TRONZADORAS вживана машина для продажу

Тип верстата: алюмінієва пила Виробник: Tronzadoras Тип: TL500A Рік будівництва: 2000 Стан: б/у Пропозиція буде надіслана лише за умови надання повного вихідного коду! Ціна 1.750 євро з ПДВ 19% Мі́сце Варштейн , Німеччина Посилання М-ТРО-1123 ОПИС Пропонуємо вашій увазі алюмінієву пилку б/у від виробника Tronzadoras. - Авт. Канал - Регулювання кута нахилу - Мінімальна кількість мастила Більше фотографій Доступність: відразу Наша пропозиція орієнтована на торговців, які зареєстровані в розумі ...

Key data: 600 mm, 230 mm

Номер складу: 3831 АЛЮМІНІЄВА ШПАРГАЛКА Виробник: TRONZADORAS MG, Тип: TL 600-90 Номер машини: 220309, Рік випуску: 2022 Специфікації: Велика потужність розпилювання 230 мм Ø Велика потужність розпилювання 210 х 210 мм 4-кт. Великий діаметр леза 600 мм Частота обертання лопатей 3000 об/хв Аксесуари: Автоматична подача. Штовхач Autopos 6 Pinon 6000 мм до 40 кг/м Всмоктування стружки MG 570 4кВт Довжина: 1300 мм + 6700 мм, висота: 1660 мм, ширина: 813 мм, вага: 450 кг

saw blade diameter: 650 x 50 mm turning speeds: 3000 U/min : 230 x 230 mm : 400 x 100 mm capacity 90 degrees: round: 250 mm : 190 x 190 mm Capacity 45° rectangular: 260 x 100 mm : 230 mm cutting speed: 55 m/sec. work height max.: 970 mm total power requirement: 4,0 kW weight of the machine ca.: 450 kg dimensions of the machine ca.: 1400 x 820 x 1660 mm Description: Industrial aluminium sawing machine. The machines pneumatic control enables it to saw automatically, with the addition of standard horizontal pneumatic clamps. The sawing machine has an oil nebuliser for better sawing results. The saw feed is adjustable and the machine is supplied with a 500 x 50 mm saw blade. Accessories: - saw blade movement from below - saw blade with corbide teeth - adjustable sawing speed - length stop - lubrication system - air gun - saw blade included The data for this ad was created with ModulMWS -  ...

saw blade diameter: 350x 32 mm turning speeds: 3000 U/min : 115 x 115 mm : 160 x 90 mm capacity 90 degrees: round: 125 mm : 110 x 110 mm Capacity 45° rectangular: 75 x 45 mm : 120 mm Cutting height: 125 mm total power requirement: 1,5 kW weight of the machine ca.: 68 kg dimensions of the machine ca.: 780 x 480 x 850 mm Description: The TL-302-SA is a manual table saw (pneumatic span) with easy safe operation! With this machine, double miter cuts on the right and left are possible up to 45 °. The miter adjustment is done here by turning the stop jaw. The TL-302-SA has a compact design with clear operation. The saw cut is done manually from below into the material to be processed. The material is stretched over two pneumatic clamping cylinders. Furthermore, this model is equipped with a minimal lubrication system and a fixed protection against the cutting area. The data for this ad was ...

saw blade diameter: 600 x 50 mm turning speeds: 3000 U/min : 175 x 175 mm : 300 x 90 mm capacity 90 degrees: round: 220 mm work height max.: 970 mm Cutting height: max. 220 mm total power requirement: 4,1 kW weight of the machine ca.: 650 kg dimensions of the machine ca.: 2020 x 1510 x 975 mm Description: The ALU FRONT-450 is a double bevel machine with a swivel range of 45 ° left and 22.5 ° right and an automatic miter adjustment via stop functions. The saw stroke runs automatically and the material is pneumatically tensioned. The saw blade (450 x 30 mm) runs horizontally! Features: automatic mode Double miter right / left Saw stroke from bottom to top Carbide saw blade Saw speed adjustable length stop air pistol Minimal quantity cooling lubrication including sepia leaf The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 600 x 50 mm turning speeds: 3000 U/min : 175 x 175 mm : 300 x 90 mm capacity 90 degrees: round: 220 mm work height max.: 970 mm Cutting height: max. 200 mm cutting speed: 55 m/sec. Control: total power requirement: 4,1 kW weight of the machine ca.: 650 kg dimensions of the machine ca.: 2020 x 1510 x 975 mm Description: The ALU FRONT-450 is a double bevel machine with a swivel range of 45 ° left and 22.5 ° right and an automatic miter adjustment via stop functions. The saw stroke runs automatically and the material is pneumatically tensioned. The saw blade (450 x 30 mm) runs horizontally! Features: automatic mode Double miter right / left Saw stroke from bottom to top Carbide saw blade Saw speed adjustable length stop air pistol Minimal quantity cooling lubrication including sepia leaf The data for this ad was created with ModulMWS - the software solution of Logo ...

