пили б/у для продажу (1,253)

Auction-ID: A1-43823-22

2x adjustable roller stand for sawing machine Auction-ID: A1-43823-221

Equipped with slewing ring Auction-ID: A1-43823-18

Technical data (Velox II / III) Saw blade diameter: 300 mm to 350 mm. Speeds: Very high (typically approx. 1,700 / 3,400 rpm), as it is designed for non-ferrous metals. Cutting range (90° round): approx. 100 mm to 120 mm. Cutting area (90° flat): approx. 180 x 50 mm to 200 x 80 mm. Mitre: Can be swivelled on both sides (usually 45° - 90° - 45°), often with fixed stops. Motor power: approx. 1.5 kW to 2.2 kW.Roller tracks approx. 4000mm Auction-ID: A7-44493-24

Kasto Hack Saw Machine Weight: 500kg Auction-ID: A7-44493-119

Mössner Rekord SV 420 Cutting Capacity: Projection (width): 410 mm to 415 mm. Passage height (max.): 265 mm. Saw blade & rollers: Roll diameter: 420 mm. Saw blade length: 3150 mm to 3260 mm (standard dimension often specified as 3210 mm). Saw band width: 3 mm to 16 mm. Work table: Table size: 600 x 600 mm. Swivel: 15° to 30° to the left and right. Table height: approx. 1020 mm from the floor. Drive & Speed: Cutting speeds: Depending on the model variant, 8 stages (approx. 18–562 m/min) or continuously variable via manual transmission (30–2000 m/min) Auction-ID: A7-44493-51

Table size: 600 mm x 605 Auction-ID: A7-44493-225

Unknown Auction-ID: A7-44493-28

Bergschmid Band Saw Auction-ID: A7-44493-131

: neu : ca. 10 Wochen ab Auftrags : Italien : 9420 €: 181.81 €: Schwenkrahmen : 2450x27x0,9 mm: 35/70 m/min: 220 mm: 200 mm: 250x150 mm: rund 160 mm, quadrat 140 : rund 90 mm, quadrat 90 mm : 800 mm: 0.7 kW: 1330 mm: 1300 mm: 1880 mm: 350 kghydraulicvicesaw beam moves up and down by hydraulic cylinderfast descentutomatic fast up/down conrolled by feeler pinadjustable pressure according to section and type of materialdouble safety buton for cycle start2 speedscoolant equipment_CUTTING CYCLE_Vice locking, Quick bow pull-down hydraulically operated, Blade rotation and cooling liquid start-up,Working pull-down, end of the cutting cycle, Stop of blade rotation and supply of cooling liquid,Quick bow lift-up, Stop of bow upwards movement, vice unlocking if selected.OPTION:Adjustable vice pressure (R1) EUR 403,--The data for this ad was created with ModulMWS - the software solution of Logo ...

saw blade diameter: 350 mmcapacity 90 degrees: round: 120 mmcapacity 90 degrees: square: 110 mmcapacity 90 degrees: flat: 200x88 mmcapacity 45 degrees: round: 115 mmcapacity 45 degrees: square: 110 mmcapacity 45 degrees: square: 150x80 mmtotal power requirement: 1,5/1,8 kWweight of the machine ca.: 0,27 tdimensions: 1,1 x 0,95 x 1,7 m- Hydropneumatic semi-automatic - Miter left/right 45° - head diagonal cuts up to 45° (shifter) - Ball bearing table - pneumatic. Double clamping device - Machine base with fog spray device - Chip extraction socket on the saw blade protective hoodThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Діаметр диска пили: 400 мм Ємність 90 градусів: округлість: 135 мм Ємність 90 градусів: квадрат: 130 мм: 200 x 80 мм Швидкість обертання диска: 12 / 25 м/хв Загальна потужність: кВт вага машини приблизно: 0,75 тРозміри машини приблизно: 1,2 x 0,9 x 1,8 мХолодна циркулярна пила — напівавтоматична — гідравлічне затискання — система охолодження — захисна кришка — в хорошому стані. Дані для цієї реклами були створені за допомогою ModulMWS — програмного рішення LogoTech oHG.

Діаметр ріжу: 260 мм Довжина смуги: 450 x 40 x 2 мм Ємність 60 градусів: квадрат: 240 мм: 260 x 180 Загальна потужність: 2,0/2,6 кВт вага машини приблизно: 1,4 трозміри: 2,1 x 1,7 x 1,0 мДані для цієї реклами були створені за допомогою ModulMWS — програмного рішення LogoTech oHG.

