Производитель:
(Категория: 107)
Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper -Sheet metal claws -Span: 0 to 40 mm -Load capacity: 9000 kg -Number: 1x terminal available -Weight: 28 kg
Hand lever shears, lever shears, long-blade sheet metal and round steel shears, sheet metal shears, profile steel shears -Manufacturer: Peddinghaus, Lever shear, sheet metal and round steel shear type 3R 4 -Steel sheet: up to 4 mm -Round steel: up to 11 mm -Lift-down device: -Overall dimensions: 295/125/H865 mm -Transport dimensions: 690/125/H310 mm -Weight: 11 kg
: neu : ca. 6 Monate ab Auftragse : Taiwan : 56500 €: 1067.85 €: 3100 mm: 6.5 mm: Hydraulisch : 135 °: 4500 mm: 1750 mm: 2050 mm: 6800 kghydraulic drivenNC control for bending anglemanual back gauge 600 mmsharp rail 45° (in one piece)front angle beam 75 mmmechanical stop adjustment of upper beamclamping force adjustment of upper beamaccording to CE rulesALTERNATIVELY:versionAMH-K,withSECTIONEDsharp rail 45° OPTION:2 axes NC control with 7", touchscreen incl. motorized back gauge 800 mm (sample photos)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Hand lever shears, long-blade sheet metal and round steel shears, lever shears -Manufacturer: Mubea, sheet metal and round steel shears -Cutting insert length: 200 mm -Steel sheet: up to 7 mm -Flat/strip iron: up to 100x9 mm -Round steel: up to 20 mm -Rectangular profile: up to 18x18 mm -Lever arm: with rack and pinion transmission -Overall dimensions: 540/180/H1570 mm -Transport dimensions: 1250/180/H490 mm -Weight: 44 kg
: neu : ca. 6 Monate ab Auftragse : Taiwan : 57500 €: 1086.75 €: 4010 mm: 2 mm: Hydraulisch : 135 °: 5600 mm: 1750 mm: 2050 mm: 4600 kghydraulic drivenNC control for bending anglemanual back gauge 600 mmsharp rail 45° (in one piece)front angle beam 75 mmmechanical stop adjustment of upper beamclamping force adjustment of upper beamaccording to CE rulesALTERNATIVELY:versionAMH-K,withSECTIONEDsharp rail 45° OPTION:2 axes NC control Schneider7", touchscreen incl. motorized back gauge 800 mm (sample photos)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Bending tool, die, lower knife, lower tool, prism tool-Tool for: press brake-Prisms: 90° 12 mm-Drawing: in the photos-Length: 4200 mm (2 x 2100 mm)-Dimension: 20 x 75 mm-Weight: 44 kg
Punching units, punching unit, punching bracket, punching tool, non-driven notching and shearing units, forming bracket-Handover: in the current condition as viewed-Punch bracket: as shown in the pictures-Manufacturer: CEWE-Type: PA50-150-Projection: 150 mm-Dimensions: 275/80/H140 mm-Weight: 10.3 kg
Punching units, punching unit, punching frame, punching tool, non-driven latch and shear units, forming frame-Handover: in the current condition as seen-Die cuts: as shown in the pictures-Manufacturer: SUPRA, type PA8150 with base plate-Punching tool: Ø 4 mm-Dimensions: 275/200/H180 mm-Weight: 21.4 kg
Container rotating device, welding rotating device, roller stand, rotators, pipe straightening system, steady rest -Roller diameter: Ø 80 mm -Roller spacing: 90 mm -Dimensions: 300/100/H118 mm -Weight: 7.7 kg
Sheet metal shears, tin scissors, sheet metal scissors, hydraulic shears -Sheet shear: hydraulic -Cutting width: 2580 mm -Maximum cutting thickness: Steel 2 mm / Aluminum 3 mm -Space requirement: 3020/2000/H1320 mm -Transport dimensions: 3020/2000/1320 mm -Weight: 3185 kg
Punching units, punching unit, punching frame, punching tool, non-driven latch and shear units, forming frame-Handover: in the current condition as seen-Punching frame: as shown in the pictures-Manufacturer: CEWE-Type: PW8-150-Projection: 150 mm-Dimensions: 310/100/H215 mm-Weight: 9.1 kg
Swivel bending machine, edge bench, gutters, roof gutters, beading machine, beading machine-Max. Working width: 1280 mm-Max. Sheet thickness: 1.75 mm-Opening width: 180 mm-Clamping via: threaded spindle-Bending angle adjustable via: stop-Dimensions: 1850/600/H1240 mm-Weight: 380 kg
Hand lever shears, long-blade sheet metal and round steel shears, lever shears -Hand lever shears: Sheet metal and round steel shears -Cutting insert length: 300 mm -Round steel: up to approx. 17 mm -Overall dimensions: 500/145/H1325 mm -Transport dimensions: 1000/145/H450 mm -Weight: 38 kg
2-column punching tool, separating tool, punching tool, punch, punching die, punching stamp, column frame -Manufacturer: Fibro stamping tool column frame -Type: 201.31.056. DIN 9822 C 100x80 -Die stamp: see photos -Dimensions: 340/160/H235 mm -Weight: 23 kg
Beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper, profile steel tongs, plate gripper, lifting claw, lifting clamp -Manufacturer: IP, Safety lifting clamp type IPUNZ with swiveling support ring -Clamping range: 0-32 mm -Load capacity: 6 t -Number: 23 terminals available -Price: per piece -Dimensions: 280/100/H455 mm -Weight: 23 kg/pc.