saw blade diameter: 800 x 50 mm turning speeds: 3000 U/min : 245 x 245 mm : 380 x 100 mm capacity 90 degrees: round: 280 mm : 210 x 210 mm Capacity 45° rectangular: 265 x 100 mm : 245 mm cutting speed: 55 m/sec. work height max.: 970 mm Cutting height: max 310 mm total power requirement: 4,0 kW weight of the machine ca.: 590 kg dimensions of the machine ca.: 1500 x 820 x 1700 mm Description: Industrial aluminium sawing machine. The machines pneumatic control enables it to saw automatically, with the addition of standard horizontal pneumatic clamps. The sawing machine has an oil nebuliser for better sawing results. The saw feed is adjustable and the machine is supplied with a 500 x 50 mm saw blade. Accessories: - saw blade movement from below - saw blade with corbide teeth - adjustable sawing speed - length stop - lubrication system - air gun - saw blade included The data for this ad w ...

saw blade diameter: 650 x 50 mm turning speeds: 3000 U/min : 230 x 230 mm : 400 x 100 mm capacity 90 degrees: round: 250 mm cutting speed: 55 m/sec. work height max.: 970 mm Cutting height: 250 mm : 80 db (A) total power requirement: 5,5 kW weight of the machine ca.: 450 kg dimensions of the machine ca.: 820 1300 x 1660 mm Description: Industrial aluminium sawing machine. The machines pneumatic control enables it to saw automatically, with the addition of standard horizontal pneumatic clamps. The sawing machine has an oil nebuliser for better sawing results. The saw feed is adjustable and the machine is supplied with a 500 x 50 mm saw blade. Accessories: - saw blade movement from below - saw blade with corbide teeth - adjustable sawing speed - length stop - lubrication system - air gun - saw blade included The data for this ad was created with ModulMWS - the software solution of LogoTe ...

saw blade diameter: 350 x 32 mm turning speeds: 3000 U/min : 100 x 100 mm : 170 x 60 mm capacity 90 degrees: round: 100 mm work height max.: 970 mm Cutting height: max. 100 mm Control: total power requirement: 1,9 kW weight of the machine ca.: 320 kg dimensions of the machine ca.: 1400 x 850x 970 mm Description: The ALU FRONT-450 is a double bevel machine with a swivel range of 45 ° left and 22.5 ° right and an automatic miter adjustment via stop functions. The saw stroke runs automatically and the material is pneumatically tensioned. The saw blade (450 x 30 mm) runs horizontally! Features: automatic mode Double miter right / left Saw stroke from bottom to top Carbide saw blade Saw speed adjustable length stop air pistol Minimal quantity cooling lubrication including sepia leaf The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 650 x 50 mm turning speeds: 3000 U/min : 230 x 230 mm : 400 x 100 mm capacity 90 degrees: round: 250 mm work height max.: 970 mm Cutting height: max. 250 mm cutting speed: 55 m/sec. total power requirement: 5,6 kW weight of the machine ca.: 720 kg dimensions of the machine ca.: 2020 x 1610 x 975 mm Description: The ALU FRONT-450 is a double bevel machine with a swivel range of 45 ° left and 22.5 ° right and an automatic miter adjustment via stop functions. The saw stroke runs automatically and the material is pneumatically tensioned. The saw blade (450 x 30 mm) runs horizontally! Features: automatic mode Double miter right / left Saw stroke from bottom to top Carbide saw blade Saw speed adjustable length stop air pistol Minimal quantity cooling lubrication including sepia leaf The data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ...

