Производитель:
(Категория: 107)
sheet width: 4050 mmplate thickness: 10 mmcolumn arm: 100 mmtable height: 900 mmNumber of hold downs: 21 Stückcutting angle: 2 °total power requirement: 22 kWweight of the machine ca.: 17.100 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper, profile steel gripper, panel gripper, lifting claw, lifting clamp-Manufacturer: ip, sheet metal gripper lifting clamp IPHTONZ-Clamping range: 0 - 30 mm-Load capacity: 0.375 t-Dimensions: 115/80 / H170 mm-Weight: 2 kg
Profile steel knife, shearing tool, cutting tool, cutting tool, punching tool, punch, punching die, punching punch-Shearing tool for square steel: 25/40/50 mm-Shearing tool for round steel: 25/40/55 mm-Type: 4412151064-Type: 4412151063-1x dimensions: 220/206/H30 mm-1x dimensions: 215/205/H30 mm-Weight: 16 kg
Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper -Sheet metal claws -Span: 0 to 20 mm -Load capacity: 1000 kg -Number: 1x terminal available -Weight: 10 kg
Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper -Sheet metal claws -Span: 0 to 20 mm -Load capacity: 1000 kg -Number: 1x terminal available -Price: per piece -Weight: 6 kg
Press brake, bending machine, swing bending machine, die bending machine -Handover: in its current condition as seen, see photos -Condition: upper bending tool has been welded -Manufacturer: LOTZE Swivel bending machine type HDZKE20 -Drive: mechanical -Max. working width: 2000 mm -Max. sheet thickness: 6 mm -Max. intermediate dimension: 235 mm -Connected load: 5.2 kW -Dimensions: 1340/3460/H1400 mm -Weight: 3700 kg
Container turning device, welding turning device, roller stand-Roller stand: wheels Ø 125 x 35 mm-Roller spacing: 140 mm-Quantity: 1 piece available-Dimensions: 350/80/H170 mm-Weight: 6.6 kg
2 columns punching tool, cutting tool, punching tool, punch, punching die, punching die, column frame-Punching tool: 2 columns-Stroke: 40mm-Stamp: without accessories, see photos-Dimensions: 245/240/H240 mm-Weight: 30 kg
Beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper, profile steel gripper, plate gripper-Sheet metal clamp: clamping range up to 85 mm-Load capacity: kg-Dimensions: 300/80 / H330 mm-Weight: 13 kg
Hand lever scissors, hand tin snips, tin snips, sheet metal snips -Shears: 200 mm -Dimensions: 350/100/H710 mm -Weight: 17.6 kg
sheet width - max.: 3035 mmplate thickness: 4.0 mm STplate thickness: 2.5 mm VAplate thickness: 6.0 mm ALUnumber of strokes - loaded: 20 Hübe/mincutting angle: 1.7 °work height max.: 900 mmControl: ELGO total power requirement: 8.5 kWweight of the machine ca.: 4400 kgrange L-W-H: 3416 x 2250 x 1760 mmEquipment:- robust NC electro-hydraulic guillotine shears- NC electro-motorized backgauge with ELGO control unit TYPE 85- Manual cutting gap adjustment- front support table incl. recessed grips- 1x stable side stop, with scale and tilting cam- 3x stable front support arms- 1x freely movable foot switch- front finger guard- Rear metal slide- EMERGENCY OFF button at the front- Operating instructions (PDF)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Stop for press brake, bending machine, guillotine shear, drive shaft -Drive shafts: for stop, from press brake EHT type EHP 11-40, 2 pieces -Length: 515 mm -Hole: Ø 25 mm -Price: complete -Dimensions: Ø 50 x 515 mm -Weight 5.1 kg/pc.
pressure: 80.0 tchamfer lenght: 2570 mmdistance between columns: 2125 mmcolumn arm: 420 mmtable width: 60.0 mmajustment speed: 100 mm/secworking feed: 10.0 mm/secreturn speed: 100 mm/secstroke: 200 mmdayligth: 470 mmtable height: 960 mmNumber of working hours: ~ 33.100 hoil volume: 90.0 ltotal power requirement: 9.0 KWweight of the machine ca.: 5750 kg.range L-W-H: 3630 x 2450 x 2550 mmEquipment:- AMADA CNC control, model OPERATEUR II Manual control for fine adjustment of the axes- CNC control OPERATEUR 2 in 8 axes (X1 X2,Y1 Y2,R1 R2,Z1 Z2)- CNC-controlled backgauge adjustment (X1 X2)- CNC-controlled vertical adjustment of the fence fingers (R1 R2)- CNC-controlled adjustment of the stop fingers left-right (Z1 Z2)- Swivel operation, front left- 1x freely movable foot switch- Top tool holder with top wedge crowning (AMADA system)- Rear safety guard (safety grid)- Side safety guard (safety ...