Діаметр ріжу: 320 мм Довжина смуги: 535 x 40 x 2,0 мм Ємність 90 градусів: квадрат: 300 мм Місткість 90 градусів: плоско: ммШвидкість різання: м/мінно. ходів: 45 - 62 - 90 - 125 Загальна потужність: 3,0 кВт вага машини приблизно: 0,35 кг Розміри: 1,4 x 4 x 1,2 м Гідравлічна носова пила з: - Системою охолодження - Аварійним зупинкою Дані для цієї реклами були створені за допомогою ModulMWS — програмного рішення LogoTech oHG.

cutting diameter: 450 mmsaw band length: 6600 x 41 x 1,3 mmtable height: 800 mm: 450 mm: 450 mm: 450 x 270 mmworkpiece weight: 15 - 95 m/min: 7,5 kWwork height max.: 3000 kgconnected load: 3750 x 1400 x 2100 mmControl: NEW PRICE ~ 40.700 EUROvery good conditionSemi-automatic bandsaw, two-column guidedEquipment:- hydraulic vice- infinitely variable cutting speed- chip conveyor- line laser- driven chip brush- coolant device- operating instructionsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 220 mmcapacity 90 degrees: square: 220 x 220 mmturning speed range:: 20 - 140 m/minsaw band length: 3720 x 34 x 1.1 mmheight of material-table: 825 mmcoolant capacity: 80.0 ltotal power requirement: 2.5 / 3.5 kWweight of the machine ca.: 1500 kgrange L-W-H: 2350 x 2050 x 1500 mm- in checked conditions - machinevideo - https://www.youtube.com/watch?v=joc0EbemYC8Equipment:- electro-hydraulic band saw - FULLY AUTOMATIC- for sawing hollow profiles and solid materials made of steel, stainless steel,. tool steel, non-ferrous metals and plastic- control panel on the front right including button for manual operation (setup/individual cut)- electro-hydraulic material clamping- stepless cutting speed .. 20-140 m/min.- electro-motor chip conveyor- manual adjustment of the material feed range via handwheel including analogue value display- automatic height adjustment of the saw fra ...

діаметр різання: 325 мм довжина стрічки пилки: 4200 мм ширина ріжу: 500 мм: 15 - 150 м/хв. максимальна висота роботи: 750 мм. Дані для цієї реклами були створені за допомогою ModulMWS — програмного рішення LogoTech oHG.

Розміри стрічки пилки: 4200 x 34 x 1,1 мм Ємність 90 градусів: кругла: 325 мм Ємність 90 градусів: плоска: 500x300 мм: 300 мм: 300x300 мм: 200 мм: 200x200 мм Вага машини приблизно: 1250 кг Розміри машини приблизно: 2250 x 2100 x 1280 мм Дані для цієї реклами були створені за допомогою ModulMWS — програмного рішення LogoTech oHG.

capacity 90 degrees: round: 260 mmcapacity 90 degrees: square: 260 x 260 mmcapacity 90 degrees: flat: 400 x 260 mm: 250 mm: 240 x 240 mm: 240 x 260 mm: 250 mm: 250 x 250 mm: 290 x 250 mmcapacity 60 degrees: round: 160 mmcapacity 60 degrees: square: 160 x 160 mmcapacity 60 degrees: flat: 110 x 260 mm: 190 mm: 190 x 190 mm: 210 x 190 mmdimensions of the machine ca.: 1700x2000x1600 mmweight of the machine ca.: 960 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Серійний номер: 1106479 : 400 Мітра: ja Охолодження: ja Дані для цієї реклами були створені за допомогою ModulMWS — програмного рішення LogoTech oHG.

cutting diameter: 255 mmdimensions of saw-band: 2750 x 27 x 0,9 mmcutting width: 200 x 320 mmcutting speed: 20 bis 80 m/min: 125 mm: 125 x 125 mm: 195 mmImpact energy: 350 mmconnected load frequency: 400 Volttotal power requirement: 1,5 kWweight of the machine ca.: 290 Kgdimensions: 1,1 x 0,8 x 1,75 mDouble miter band saw-Miter cuts up to 60° left and 45° right-Vice with quick clamping device-Band tension control-Electr. Automatic coolingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 235 mmdimensions of saw-band: 2645 x 27 x 0,9 mmcutting width: 280 x 190 mmcutting speed: 45/90 m/min: 120 mm: 120 mm: 190 mmImpact energy: 170 mmconnected load frequency: 400 Volttotal power requirement: 1,1 kWweight of the machine ca.: 290 Kgdimensions: 1,2 x 0,8 x 1,2 mDouble miter band saw-Miter cuts up to 60° left and 45° right-Vice with quick clamping device-Band tension control-Electr. Automatic coolingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 510 mmcutting diameter: 150 mmcapacity 90 degrees: flat: 450 x 150 mmcapacity 90 degrees: square: 150 mmturning speeds: 29 / 58 m/min.total power requirement: 4,2 kWweight: 1,55 trange L-W-H: 1,8 x 1,7 x 1,7 mmLong-cut cold circular saw, semi-automatic- with miter adjustment left 50°, right 60°- digital cutting angle display- hydraulically adjustable feed speed- hydraulic workpiece clamping- 4 spare saw bladesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 350 mmcapacity 90 degrees: round: 120 mmcapacity 90 degrees: square: 110 mmcapacity 90 degrees: flat: 200x88 mmcapacity 45 degrees: round: 115 mmcapacity 45 degrees: square: 110 mmcapacity 45 degrees: square: 150x80 mmtotal power requirement: 1,5/1,8 kWweight of the machine ca.: 0,59 tdimensions: 1,9 x 1,4 x 1,8 mHydropneumatic Fully Automatic• Mitering Left/Right• Bevel cuts up to 45° (shifter) a. b.• Pneumatic double clamping device• Pneumatic vertical clamping device• Integrated coolant spray systemMPS control:• Save cutting start/end position• Display of power consumption, piece count, cutting time, etc.• Adjustable water cooling• Cutting pressure regulatorThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sawblade width max.: 120 mmWeight: 350 kgMotor output: 1,3 kWWINTER AUTOMATIC BAND SAW GRINDING MACHINE BANDSAWMAX 120 PNK-ABPNK-AB is specially designed for grinding the teeth of various band saw blades used in various forms, width and thickness.Compact and rigid grinding unit moving on linear bearings of PNK-AB machine provides precise and stable grinding.Technical specifications:- Band Saw Width 15-120mm- Tooth pitch Max. 60mm Tooth depth 0-30mm- Tooth forms PV,NV,KV,PU,NU- Hook angle -10° to +30°- Feeding rate 0-90 teeth/min.- Motor quantity 2- Grinding wheel motor – 1.1kW, 1400 r.p.m.- Gearbox motor double-rev. – 0.55kW, 1400 r.p.m- Grinding wheel diameter Ø250mm- Grinding wheel bore diameter Ø20mm- Grinding wheel thickness 8mm/10mm/13mm (depending tooth pitch)- Operating voltage 400V, 3Ph, 50-60Hz- Total power ~1,3kW- Dimensions 80120175cm- Net/gross weight 350/375kgPNK-AB  ...