work piece width: 200 mm workpiece height: 100 mm bore diameter: 10 / 20 mm saw blade diameter: 350 x 32 mm turning speeds: 3000 U/min : 100 x 100 mm Capacity 90° rectangular: 170 x 60 mm capacity 90 degrees: round: 100 mm work height max.: 970 mm Cutting height: max. 100 mm total power requirement: 1,9 kW weight of the machine ca.: 260 t dimensions of the machine ca.: 1400 x 850x 970 m Description: The ALU FRONT-450 is a double bevel machine with a swivel range of 45 ° left and 22.5 ° right and an automatic miter adjustment via stop functions. The saw stroke runs automatically and the material is pneumatically tensioned. The saw blade (450 x 30 mm) runs horizontally! Features: automatic mode Double miter right / left Saw stroke from bottom to top Carbide saw blade Saw speed adjustable length stop air pistol Minimal quantity cooling lubrication including sepia leaf The data for thi ...

saw blade diameter: 650 x 50 mm turning speeds: 3000 U/min : 230 x 230 mm : 400 x 100 mm capacity 90 degrees: round: 250 mm work height max.: 970 mm Cutting height: max. 250 mm cutting speed: 55 m/sec. total power requirement: 5,6 kW weight of the machine ca.: 720 kg dimensions of the machine ca.: 2020 x 1610 x 975 mm Description: The ALU FRONT-450 is a double bevel machine with a swivel range of 45 ° left and 22.5 ° right and an automatic miter adjustment via stop functions. The saw stroke runs automatically and the material is pneumatically tensioned. The saw blade (450 x 30 mm) runs horizontally! Features: automatic mode Double miter right / left Saw stroke from bottom to top Carbide saw blade Saw speed adjustable length stop air pistol Minimal quantity cooling lubrication including sepia leaf The data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ...

saw blade diameter: 500 x 50 mm turning speeds: 3000 U/min : 150 x 150 mm : 250 x 75 mm capacity 90 degrees: round: 150 mm work height max.: 970 mm Cutting height: max. 150 mm feed: 700 mm Control: total power requirement: 3,0 kW weight of the machine ca.: 500 kg dimensions of the machine ca.: 2050 x 1150 x 990 mm Description: The ALU FRONT-450 is a double bevel machine with a swivel range of 45 ° left and 22.5 ° right and an automatic miter adjustment via stop functions. The saw stroke runs automatically and the material is pneumatically tensioned. The saw blade (450 x 30 mm) runs horizontally! Features: automatic mode Double miter right / left Saw stroke from bottom to top Carbide saw blade Saw speed adjustable length stop air pistol Minimal quantity cooling lubrication including sepia leaf The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 600 x 50 mm turning speeds: 3000 U/min : 210 x 210 mm : 350 x 110 mm capacity 90 degrees: round: 230 mm cutting speed: 55 m/sec. work height max.: 970 mm total power requirement: 4,0 kW weight of the machine ca.: 450 kg dimensions of the machine ca.: 820 x 1300 x 1660 mm Description: Industrial aluminium sawing machine. The machines pneumatic control enables it to saw automatically, with the addition of standard horizontal pneumatic clamps. The sawing machine has an oil nebuliser for better sawing results. The saw feed is adjustable and the machine is supplied with a 500 x 50 mm saw blade. Accessories: - saw blade movement from below - saw blade with corbide teeth - adjustable sawing speed - length stop - lubrication system - air gun - saw blade included The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 450 x 30 mm turning speeds: 2800 U/min : 130 x 130 mm : 200 x 100 mm capacity 90 degrees: round: 140 mm : 120 x 120 mm Capacity 45° rectangular: 150 x 100 mm : 140 mm cutting speed: 55 m/sec. work height max.: 970 mm Cutting height: max. 148 mm total power requirement: 2,2 kW weight of the machine ca.: 450 kg dimensions of the machine ca.: 1400 x 1000 x 1800 mm Description: The ALU FRONT-450 is a double bevel machine with a swivel range of 45 ° left and 22.5 ° right and an automatic miter adjustment via stop functions. The saw stroke runs automatically and the material is pneumatically tensioned. The saw blade (450 x 30 mm) runs horizontally! Features: automatic mode Double miter right / left Saw stroke from bottom to top Carbide saw blade Saw speed adjustable length stop air pistol Minimal quantity cooling lubrication including sepia leaf The data for this ad w ...

