CONTROLS   CNC controls SIEMENS SINUMERIK 840 C WORKING RANGE -CUBIC-   X-axis travel: 4750 mm   Y-axis travel: 2350 mm   Z-axis travel: 1200 mm PORTAL / BRIDGE   distance between columns: 1640 mm TABLE   table surface (left-right): 4000 mm   table surface (front-back): 1250 mm SPINDLE / HEAD   spindle revolutions (min): 10 /min   spindle revolutions (max): 4000 /min   number of gears: 2   tool fixture: HSK A50 TOOL MAGAZINE   magazin type: cartridge magazine   number of positions: 200   tool diameter max.: 200 mm   tool length max.: 500 mm ...

Unisign Univers 4000 (UV 4000) Şasi CNC Dik İşleme Merkezi Masa boyutu (2) 825 x 625 mm. Palet sayısı: 2 X ekseni hareketi 1600 mm. Y ekseni 600 mm hareket edin. Z ekseni hareketi 500 mm. 4. Eksen (döner tabla) NC Maksimum tabla yükü 600 kg Dergideki alet sayısı 51 adet. Maksimum iş mili hızı 12.000 rpm. Takım tutucu DIN 69871A CNC kontrol Fanuc 21i MB Makine hakkında herhangi bir sorunuz varsa, lütfen telefon veya e-posta yoluyla bizimle iletişime geçmekten çekinmeyin. Envanterimize tam bir genel bakış için diğer reklamlarımıza göz atmaktan çekinmeyin.

Unisign Univers 6 X: 4000 - Y: 800 - Z: 600 mm CNC Longitudinal travel X-axe: 4000 mm Crosstravel Y -axe: 800 mm Travel Z-axe (Height): 600 mm Dimensions clamping space - table: 4100 x 900 mm Max Height of workpiece: 820 mm Power on spindle: 20/26 kW Admission in millingheadspindle (ISO): ISO 50 Max speedrange: 6000 rpm Control: Siemens 840D Power needed: 50 kVa Weight: 24 ton Coolant pump: yes

Description: Attention: The machine is only available from 01.07. and can only be taken over from this date. Machine number 5060 , Including chip conveyor ,  , Attention: without 3-jaw chuck, ,clamping devices and workpieces z-motion: 500 mm, max. workpiece weight between centers: 600 kg, x-motion: 1,600 mm, y-motion: 600 mm, control: SIEMENS SINUMERIK 810 D, table surface area l x w : 855x600 mm, taper: SK 40, toolchanger positions: 51, spindle torque: 100 Nm, turning speed range: 12,000 rpm, rapid motion: 30 m/min, total power requirement: 26 kW, weight approx.: 9,000 kg, Approx. Onsite Dimension. (l x w x h): 5,500 x 2,400 x 3,500 mm

No. 5011: 1 jebr. Magazin cepleri / takım tutucular seti SK 40 Fabr. UNISIGN, Univers 4 için uygun tip, 7 temel tutucu + 10 saklama cebi ile ...

• daha fazla bilgi

x-travel: 1500 mm y-travel: 500 mm z-travel: 400 mm total power requirement: kW weight of the machine ca.: 19 t dimensions of the machine ca.: 6x3,45x3,15 m Brand: Unisign Type: Uniport 4 CNC brand: Siemens CNC model: Sinumerik Year of make: 2005 Table length: 2.200 mm Table width: 1.500 mm Number of pallets: 2 X: 1.500 mm Y: 500 mm Z: 400 mm Machine dimensions: 6.000 x 3.450 x 3.150 mm Machine weight: 19.000 kg 5 Axis The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1600 mm y-travel: 600 mm z-travel: 500 mm total power requirement: kW weight of the machine ca.: 6,5 t dimensions of the machine ca.: m Brand: Unisign Type: UV 4000 CNC brand: Siemens CNC model: Sinumerik 840 D Year of make: 2007 Vertically Table length: 2.500 mm Table width: 600 mm Number of pallets: 1 X: 1.600 mm Y: 600 mm Z: 500 mm Preparation for 4th axis Clamping possibility 4th axis: 1.660 x 200 mm Spindle taper: BT40 Tool changer: 51 Maximum speed: 12.000 RPM Max. workpiece height: 690 mm Chip conveyor Machine weight: 6.500 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This Unisign Unipro 5P Drilling and Vertical Machining center was manufactured in the year 2004 in Netherlands. It is equipped with a Siemens Sinumerik 840D control unit. The machine has a spindle speed of 12000 rpm and a drill pressure of 1300 kN. ...

• daha fazla bilgi

Number of axis: 5, max. rotational speed: 6000/min, pallet dimensions: 1700x1700mm, number of tool slots: 208, connected load: 110kVA, controls: Siemens 840D, weight: 50t, operational hours counter: 60.632h. ...

• daha fazla bilgi

x-travel: 3000 mm y-travel: 2500 mm z-travel: 1000 mm Control: Siemens type: 840 D Feed: 5-30.000 mm/min Table area: 2000x2170 mm table load: 1500 Kg/m² T-slots: 22 H9 distance between uprigths: 2500 mm spindle turning speed range: 6000 U/min spindle drive: 36 kW spindle taper: HSK 100 Tool changer: 30 total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: 8x6,4x4,4 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.