Die holder, notching tool, punching tool, punch, punch die, punch stamp, -Manufacturer: Mubea, punching tool Ø 60 mm -Type: Mubea 60 5-12 Mount Ø 50 mm -Matrix: Ø 150 mm -Overall dimensions: Ø 150 x 120 mm -Weight: 6.7 kg
Profile steel knife, shearing tool, cutting tool, cutting tool, punching tool, punch, punching die, punching punch-Shearing tool for channel steel: 50 mm-1x dimensions: 140/140/H30 mm-1x dimensions: 135/135/H30 mm-Weight: 8 kg
Punching machine, punching device, hole punching machine, multi-head punch, multi-head punch, punching system -Division: 8 x punch pairs with a spacing of 60 mm (Ø 4 mm) -Distance between the two outer pairs of punches: 975 mm -Spacing: 75 - 165 - 165 - 165 - 165 - 165 - 165 - 75 mm -Max. passage width: 1000 mm -Drive: electric -Weight: 260 kg
Punching units, punching unit, punching bracket, punching tool, non-driven notching and shearing units, forming bracket-Handover: in the current condition as viewed-Punch bracket: as shown in the pictures-Manufacturer: CEWE-Type: PA14-150 2GN1 K27-Projection: 150 mm-Number: 2x punching unit available-Price: per piece-Dimensions: 250/45/H140 mm-Weight: 5.5 kg/piece
Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper -Sheet metal claws -Span: 8 to 25 mm -Load capacity: 2,500 kg -Number: 4x terminals available -Price: per piece -Weight: 12 kg/piece
Separating tool, punching tool, punch, punch die, punch stamp, gill forming tool -Punching tool for: holding dies -Borry hole diameter: 50 mm -Dimensions: 335/220/H180 mm -Weight: 42 kg
Bending tool, die, upper knife, upper tool-Tool: for press brake, 11 pieces-Tool: 60°-Dimensions: 95 x 36 mm-Dimensions: see the drawing in the photos-Total length: 7780mm-Lengths: 8x 835 / 2x 600 / 1x 500 mm-Transport dimension: 835/400/324 mm -Weight: 182 kg
Bending tool, die, upper knife, upper tool, straight tool for press brake-Transfer in current condition as seen-Tool with damage see photos-divided-Tool: 30°-Dimensions: 196 x 26 mm-Total length: 4158 mm-Lengths: 1000/690/557/348/335/307/200/160/125/111/100/100/85/40 mm-Weight: 104 kg
Straightening machine, wire straightening machine, unwinder, straightening machine combination, pay-off reel, wire unwinder, double reel, reel, pay-off reel, motor-driven reel for wire processing, punch, eccentric press, hydraulic press, punching machine, motor reel, winding roll, unwinder, wire unwinder -Wire straightening machine: decoiler-straightener combination -Type:not visible -Note: without documentation -Engine: Fukota 1.5 kW -Straightening rollers: for Ø 20 mm, see photos -Receiving rollers: Ø 152/215 x 1330 mm -Total dimensions: 3040/2450/H2525 mm -Weight: 2080 kg
Die holder, notching tool, punching tool, punch, punching die, punching punch,-Manufacturer: Mubea, punching tool square Ø 70 mm-Type: Mubea 70 5-10 holder Ø 50 mm-Die: Ø 150 mm-Total dimensions: Ø 150 x 120 mm-Weight: 6.6 kg
Hand lever scissors, hand tin snips, tin snips, sheet metal snips -Scissors: 240 x 4 mm -Handover in its current condition as inspected -Dimensions: 400/150/H1200 mm -Weight: 46 kg
Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper-Sheet metal claws-Span width: 10 to 27 mm-Load capacity: 2,500 kg-Number: 1x terminals available-Price: per piece-Weight: 14 kg/piece
Beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper, profile steel tongs, plate gripper, lifting claw, lifting clamp -Manufacturer: IP, Safety lifting clamp type IPUN with swiveling support ring -Clamping range: 0-40 mm -Load capacity: 9 t -Number: 7 terminals available -Price: per piece -Dimensions: 300/110/H470 mm -Weight: 28 kg/pc.
guillotine shears, sheet metal shears, metal sheet shears, crank guillotine shears -mechanical guillotine shears -Cutting width: 2040 mm -max. cutting thickness: 2.0 mm -Equipment: back stop, side stop, 3 supports -Drive: 5.5 kW -Installation dimensions: 2650/1900/H1070 mm -Transport dimensions: 2650/730/H1070 mm -Weight: 1378 kg
Hand lever shears, long-blade sheet metal and round steel shears, lever shears, long-blade sheet metal shears -Manufacturer: Victoria, long-blade sheet metal shears on a mobile base -Cutting insert length: approx. 350 mm -Steel sheet: up to approx. 4 mm -Rectangular profile: up to approx. 7 mm -Overall dimensions: 1030/500/H1900 mm -Weight: 109 kg
