Виробник:
(Категорія: 202)
Trimming machine Make: VITAP Type: RC 92 New machine Technical data: - 2 high frequency motors HP.0,75 (Kw 0.55) each. 12000 RPM, in vertical opposite position with inverter; - 2 cutter heads with cutters one knife straight 15° the other radius 3mm; - CE standards Options (for a surcharge): - Couple of cutters (without knives) ? 274,00 - Set 8 knives 15 degrees angle and radius 2 mms. ? 122,00 - Set 8 knives 15 degrees angle and radius 3 mms. ? 122,00 - Pneumatic lifting of the upper motor ? 474,00 - Optional for panels max. high 120 mms ? 227,00
CNC unit for boring and routing Brand: Atemag Type: Function Line Quattro With four tool interfaces 2x boring / 2x routing Max. drive speed 10,000 R.P.M. Max. tool spindle speed 15,000 R.P.M Gear ratio i = 1:1,5 Turning direction left/right Torque max. 20 Nm Tool interfaces: ER 25, ER 32
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Includes accessories & dust extraction. Auction-ID: A3-43506-5144
• Dovetail machine Serial number 103502 Total installed power 2 KW Maximum workpiece width approx, 250 mm Milling template with 10 notches in each zone Distance between the notches approx, 25 mm Motor power 1,50 KW 8 milling spindles 2 pneumatic clamps • Operating conditions of this machine: unchecked. • Transport dimensions approx. 1200 x 900 x 1200 mm. • This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A7-44536-157
compact tenoning machine with 1 saw spindle and 1 milling spindle, produced in Belgium. Had my last SKH inspection in 2020. - 2 Shafts (saw shaft and milling spindle) - Locking nut for the milling spindle is present and included - Equipped with main switch, motor protection, emergency stops and door sensors - Equipped with adjustable protective caps - Pneumatic clamps - Voltage: 400V Transport dimensions: Length: 2200mm Width: 1500mm Height: 1700mm Auction-ID: A1-41990-75
Vertical head stroke 180 mm Head longitudinal stroke 200 mm Head cross stroke 80 mm Head rotation +/- 45° 2.20 KW Motor Tilting table +/- 45° Operating conditions of this machine: unchecked. Dimensions for transport approx. 1200 x 900 x 2250 mm. This item is delivered loaded on a truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-44536-64
Compact vertongen tenoning machine Equipped with 2 axes: 1 saw spindle and 1 milling spindle Saw shaft: - 400mm saw blade diameter - 30mm bore saw blade - 150mm horizontal displacement - 130(150)mm cutting height Spindle: - 50mm diameter - 440mm usable length - 130mm horizontal displacement - 380mm vertical displacement - 150mm minimum milling diameter - 360mm maximum cutter diameter Transport dimensions: Length: 2650mm Width: 1400mm Height: 2050mm Auction-ID: A1-41990-78
• Spindle moulder • Serial number 1152 • Motor power 5,50 KW • Spindle diameter 50 mm • Table size 1000 x 630 mm • Working height from the floor 850 mm • Maximum tool diameter under table approx, 150 mm • Operating conditions of this machine: unchecked. • Transport dimensions approx. 1200 x 800 x 1300 mm. • This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A7-44536-143
- Serial number 10474. - Maximum installed power 9 KW. - Maximum workpiece length approx. 2400 mm. - Maximum workpiece width approx. 330 mm. - Table for holding the templates. - 6 pneumatic clamping grippers. - 2 milling groups (right-left) with 5.50 KW motors. - Protective fences are included. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-44536-56
max. workpiece length: 4400 mmprofile spindle: 1 Stückmain drive: 19,2 kWControl: Beckhoff CNC machining center MASTERWOOD 4 WIN---------------------------------------------------------Specially designed for a rational and flexible wooden window u.door productionHIGHLIGHTS:- Different tool magazines for optimal tool loading- Simultaneous loading of 4 workpieces- Patented clamping system for optimal processing of the workpieces- CNC controlled work table with automatic positioning of beams andStretcher- Automatic re-clamping for changing between external and internal profiling- INTEGRATED window construction software, i.e. the machine does not have to (but canof course) can be controlled from the office with external industry software.- strong motor with 19.2 kW HSK-63 EPlease note that this stock machine is with us in Oberkochen andis already equipped with many useful options.Tools avai ...
Thanks to its robust cast iron construction, this machine offers maximum stability and precision when milling wood. ⚙️ Features: Industrial toppie / milling machine, Heavy cast iron version, Equipped with adjustable guides, Spindle with intake for various milling heads, Includes protective cover / extraction connection, Powered by powerful 3-phase motor (380V), Placed on pallet for easy transport Condition: FUNCTIONAL working, Complete as shown in the pictures, Including accessories: Various milling knives and cutting plates, Multiple milling heads / mounting elements, Spacer rings and accessories, Wooden storage boxes with contents ️ Application: Milling of profiles and connections, Joinery, windows/doors, furniture construction, Suitable for professional and intensive use Transport: Can be loaded for free by seller Ready for transport on pallet Auction-ID: A3-43501-10677
For sale is a classic Altendorf F 45, equipped with a powerful 5.5 kW main engine and a separate scoring unit (0.75 kW). The machine is ideal for precise cutting in solid wood, plywood and coated panel materials. Thanks to the stable casting table, long sliding carriage and tilting sawing unit, even large-format workpieces can be machined safely and precisely. The condition is very good for its age, the machine is immediately ready for use. Ideal for carpenters, furniture makers or timber construction companies. Auction-ID: 03A-CM0-4
- 4 rotation speeds: 2900/4000/5800/8000 rpm. - With roller feeder. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-44896-9
Дані для цієї реклами були створені за допомогою ModulMWS — програмного рішення LogoTech oHG.