saw blade diameter: 350 x 32 mm turning speeds: 3000 U/min : 100 x 100 mm : 170 x 60 mm capacity 90 degrees: round: 100 mm work height max.: 970 mm Cutting height: max. 100 mm total power requirement: 1,9 kW weight of the machine ca.: 260 kg dimensions of the machine ca.: 1400 x 850x 970 mm Description: The ALU FRONT-450 is a double bevel machine with a swivel range of 45 ° left and 22.5 ° right and an automatic miter adjustment via stop functions. The saw stroke runs automatically and the material is pneumatically tensioned. The saw blade (450 x 30 mm) runs horizontally! Features: automatic mode Double miter right / left Saw stroke from bottom to top Carbide saw blade Saw speed adjustable length stop air pistol Minimal quantity cooling lubrication including sepia leaf The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 500 x 50 mm turning speeds: 3000 U/min : 150 x 150 mm : 250 x 75 mm capacity 90 degrees: round: 150 mm work height max.: 970 mm Cutting height: max. 150 mm total power requirement: 3,0 kW weight of the machine ca.: 450 kg dimensions of the machine ca.: 1950 x 1050 x 970 mm Description: The ALU FRONT-450 is a double bevel machine with a swivel range of 45 ° left and 22.5 ° right and an automatic miter adjustment via stop functions. The saw stroke runs automatically and the material is pneumatically tensioned. The saw blade (450 x 30 mm) runs horizontally! Features: automatic mode Double miter right / left Saw stroke from bottom to top Carbide saw blade Saw speed adjustable length stop air pistol Minimal quantity cooling lubrication including sepia leaf The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 350 x 32 mm turning speeds: 3000 U/min : 110 / mass. 95 mm : 175 x 75 mm capacity 90 degrees: round: 125 mm : 85 / mass. 80 mm Capacity 45° rectangular: 100 x 80 mm : 105 / mass 90 mm total power requirement: 1,5 kW weight of the machine ca.: 180 kg dimensions of the machine ca.: 1200 x 1100 x 1500 mm Industrial aluminium sawing machine. The machines pneumatic control enables it to saw automatically. Work pieces are clamped pneumatically. The sawing machine has an oil nebuliser for better sawing results. With adjustable sawing feed. Accessories: saw blade comes up from below hard metal saw blade sawing speed adjustable length stop air gun lubrication system including saw blade 13.15.1015 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 600 x 50 mm turning speeds: 3000 U/min : 200 x 200 mm : 500 x 50 mm capacity 90 degrees: round: 230 mm : 160 x 160 mm Capacity 45° rectangular: 250 x 100 mm : 230 mm total power requirement: 4,1 kW weight of the machine ca.: 500 kg dimensions of the machine ca.: 1300 x 1220 x 1635 mm Description: Industrial aluminium sawing machine. The machines pneumatic control enables it to saw automatically, with the addition of standard horizontal pneumatic clamps. The sawing machine has an oil nebuliser for better sawing results. The saw feed is adjustable and the machine is supplied with a 500 x 50 mm saw blade. Accessories: - saw blade movement from below - saw blade with corbide teeth - adjustable sawing speed - length stop - lubrication system - air gun - saw blade included The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 500 x 50 mm turning speeds: 3000 U/min : 150 x 150 mass. 95 mm : 300 x 125 mm capacity 90 degrees: round: 180 mass. 95 mm : 120 x 120 / mass. 85 mm Capacity 45° rectangular: 145 x 120 mm : 150 / mass 100 mm total power requirement: 3,0 kW weight of the machine ca.: 430 kg dimensions of the machine ca.: 1200 x 1100 x 1500 mm Description: Industrial aluminium sawing machine. The machines pneumatic control enables it to saw automatically, with the addition of standard horizontal pneumatic clamps. The sawing machine has an oil nebuliser for better sawing results. The saw feed is adjustable and the machine is supplied with a 500 x 50 mm saw blade. Accessories: - saw blade movement from below - saw blade with corbide teeth - adjustable sawing speed - length stop - lubrication system - air gun - saw blade included The data for this ad was created with ModulMWS - the softw ...