cutting diameter: 320 mmsaw band length: 3400 x 27 x 0.9 mmcapacity 90 degrees: flat: 320 x 400 mmcapacity 45 degrees: flat: LI 320 x 280 mmcapacity 45 degrees: flat: RE 320 x 260 mmcapacity 60 degrees: flat: RE 320 x 140 mmband speed: 35 + 70 m/minwork height max.: 930 mmvoltage: 400 Vtotal power requirement: 2.67 kWweight: 950 + 250 kgrange L-W-H: - mm well-maintained condition () current new price incl. accessories ~ 40.000 Euro special price on requestEquipment:- electro-hydraulic vertical mitre bandsaw- with large cutting range and small footprint- Robust material support table- miter cuts are carried out fully automatically electro-hydraulic miter adjustment left right- Up to 99 cutting programs- Central operation of all machine functions from the front- Loading also possible from above- Precise positioning thanks to accurate measuring system- electro-hydraulic miter adjustment lef ...

roll diameter: 315 mmthroat: 295 mmworkpiece height: 190 mmMotor Capacity: 0,37/0,8 kWtable-size: 470 x 450 mmsaw band length: 2220 mmcutting speeds: 450 + 900 m/minweight of the machine ca.: 110 kgdimensions of the machine ca.: 640 x 510 x 1600 mmElectric 380 Volt: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 450 mmcutting diameter: 150 mmturning speeds: 6 / 12 / 24 / 48 U/mincapacity 90 degrees: flat: 240 x 70 mmcapacity 60 degrees: flat: 170 x 70 mmcapacity 30 degrees: flat: 120 x 70 mmcapacity 90 degrees: round: 150 mmcapacity 60 degrees: round: 145 mmcapacity 30 degrees: round: 120 mmcapacity 90 degrees: square: 140 x 140 mmcapacity 60 degrees: square: 125 x 125 mm: 100 x 100 mmtotal power requirement: 3,6 kWweight of the machine ca.: 1150 kgdimensions: 1450 x 1610 x 1900 mmSemi-automatic mitre sawEquipment:- miter 30° / 60° / 90°- digital display- roller conveyor- Hydraulic clamping- Hydraulic saw blade feedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Width of the band swa blades: 50-200 mmSharpening pitch: 60 mmWeight: 750 kgWINTER CNC BAND SAW GRINDER BANDSAWMAX PNK-CNCPNK-CNC is designed to grind all types of band saw blades used in metal cutting.PNK-CNC guarantees a flawless, fast and precise grinding of NU, NV, PV, PU, KV, SB tooth forms with its state-of-the-art grinding technologyTechnical specifications:- Band saw width 50-200mm- Band saw length Max. 12m- Blade thickness Min 0.4mm- Tooth pitch Max. 60mm- Tooth depth Max. 30mm- Tooth forms NU, NV, PV, PU, KV, SB Hook angle (0°) (+40°)- Feed rate (speed controlled) Max. 90 teeth/min.- Grinding wheel dimensions D: Ø250mm d:Ø20mm- Grinding wheel thickness 5-13mm (depending on tooth pitch)- CBN Grinding wheel dimensions D: Ø250mm d:Ø20mm- CBN Grinding wheel thickness 2-3mm (depending on tooth pitch)- Grinding wheel rotation (speed controlled) 1400-5500 r.p.m.- Grinding wheel  ...