Дані для цієї реклами були створені за допомогою ModulMWS — програмного рішення LogoTech oHG.
Hebrock edge milling machine HFF 08 – built in 2002 Manufacturer: Maschinenbau Hebrock GmbH, Bünde (Germany) Type: HFF 08 Machine No.: 08/330 Year of Make: 2002 Electrical data: 230/400 V 50 Hz 1.5 kW 3.4 A Equipment / Features: • Edge milling machine for machining panel edges • Brush units • Compact design • Extraction connection available • Robust industrial design • Made in Germany Condition: • Used machine • Optically with usual signs of wear • Ideal for workshops or smaller series production Contact Now Kristina Kreimer – Surplex / TBAuctions k.kreimer@tbauctions.com Phone: +49 151 55771219 Auction-ID: 049-HJK-3
Hebrock edge milling machine HFF 08 – built in 2001 Manufacturer: Maschinenbau Hebrock GmbH, Bünde (Germany) Type: HFF 08 Machine No.: 08/278 Year of Make: 2001 Electrical data: 230/400 V 50 Hz 1.5 kW 3.4 A Equipment / Features: • Edge milling machine for machining panel edges • Brush units • Compact design • Extraction connection available • Robust industrial design • Made in Germany Condition: • Used machine • Optically with usual signs of wear • Ideal for workshops or smaller series production Contact Now Kristina Kreimer – Surplex / TBAuctions k.kreimer@tbauctions.com Phone: +49 151 55771219 Auction-ID: 049-HJJ-3
2 UNITS/SETS OF LON0009 PACKED TOGETHER. A SINGLE LON0009 CORRESPONDS TO: Applying to make unprocessed parts of machine, mould shelf which is not easy to move. It is convenient and easy to operate. It is easy to replace stand tungsten steel quadrilateral edge, and can use an old cutter. It is accurate and with perfect surface. The max. chamfering range is 2mm to 3mm everytime. Chamfering angle: 15°- 45°, Speed: 2800rpm, Power: 380V/50HZ/3 phase/550W. Machine condition: unchecked. Approx. Transport dimension: LxWxH 380 x 240 x 245 mm; Approx. Weight: 13kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 2x LON0009 PACKED TOGETHER: 380 x 480 x h245 mm - 26 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: A7-43155-24
10 UNITS/SETS OF LON0018 PACKED TOGETHER. A SINGLE LON0018 CORRESPONDS TO: Pneumatic tool for manual chamfering with a range up to 2-3 millimetres. Chamfering capacity C0.1-C1.5; radius R1.5. No-load rotation speed 3000 rpm, bore 0.1 - 0.9 mm, pneumatic supply 0.4 m³/min, operating pressure 0.6 - 0.8 mpa. Item weight 0.44 kg. Machine condition: unchecked. Approx. Transport dimension: LxWxH 155 x 100 x 60 mm; Approx. Weight: 1kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 10x LON0018 PACKED TOGETHER: 155 x 1000 x h60 mm - 10 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: A7-43155-38
2 UNITS/SETS OF LON0019 PACKED TOGETHER. A SINGLE LON0019 CORRESPONDS TO: Bench linear chamfering machine for angles from 15° to 45°. Height 0-3 mm, power 550 W, 2800 rpm. Item size 535 x 385 x 300 mm, item weight 38 kg Machine condition: unchecked. Approx. Transport dimension: LxWxH 450 x 550 x 300 mm; Approx. Weight: 38kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 2x LON0019 PACKED TOGETHER: 450 x 1100 x h300 mm - 76 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: A7-43155-61
Deckel FP7 NC Milling Machine approx. 7000kg control deckel dialog 3 incl. books Auction-ID: A1-40417-28
Розміри таблиці: 2,400 мм Вихідна потужність двигуна: 5/6 кВт Діаметр пінделя: 30/40 ммреус: 3000/4500/6000/9000 U/хв Вага: близько 1,500 кг: Elektrisch : Elektrisch : Ja : Ja Дані для цієї реклами були створені за допомогою ModulMWS — програмного рішення LogoTech oHG.
Кількість агрегатів: 1 St. Вихід двигуна: 0,37 кВт З'єднана частота навантаження: 230 VЛок, ширина: 6x6 мм Прямокутна свердлильна машина або врізаний верстат Scheppach тип St 12 для свердління або врізання прямокутних отворів для дверей, вікон або подібних застосувань. Дані для цієї реклами були створені за допомогою ModulMWS — програмного рішення LogoTech oHG.
travel -x axis: 500 mmtravel -y axis: 450 mmtravel -z axis: 400 mmc-axis: 360 b-axis: 0 - 108 °surface area: d: 500 x 380 mmcontrol: HEIDENHAIN - iTNC530 number of spindle speeds: 20 - 18.000 U/minnumbers of positions in the tool changer: 60 tool taper: HSK 63 5-axis simultaneous machining center | DMG - DMU 50 eVo linear equipped with NC swivel rotary table, 60-way tool changer, double gripper, ITC (40 bar) and chip conveyor.Additional equipment:- Infrared probing system Heidenhain TS 640- Laser tool measurement system- Belt filter systemThe machine is in a well-maintained condition.Please refer to further technical details in the attachement of the offer.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: DMU50Evo | DMU50 Evo | 50EvoThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
250 € 