saw blade diameter: 350 x 32 mm turning speeds: 3000 U/min : 115 x 115 mm : 160 x 90 mm capacity 90 degrees: round: 125 mm : 110 x 110 mm Capacity 45° rectangular: 175 x 45 mm : 125 mm total power requirement: 1,5 kW weight of the machine ca.: 68 kg dimensions of the machine ca.: 780 x 480 x 850 mm Description: The TL-350-M is a manual circular saw with easy safe operation! With this machine double miter cuts on the right and left up to 45 ° are possible. The miter adjustment is done here by turning the stop jaw. The TL-350-M has a compact design with clear operation. The saw cut is done manually from below into the material to be processed. The material is tensioned manually. Fixed protection from the cutting area. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 300 x 32 mm turning speeds: 3000 U/min : 85 x 85 mm : 120 x 50 mm capacity 90 degrees: round: 100 mass, 75 mm : 60 x 60 mm Capacity 45° rectangular: 75 x 75 mm : 80 mass. 85 mm Cutting height: 100 mm total power requirement: 1,5 kW weight of the machine ca.: 60 kg dimensions of the machine ca.: 700 x 500 x 900 mm Description: The TL-302-SA is a manual table saw (pneumatic span) with easy safe operation! With this machine, double miter cuts on the right and left are possible up to 45 °. The miter adjustment is done here by turning the stop jaw. The TL-302-SA has a compact design with clear operation. The saw cut is done manually from below into the material to be processed. The material is stretched over two pneumatic clamping cylinders. Furthermore, this model is equipped with a minimal lubrication system and a fixed protection against the cutting area. The data f ...

saw blade diameter: 300 x 32 mm turning speeds: 3000 U/min : 85 x 85 mm : 120 x 50 mm capacity 90 degrees: round: 100 mm : 60 x 60 mm Capacity 45° rectangular: 75 x 75 mm : 80 mm total power requirement: 1,5 kW weight of the machine ca.: 60 kg dimensions of the machine ca.: 700 x 500 x 900 mm Description: The TL-350-M is a manual circular saw with easy safe operation! With this machine double miter cuts on the right and left up to 45 ° are possible. The miter adjustment is done here by turning the stop jaw. The TL-350-M has a compact design with clear operation. The saw cut is done manually from below into the material to be processed. The material is tensioned manually. Fixed protection from the cutting area. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 700 x 50 mm turning speeds: 3000 U/min : 250 x 250 mm : 400 x 140 mm capacity 90 degrees: round: 275 mm cutting speed: 55 m/sec. work height max.: 970 mm total power requirement: 5,5 kW weight of the machine ca.: 550 kg dimensions of the machine ca.: 820 x 1400 x 1660 mm Description: Industrial aluminium sawing machine. The machines pneumatic control enables it to saw automatically, with the addition of standard horizontal pneumatic clamps. The sawing machine has an oil nebuliser for better sawing results. The saw feed is adjustable and the machine is supplied with a 500 x 50 mm saw blade. Accessories: - saw blade movement from below - saw blade with corbide teeth - adjustable sawing speed - length stop - lubrication system - air gun - saw blade included The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 400 x 50 mm turning speeds: 3000 U/min : 100 x 110 mm : 250 x 85 mm capacity 90 degrees: round: 130 mm : 110 x 110 mm Capacity 45° rectangular: 160 x 70 mm : 115 / mass. 90 mm work height max.: 970 mm total power requirement: 1,5 kW weight of the machine ca.: 380 kg dimensions of the machine ca.: 900 x 1000 x 1480 mm Basic equipment: ? Double miter 30 ° - 90 ° - 0 °, large support plate, powerful drive motor ? Two-button control to trigger the saw cut (optionally also available as a one-button control) ? Clear control panel ? Two vertical and two horizontal pneumatic clamping cylinders ? Fixed material feed jaw can be moved backwards to increase the cutting performance ? Large protective hood, covers the entire work area ? Minimal lubrication system ? Sheet or cut feed adjustable ? Saw blade ø 400 mm ? Air gun to clean the machine The data for this ad w ...