ALMI вживана машина для продажу

Тип машини: Машина для надрізання труб Виробник: ALMI Стан: дуже хороший Тип пропозиції: Вживана машина Специфікації: Потужність: 5 розмірів Ø 28 – 61 мм Тип приводу: ел./мех. Силова установка: 2,2 кВт Примітка: Підструктура Вага: 100 кг Машина в дуже хорошому стані та готова до негайного використання, і ми можемо її побачити та продемонструвати. Будемо раді, якщо Вас зацікавить наша пропозиція. Помилки, модифікації та попередній продаж виключені.

Діаметр шліфування: Ø20 - Ø76,1 мм Кут шліфування: 30º – 90º Швидкість стрічки: 30 м/с, 2800 об/хв. Розміри ременя: 100 × 2000 мм Експлуатація: Важільне і ручне управління колесами Рулон в комплекті: Ø48,3 мм Мотор: 3 кВт Країна походження: Нідерланди Машина ДхШхВ: мм Вага машини: 210 кг Ця машина не використовується!

Моторизований трубопровід клінкеру від АЛМІ AL1-2U АЛМІ розробив серію особливо раціональних заклепками труб з електроприводом для від'єднання газу, пари, нержавіючої сталі, нержавіючої сталі, без використання та численних інших труб при інтенсивному використанні. Там, де труби зварюються разом при 90 кут нахилу, АЛМІ вирізані заклепками забезпечити правильну перерву труби дуже швидко і точно. Вони також відмінно підходять для виготовлення двокутових швів. Для інтенсивного використ ...

: neu : ca. 2 - 4 Wochen ab Auftr : Niederlande : 789 € : 22-76 mm : 3 mm : 7 kg The ALU can be used to notch a sink outflow in pipes with an external diameter of 22 mm to 76 mm. Since ALMI pipe notchers have a favourable price and high productivity they are an excellent investment. ALMI pipe notchers are available for cutting out venting slots in round and rectangular met pipes with an external diameter from 27 mm upwards and a wall thickness of a maximum of 3 mm. All the benefits in a nutshell: high productivity, low investments, simple and rapid operation, a number of diameters are immediately available. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 2 Wochen ab Auftragse : Niederlande : 4280 € : 100 x 2.000 mm : 20 - 76,1 mm : 1 : 1 : 3 kW : 220 kg The AL100U-02 can be operated with two hand-wheels or a lever. The machine is equipped with both options. The AL100 U-02 can grind material from Ø 20 mm to Ø 76 mm. The compound slide and carriage with rotatable clamp are continually adjustable, which means the machine can grind all pipe sections at every required angle between 30° and 90°. The ALMI AL100U-02 can be used to grind square, rectangular and round pipes with a range of wall thicknesses and is suitable for all customary types of materials. ALMI’s belt tensioning system makes tensioning the grinding belt even easier. The belt is tensioned using the hexagonal spanner supplied with the machine. The grinding belt can be tensioned quickly and the grinding rollers can be changed in seconds. All pipe grinders are e ...

: neu : ca. 2 - 4 Wochen ab Auftr : Niederlande : 5680 € : 117.58 € : 150 x 2.000 mm : 20 - 114,3 mm : 1 : 1 : 4 kW : 270 kg The AL150 can be operated with two hand-wheels or a lever. The machine is equipped with both options. The AL150 can be used to grind material from Ø 20 mm tot Ø 114.3 mm. The compound slide and carriage with rotatable clamp are continually adjustable, which means the machine can grind all pipe sections at every required angle between 30° and 90°. The ALMI AL150 can be used to grind square, rectangular and round pipes with a range of wall thicknesses and is suitable for all customary types of materials. ALMI’s belt tensioning system makes tensioning the grinding belt even easier. The belt is tensioned using the hexagonal spanner supplied with the machine. The grinding belt can be tensioned quickly and the grinding rollers can be changed in seconds.All pipe ...

