TOP
Seller

Copy Milling Machines DMG MORI TWIN 65

metal çalışma makineleri / delik işleme değirmenleri ve işleme merkezleri /

DMG MORI Used Machines GmbH
[ bayi profili ]

Bayan Kerstin Bauer
Lausitzer Straße 7
82538 Geretsried
Germany

+49 8171 ... Telefon

onaylı
Satıcı

RESALE üye beri 2019

makine listesi (202)

sorgu gönderme

izleme listesine ekle

sorgu gönderme

madde-No: 162958981	miktar: 1	tarih: 27.04.2024
yer: Almanya

fiyat:

Üretici:

DMG MORI

model:

TWIN 65

Makine türü:

Copy Milling Machines

tarif:

Copy Milling Machines DMG MORI TWIN 65

General
Two- Spindle Turning Centre; Control: Sinumerik 840C
Tool holder 2
Shank diametre according to DIN 69880	30 mm
Number of tool stations	12
Number of driven tools	12
Speed max.	-4000 rpm
Power max. (100% DC)	5 kW
Power max. (40% DC)	6,5 kW
Tool holder 1
Number of tool stations	12
Shank diametre according to DIN 69880	30 mm
Number of driven tools	12
Speed max.	-4000 rpm
Power max. (100% DC)	5 kW
Power max. (40% DC)	6,5 kW
Slide 3 (Spindle 2)
Longitudinal stroke	600 mm
Rapid traverse Z	30 m/min
Feed rate torque (100% DC) in Z	700 daN
Slide 2
Longitudinal stroke	555 mm
Transverse stroke	190 mm
Rapid traverse X	20 m/min
Rapid traverse Z	30 m/min
Slide 1
Longitudinal stroke	555 mm
Transverse stroke	190 mm
Y axis, vertical	+/- 40 mm
Rapid traverse in X	20 m/min
Rapid traverse in Z	30 m/min
Rapid traverse in Y	7,5 m/min
Feed rate torque (100% DC) in X/Y/Z	400/700/700 daN
Main drive 2
Type of main drive	AC
Drive power (100% DC)	14 kW
Drive power (40% DC)	18 kW
Speed range	31 - 6300 rpm
Bench speed	1000 rpm
C-Axis Speed	250 rpm
Max. torque (40% DC)	130 Nm
Torque of C-Axis (holding torque)	120 Nm
Input precision of C-axis	0,03 degree
Main drive 1
Type of main drive	AC
Drive power (40% DC)	28 kW
Drive power (100% DC)	21 kW
Speed range	25 - 5000 rpm
Bench speed	850 rpm
Max. torque (40% DC)	320 Nm
C-Axis Speed	250 rpm
Torque of C-Axis (holding torque)	200 Nm
Input precision of C-axis	0,03 degree
Work spindle (right)
Spindle nose	Flat flange
Diametre of spindle nose	140h5 mm
Bar diametre	42 mm
Spindle diametre on front bearing	90 mm
Work spindle (left)
Spindle nose	Flat flange
Diametre of spindle nose	170h5 mm
Bar diametre	65 mm
Spindle diametre on front bearing	120 mm
Working area
Swing diameter over guide ways	240 mm
Turning diameter	200 mm
Distance between spindles	800 mm
Floor space/Weight
Dimensions (L x W x H)	4,8 x 2,25 x 1,95 m
Weight approx.	6500 Kg

Hollow clamping attachment Ø 65, left	hydraulic hollow clamping attachment, inner dia. of draw tube max. Ø66 mm (Ø2.60 in), draw force 45kN (10,116 lbf) at P max. 80 bar (1,160 psi)
Partial hollow clamping device, right	diameter 45 mm (2.6 in), partially hollow 625 mm deep
Chip conveyor	Hinged plate slat type chip conveyor
Coolant supply through the spdl, sub-spdl	coolant supply through the main spindle, for sub spindle
Add. high pressure coolant pump, 20 bar	additional high-pressure coolant pump, additional 300 l (79 gal) tank, p = 30 l/min at 20 bar (7.9 GPM at 290 PSI) including lifting pump and float switch
Adjust. comp. stop in hollow clamp. dev.	adjustable component stop, mounted inside the hollow clamping device
Oil mist extractor, IFS, IFM (1800 m³/h)	oil mist extraction by mechanic industrial filter, IFS, type IFM 1800 m3/h (63570 ft3/h)
Parts catcher for bar components	part collector for bar components
Signal lamp, triple, coloured	Signal lamp, triple, coloured Signal lamp mounted above the machine cover on a vertical pipe. Three operating states of the machine are displayed via the control lamp

seller offer No. resale 160126

Seller-item-No.:

160126

Bu makineyi Facebook'ta paylaşın:

2014	DMG MORI	CTX ECOTURN 650	110000 EUR	[Nov 2019]
2014	DMG MORI	CTX ECOTURN 650	97000 EUR	[Nov 2019]

Copy Milling Machines DMG MORI TWIN 65

soruşturma

daha DMG MORI TWIN 65 + similar DMG MORI-model

fiyat: sold DMG MORI TWIN 65 + benzer DMG MORI-model