Bending tool, die, upper knife, upper tool, straight tool, die tool, seam closing tool-Tool: from press brake EHT type EHP 11-40-Measures: see drawing in the photos-Dimension: 4050/45 / H130 mm-Weight: 147 kg
Beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper, profile steel gripper, panel gripper, lifting claw, lifting clamp-Manufacturer: Evers, lifting clamp IPHGZ-Clamping range: 0 - 25 mm-Load capacity: 1.5 t-Dimensions: 200/110 / H300 mm-Weight: 8 kg
Bending tool, die, upper blade, upper tool, deer foot tool, deer foot tool for press brake -Tool for: Press brake -divided -Tool: 82° -Dimensions: 170 x 60 mm -Total length: 2540 mm -Lengths: 20/40/80/160/320/640/1280 mm -Weight: 88 kg
Bending tool, bending tool, die, upper blade, upper tool, straightening tool -Bending tool: Length 1760 mm -Tool angle: 83° -Dimensions: see drawing in the photos -Dimensions: 1760/28/H144 mm -Weight: 44.6 kg
Hand lever shears, hand tin snips, tin snips, sheet metal snips-Scissors: 100 x 5 mm-Dimensions: 280/100/H980 mm-Weight: 10 kg
Section steel shears, profile shears, punch, punching machine, hole punch-Pressure force: 29 to-Punching:-Scissors:-to cut:-not:-mechanical release:-div. Punches and dies:-Length stop:-Installation dimensions: 1300/1570/H1900 mm-Transport dimensions: 1300/770/H1900 mm-Weight: 1112 kg
Beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper-Span width: max. 450 mm-Load capacity: 1,000 kg-Number: 2x available-Price: per piece-Weight: 8 kg
Container turning device, boiler turning device, welding turning device, welding turning device, welding turntable, welding turning device -Container turning device: Welding turning device on rail chassis -Drive motor: 0.55 kW / adjustment motor 0.085 kW -Load capacity: 5000 kg -Roller spacing: 270 - 870 mm, rollers Ø 230 x 150 mm total width -Unwinding speed: 0.025 to 1.0 m/min Right/left rotation, Left rotation only continuous operation -Control unit: with hand control and foot pedal -Rail width: internal dimension 940 mm -Individual components: see photos -Transport dimensions: 1020/1020/H635 mm / 1020/500/H635 mm / 600/480/H955 mm -Total weight: 844 kg
Beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper, profile steel gripper, plate gripper-Sheet metal claw: clamping range up to 30 mm-Load capacity: kg-Dimensions: 250/100 / H460 mm-Weight: 20 kg
Hand lever shears, lever shears, long-blade sheet metal and round steel shears, sheet metal shears, profile steel shears -Manufacturer: Peddinghaus, lever shears, sheet metal and round steel shears -Steel sheet: up to 7 mm -Round steel: up to 20 mm -Rectangular profile: up to 18x18 mm -Lift-down device: -Overall dimensions: 480/210/H1360 mm -Transport dimensions: 1070/210/H470 mm -Weight: 41 kg
Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool-Pipe bending tool: 1 piece-Type: Item No.: 12 00 00 204 RT8-Profile diameter: 25 mm / 1-Dimensions: see photos-Dimensions: 175/140/H82 mm-Weight: 3.8 kg
Beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper, profile steel gripper, plate gripper-Sheet metal claw: clamping range up to 35 mm-Load capacity: 4 t-Dimensions: 230/110 / H450 mm-Weight: 22 kg
Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool-Pipe bending tool: 1 piece-Profile diameter: 47 mm-Mounting: Ø 33 mm-Dimensions: see photos-Dimensions: Ø 125 x 84 mm-Weight: 4.3 kg
Beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper, profile steel gripper, panel gripper, lifting claw, lifting clamp-Manufacturer: ip, safety lifting claw 6 IP-Clamping range: 0 - 40 mm-Load capacity: 6 t-Dimensions: 250/110 / H550 mm-Weight: 26 kg
Bending tool, die, upper knife, upper tool, straight tool-Tool for: press brake-Tool for: closing folds-Recording: 25 mm-Drawing: in the photos-Dimension: 40 x 130 mm-Length: 495 mm-Weight: 12.5 kg
Container rotating device, welding rotating device, roller stand, rotators, pipe straightening system, shaft straightening system -Pipe straightening system for: steel pipes or shafts, flame straightening with water cooling -Drainage channel and water pump -2x: Counter-holder prism -Counter bearing: adjustable -Dimensions: 4000/870/H810 mm -Empty weight: 500 kg
Hand lever scissors, hand tin snips, tin snips, sheet metal snips -Hand lever shears -Material thickness: max. 2 mm -Blade length: 200 mm -Dimensions: 790/540/H1715 mm -Weight: 28 kg