: neu : ca. 2 - 4 Wochen ab Auftr : Niederlande : 953 € : 1 1/4, 1 1/2 mm : 3 mm : 15 kg The AL 3 can be used to notch pipes with an external diameter of 42.4 mm (1 1/4”) and Ø48.3 mm (1 1/2”). ALMI products are subjected to stringent quality control inspections before they leave the factory. ALMI’s pipe notcher, in contrast to punch-cutting machines with separate auxiliary tools, is always available for immediate use. Moreover, the price is more affordable than the auxiliary tools for punch-cutting machines. All the benefits in a nutshell: high productivity, low investments, simple and rapid operation, a number of diameters are available immediately, ideal for double corner joints. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 2 - 4 Wochen ab Auftr : Niederlande : 729 € : 3/4, 1, 1 1/4 mm : 3 mm : 8 kg The AL 1 can be used to notch pipes with an external diameter of 26.9 mm (3/4",), 33.7 mm (1",) and 42.4 mm (1 1/4",). The hand-operated machines can be easily wall mounted.With ALMI pipe notchers filing or milling pipes has become a thing of the past. The major benefit of this pipe notcher, compared to other notchers, is that one unit can be used to notch a series of diameters without needing to change parts for each diameter. All the benefits in a nutshell: high productivity, low investments, simple and rapid operation, a number of diameters are available immediately, ideal for double corner joints. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2023 : 5543 : prompt, Zwischenverkauf v : Niederlande : 3660 € : 1 : 100 x 2.000 mm : 20 - 76,1 mm : 1 : 3 kW : 190 kg The lever operated AL100U-01 can grind material from Ø 20 mm to Ø 76.1 mm. Its compound slide and carriage with rotatable clamp are continually adjustable allowing the machine to grind all pipe sections at any angle between 30° and 90°. The ALMI AL100U-01 can be used to grind square, rectangular and round pipes with a range of wall thicknesses and is suitable for all customary types of materials. ALMI’s belt tensioning system simplifies tensioning the grinding belt. The belt is tensioned using the hexagonal spanner supplied with the machine. The grinding belt can be tensioned quickly and the grinding rollers can be changed in seconds. All pipe grinders are equipped with a deburring table. Incl. 5 pcs. grinding belts, 1 pce. grinding roll Ø. 42,4 mm The  ...

: neu : ca. 2 - 4 Wochen ab Auftr : Niederlande : 879 € : 1 1/2, 2 mm : 3 mm : 15 kg The AL 2 can be used to notch pipes with an external diameter of 48.3 mm (1 1/2",) and 60.3 mm (2",). ALMI products are subjected to stringent quality control inspections before they leave the factory. ALMI’s pipe notcher, in contrast to punch-cutting machines with separate auxiliary tools, is always available for immediate use. Moreover, the price is more affordable than the auxiliary tools for punch-cutting machines. All the benefits in a nutshell: high productivity, low investments, simple and rapid operation, a number of diameters are available immediately, ideal for double corner joints. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 2 - 4 Wochen ab Auftr : Niederlande : 6910 € : 143.04 € : 1 : 150 x 2.000 mm : 20 - 114,3 mm : 1 : 1 : 4 kW : 270 kg The new AL150HS 2 in 1 machine: grinding belt and pipe grinder. High Speed Belt thanks to a unique transmission, up to 150ft/per second. The Benefits of the AL150HS: less dust/particules, less change of colour and longer belt life (2 to 3 times) due to high speed. The AL150HS can be operated with two hand-wheels or a lever. The machine is equipped with both options. The AL150HS can be used to grind material from Ø 20 mm tot Ø 114.3 mm. The compound slide and carriage with rotatable clamp are continually adjustable, which means the machine can grind all pipe sections at every required angle between 30° and 90°. The ALMI AL150HS can be used to grind square, rectangular and round pipes with a range of wall thicknesses and is suitable for all customary type ...

Ручний трубний клінкер зробити ALMI типу A 2 для виїмки інструменти 1 = 34,8 ммВикористання ручного важеляВикористання Ціни за запитом. Доставка: колишній склад або місце вільного завантаження вантажівки. Оплата: нетто при поглинанні або за попереднім записом. Технічні дані не є обов'язковими. Помилки за винятком. Ми будемо раді, якщо вам подобається наша пропозиція і завжди доступні для ваших запитів. З найкращими побажаннями. Верстати WaldeckWAHO

