Viessmann Tecto RF WMC3 1450 Refrigeration Unit
The Viessmann Tecto RF WMC3 1450 (also known by the series designation
TectoRefrigo) is a state-of-the-art, plug-in piggyback cooling unit
for wall mounting on cold rooms in the field of normal cooling.
Technical data
• Manufacturer: Viessmann Refrigeration Solutions
• Model name: Tecto RF WMC3 1450 (size 2)
• Device type: Plug-in piggyback cooling unit (monobloc) for wall
mounting
• Integrated Bluetooth connectivity (for control via app and data
tracking)
• Automatic leak detection
• Prepared connection cables: 2.5 m for door contact switch and 5 m
Modbus RTU cable (for building management / BMS).
• Application: Normal cooling
• Housing surface: Powder-coated, similar to RAL 9003 (signal
white)
• Cooling capacity at L0L32 (0 °C cell / 32 °C environment): 1450
watts
• Cooling capacity at L0L43 (0 °C cell / 43 °C environment): 1270
watts
• Cold room control range: -5 °C to +10 °C
• For cold room volume: Up to approx. 11.1 m³ to 15 m³ (depending
on the selected insulation, fabric and target temperature)
• Air flow (evaporator): 1000 m³/h
• Permissible ambient temperature: +5 °C to +43 °C (pure indoor
operation)
• Refrigerant: R290 (propane gas) – an environmentally friendly,
natural refrigerant with very low global warming potential (GWP 3)
• Refrigerant capacity: < 150 g
• Global warming potential (GWP): 3
• CO₂ equivalent: < 0.45 t
• Defrosting: Automatic hot gas defrosting with demand-controlled
cycle control
• Condensation: Automatic, integrated condensation evaporation
• Maximum permissible wall thickness: 150 mm (for the hook-in
cut-out)
• Mains connection: 230 V / 50 Hz (alternating current via CEE plug
blue, power consumption approx. 990 W)
• Current consumption (rated current): 5.4 A
• Sound pressure level: 32.8 dB
• Dimensions: 828 mm x 671 mm x 976 mm (H x W x D)
• Weight: 64 kg (net)
Dimensions for the wall cutout
• Width of the neckline: 575 mm
• Height of the cutout: 395 mm
Key features
• Piggyback design: The monobloc unit is simply hooked into a
corresponding section of the cold room wall ("piggyback"). The maximum
wall thickness may be 150 mm.
• Hot gas defrosting: The unit has an automatic, demand-controlled
hot gas defrosting system with integrated condensation evaporation, so
that a separate drain is usually not necessary.
• Smart electronics: Equipped with modern control, Bluetooth
connectivity (for app control and data tracking) and automatic leak
detection.
• Components: Thermostatic expansion valve, pressure sensors and
efficient, internally finned heat exchangers.
Important Operational Instructions
• Ambient temperature: The device is designed exclusively for
operation in closed rooms at an ambient temperature of +5 °C to +43
°C. It has no winter control and is not weather-resistant (no outdoor
installation).
• Accessories for Viessmann cells: If the WMC3 unit is mounted on a
classic Viessmann cold room, a special adapter cable and a converter
box are usually required to connect the door contact switch and the
power supply without errors.
"Everything from a single source: We will be happy to offer you
suitable bank financing for your project."
komplett-konzept.leasingo.de
More items - new and used - can be found in our shop!
International shipping costs on request!
Німеччина
46325 Borken 
