зона: діам. 80 х 2,5 ммПотужність приводу: 1,5 кВтАксесуари: 12-станційний магазиндля інструментів Різні пуансони та матриц
angular steel - leg outwards: -- mmdouble T-iron on the x-axis: -- mmU-iron on the x-axis: -- mm: 50 mm: 150 mmthroat: 120 mmtotal power requirement: 1,5 kWweight of the machine ca.: 0,36 tdimensions of the machine ca.: 1,1 x 0,8 x 1,4 mExhibition machine NEW, year of construction: 2021The PB 50-3 is a profile bending machine with manual adjustment of thetoprollervia a handwheel.The profile bending machine can be used in vertical and horizontal working position and are equipped with three driven rollers. The change between two or three driven rollers is done simply by the side handle of the machine.- Manual adjustment of the top roller with a handwheel- Vertical and horizontal work possibility- 3 driven rollers- Supplied with a standard roller set- Foot pedalThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Ріжуча здатність: - ммгорловина: - ммкруглий діаметр заготовки макс.: 500 ммдіаметр круглої заготовки мін.: ? ммзагальна потреба в потужності: кВтвага машини бл.: tрозміри машини к.:
weight max.: 1200 kgworkpiece diameter: 20 - 800 mmtotal power requirement: 0,75 kWtraversing speed: 80 - 1600 mm/minweight of the machine ca.: 56 kgrange L-W-H: 520 x 470 x 390 mm- For machining cylindrical workpieces- Flat frame- Castors with polyurethane coating- Clear controls- Infinitely variable speed- The control electronics are of a robust and closed housingprotected- With foot switch for start/stop- Drive with DC electric motors and gearsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
weight max.: 5000 kgworkpiece diameter: 250 - 2500 mmtotal power requirement: 0,75 kWtable turning speeds: 100 - 1000 mm/mindiameter of running wheel: 250 x 140 mmweight of the machine ca.: 800 kgrange L-W-H: 2200 x 2500 x 800 mm- For machining cylindrical workpieces- Flat frame- Castors with polyurethane coating- Clear controls- Infinitely variable speed- The control electronics are of a robust and closed housingprotected- With foot switch for start/stop- Drive with DC electric motors and gearsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 3100 mmplate thickness: 3 mmrear stop: 1000 mmdown holder: 18 Stkcutting angle: 0.5 - 1,0° 30° °oil volume: 150 ltotal power requirement: 5,5 kWweight: 4300 kgdimensions of the machine ca.: 3800 x 1950 x 1600 mmFurnishing:- electric back gauge 750 mm- front support plates with ball rollers- Light barrier behind the machine- Hydraulic cutting adjustment- Cutting gap regulation via handwheel- LED cutting edge lighting- 1x side stop with scale 1500 mm- 1x freely movable foot switch- Operation manualThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 3100 mmplate thickness: 40 mmpre-bending: 32 diameter of upper rolls: 460 mmdiameter of lower rolls: 420 mmside roll diameter: 360 mmpower capacity: 30 kWmin. bending diameter: 1380 mmweight of the machine ca.: 30,1 tdimensions of the machine ca.: 6,3 x 2,3 x 2,6 m4 Rolls Hydraulic Bending MachineStandard Features:- hardened and polished rolls- complete body made of ST-52 steel- hydraulically opened/closed drop end controlled from control panel - digital readout for side rolls- top and bottom rolls are driven by hydraulic and gearbox. Bottom rolls vertical movements are hydraulic powered- separate control panel- oil cooler - conic bending- in accordance to CE-norm- Warranty 12 monthsOptional Accessories:- variable speed of rotation (5.858,00 Euro)- material feeding table (5.100,00 Euro)- center support (18.750,00 Euro)- 2 x side supports (15.000,00 Euro)The data for this ad ...
ширина листа - макс.: 200 ммтовщина пластини: 6 ммплоска сталь: 70 х 7 ммкруглий пруток сталь: 13 ммвага машини приблизно: 50 кгрозміри машини бл.: 800 х 500 х 1800 м
товщина пластини: 0,8 ммгорловина: 180 ммдіаметр рулону: ммвага машини бл.: 22 кгрозміри машини бл.: 500 х 450 х 160 ммФланцювальний верстат оснащений:- Аварійним вимикачем- Ножний перемикач- 7 шт. Набори ролі
: Вага Hebefix A10 макс.: 10 твага машини аб.: 49 кг (2 штюка) кг:
товщина пластини: 4 ммДіаметр рулону: 125 ммгорловина: 200 ммЗагальна потреба в потужності: 2,2 кВтвага машини бл.: 0,48 тРозміри машини бл.: 1,6 х 0,6 х 1,2 мм • 5 швидкостей• З ножним керуванням• З гальмівним двигуном• З аварійною зупинкою• З гідравлічним регулюванням роликів• З 4 наборами роликі
sheet width: 1070 mmplate thickness: 2,0 mmdistance between columns: 1100 mmdiameter of upper rolls: 76 mmtotal power requirement: Handbetrieben weight of the machine ca.: 0,22 tdimensions of the machine ca.: 1,8 x 0,8 x 1,3 mmSheet bending machine with:- Capacity 1050 x 2 mm- High strength wrought iron rollers with SAE 1050 certificate.- Footswitch- conical bending- Swiveling top roller- Safety device emergency leash- Documentation- 400 volts- CE certificateThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