: gebraucht : 2019 : 5505 : Niederlande : 2670 € : 1 : 100 x 2.000 mm : 20 - 76,1 mm : 1 : 3 kW : 190 kg The lever operated AL100U-01 can grind material from Ø 20 mm to Ø 76.1 mm. Its compound slide and carriage with rotatable clamp are continually adjustable allowing the machine to grind all pipe sections at any angle between 30° and 90°. The ALMI AL100U-01 can be used to grind square, rectangular and round pipes with a range of wall thicknesses and is suitable for all customary types of materials. ALMI’s belt tensioning system simplifies tensioning the grinding belt. The belt is tensioned using the hexagonal spanner supplied with the machine. The grinding belt can be tensioned quickly and the grinding rollers can be changed in seconds. All pipe grinders are equipped with a deburring table. Incl. 5 pcs. grinding belts, 1 pce. grinding roll Ø. 42,4 mm The data for this ad was c ...

tube diameter: 20 - 114,3 mm engine output: 4 kW grinding band dimension: 150 x 2000 mm Band Speed: 30 prm voltage: 230 oder 400 V weight: 270 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

wall thickness max.: 4 mm : 27 - 61 mm wall thickness: VA 3 mm mm weight of the machine ca.: 7 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 27 / 34,8 / 42,8 /49 / 60 mm : 3/4, 1, 11/4, 11/2, 2 Zoll wall thickness max.: 5 mm wall strength: VA 4 mm voltage: 230 oder 400 V total power requirement: 2,2 kW weight of the machine ca.: 93 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 42,4, 48,3 mm : 1 1/4, 1 1/2 Zoll wall thickness max.: 4 mm wall strength: VA 3 mm weight of the machine ca.: 15 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 48,3 / 60,3 mm : 1 1/2, und 2 Zoll wall thickness max.: 4 mm wall strength: VA 3 mm weight of the machine ca.: 15 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 26,9 / 33,7 / 42,4 mm : 3/4, 1, 1 1/4 Zoll wall thickness max.: 4 mm wall strength: VA 3 mm weight of the machine ca.: 8 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

wall thickness max.: 5 mm wall strength: VA 4 mm : 26,9/33,7/42,4 /48,3/60,3 mm : 3/4, 1,1 1/4, 11/2 ,2 Zoll total power requirement: 2,2 kW voltage: 230 oder 400 V weight of the machine ca.: 87 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tube diameter: 20 - 76,1 mm engine output: 3 kW Band Speed: 30 rpm grinding band dimension: 100 x 2000 mm voltage: 230 oder 400 V dimensions: 1450 x 1150 x 650 mm weight: 190 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tube diameter: 20 . 76,1 mm Band Speed: 30 m/sec engine output: 3 kW grinding band dimension: 100 x 2000 mm voltage: 230 oder 400 V : 2905 U/min dimensions: 1450 x 1150 x 650 mm weight: 210 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tube diameter: 20 - 114,3 mm grinding band dimension: 150 x 2000 mm Band Speed: 45 m/min. voltage: 400 V angle adjustable from - to: 20 - 90 Grad weight: 275 kg The new AL150HS 2 in 1 machine: grinding belt and pipe grinder. High Speed Belt thanks to a unique transmission, up to 150ft/per second. The Benefits of the AL150HS: less dust/particules, less change of colour and longer belt life (2 to 3 times) due to high speed.The AL150HS can be operated with two hand-wheels or a lever. The machine is equipped with both options. The AL150HS can be used to grind material from Ø 20 mm tot Ø 114.3 mm.The compound slide and carriage with rotatable clamp are continually adjustable, which means the machine can grind all pipe sections at every required angle between 30° and 90°.The ALMI AL150HS can be used to grind square, rectangular and round pipes with a range of wall thicknesses and is suitab ...

plate thickness: 5,0 mm tube diameter: 27,9 - 61,0 mm motor: 400 Volt total power requirement: 2,2 kW weight of the machine ca.: 93 kg. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 5,0 mm tube diameter: 27,9 - 61,0 mm motor: 400 Volt total power requirement: 2,2 kW weight of the machine ca.: 87 kg. The advantages at a glance: high productivity, low investment, simple and fast operation, several diameters immediately available and ideal for double corner connections. With the motor-driven pipe notcher AL1-2E you can cut pipes with the Outside diameter Ø 26.9 (3/4?) Ø 33.7 (1?) Ø 42.4 (1_¼ ) Ø 48.3 (1_1 / 2?) and 60.3 (2?) Notch. Furnishing: - for pipes 27.9 - 34.8 - 42.8 - 49.0 and 61.0 mm - Required instructions The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.