tube diameter: 10.0 - 42.0 mm Stahlwall strength: 3.0 mm Stahltube diameter: 54.0 mm CU/Aluwall strength: 2.0 mmbar material - diameter: 30.0 mmrevolutions per minute: 1.30 U/minvoltage: 400 Volttotal power requirement: 1.5 kWweight: 110 kgrange L-W-H: 400 x 450 x 570 mm Exhibition machine - like new never been used () Special price upon request- Steel tube capacity: 42.0 x 3.56 mm- Gas tube capacity: 1 1/4 Gas x 3.5 mm- Square profile capacity (FE 42) 40 x 20 x 2.6 mm- Max. bending radius: 200 mm- Minimum radius: 2 x D- Hexagonal tool holder- Min. outer diameter: 5 mm - 1/8 GasFeatures:- Patented quick tool change system- One bending speed- Digital machine display- 1x freely movable foot switch- 1x bending tool set included Additional segments available upon request for an additional charge ERCOLINA tool holderThe data for this ad was created with ModulMWS - the software solution of Log ...
tube diameter: 33,7 x 3,4 GAS mmtube diameter: 35,0 x 2,5 STAHL mmtube diameter: 35,0 x 1,5 EDELST mmbending radius min.: R10 - R 190 mmbending angle max.: 0 - 180 °tool taper: 6-kant 40 mmvoltage: 230 Vtotal power requirement: 0,9 kWweight of the machine ca.: 23,0 kgDescription:- MediBender 070 digital- with maximum bending performance for 35 x 2.5 mm steel tubes- Excellent bending quality with very tight bending radii. (from 2 x tube diameter) and bending angles between 0° and 180°- Easy to operate- High accuracy and reliability- Fast tool changes (within seconds)- Easy to transport- Huge selection of affordable standard tools (metric, gas inch, inch) BENDING SEGMENT AVAILABLE FOR AN ADDITIONAL CHARGE The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
tube diameter: 1/2 - 2.0 Zollwall strength: 2.75 - 4.5 mm STpressure: 10.0 tweight of the machine ca.: 46.0 kgWith a hinged bending frame for efficient work- Various bending dies included- Universally applicable for gas, boiler, and water pipes- Fast work thanks to rapid feed- With a tripod stand for safe work- Also ideal for copper and coated pipes- Bends up to 90° can be createdFeatures:- Bending dies: ½ - ¾ - 1 - 1 ¼ - 1 ½ - 2The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Діаметр трубки: ? Міцність стінки: ? Радіус вигину мм хв.: ? мм діаметр рулону: приблизно 100 - 240 мм діаметр рулону - діаметр: 60 мм Вага упаковки: 950 кг Упаковка: 1,2 0,8 0,6 м. Дані для цієї реклами були створені за допомогою ModulMWS - програмного рішення компанії LogoTech oHG.
діаметр трубки: 12-54 мм (Kupfer / Edels. ммсерійний номер: EBD 022 99 002 режим роботи: Schneiden / Entgraden / Re швидкість: Rollen 450 Од/хв м/х
tube diameter: 4-20 mmwall strength: 2 mmbending radius min.: 10 mmbending radius max.: 75 mmbending speed: 35 mm/minpull up length of tube: 2000 mmControl: total power requirement: 7,5 kWweight of the machine ca.: 1,1 tdimensions: ca. 3100x1000x1400 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 100 mmroll diameter: 315 mmbending speed: 5 m/minbending capacity - flat iron: max. 12 x 20 mm: 75 mmDrive: 11 kWweight: 2.600 kgrange L-W-H: 1950x1600x2100 mmEquipment / Accessories:- Two driven rollers- Hydraulic delivery of the upper roller- Digital display with memory function- Working position horizontal and vertical- Bearings with tapered roller bearings- Use of replaceable slide rails on the guide carriage- Footswitch- standard roller setThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 60x3 mm: 60x3 mm: 35 mm: 64x4 mm: max. 210 °: R10-R300 bending speed: 1,25/2,5 U/mintotal power requirement: 1,5 kWweight of the machine ca.: 130 kgdimensions of the machine ca.: 595x363x900 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
roll diameter: 350 mm: 110 mmbending speed: 1-5 m/minBending capacity: 157 Wcm³total power requirement: 7,5 kWweight of the machine ca.: 2950 kgDomestic equipments:- Direct drive of all three shafts- Single delivery of the side rollers- Horizontally and vertically usable- Hydraulically movable side rectifier (via control panel)- 2 digital displays for the feed rollers- Hardened rollers- Mobile control panelThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
