Weibert SB 4132SM Коробчатое буровое сверло Технические характеристики Мощность двигателя - Вт 1500/2200 400В Глубина сверления в мм 32 Ход шпинделя в мм 120 Держатель сверлильного шпинделя MK4 / MT4 Частота вращения сверлильного шпинделя в мин-1 (24) 60-3480 Диаметр колонны в мм 90 / 2,5 Полная масса в кг 125 GMHM SB4132SM
: 40 mm: M 24 : M 30 spindle turning speed - stepless: 160-2250 U/min: MK 3 spindle stroke: 120 mmthroat: 293 mmcolumn diameter: 115 mm: 515x360 mmdistance spindle /table: min./max. 117/701 mm: 2 x 14 x 224 mmfeed: 0,1 + 0,2 mm/UMachine height: 1840 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
SB163VH Коробчатая колонна Двигатель: 1100 Вт 230 В 50 Гц Размер стола: 356x356 мм Габариты: 740x470x1710 мм Емкость сверления макс. D = 16 мм Максимальный ход шпинделя 150 мм ЖК-дисплей Регулировка частоты вращения Светодиодные Крепление шпинделя MK3 Скорость сверления шпинделя 460-2100 1/мин Остановка глубины бурения Откидная быстросъемная крышка патрона наклонный сверлильный стол +/-45° произвольная регулировка по высоте Сплошная опорная плита Буровая колонна с поверхностью грунта Вес 88,5 кг G&HM-SB163VH-2 ...
: 30 mm: M 16 : M 20 : MK 3 : 225 - 4300 U/min.spindle stroke: 140 mmthroat: 293 mmcolumn diameter: 115 mm: 514 x 360 mm: 2 x 14 x 224 mm: 132 / 724 mmfeed: Hand 0: stufenlos total power requirement: 1,0 / 1,6 kWStandard equipment:- Motor protection switch- Reversing switch for clockwise and anti-clockwise rotation- Speed adjustment stepless- Protection IP 54- Mushroom pushbutton (latching) for EMERGENCY STOP- Spindle protection with electrical protection- Speed display digital- Connector (fully assembled, cable length 2 m)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Ёмкость диаметра стали (диаметр): 40 мм, горло: 345 мм, ход поршня: 220 мм, адаптер инструмента: MK 4, вес машины ab: 400 кг. Данные для этой рекламы были созданы с помощью ModulMWS — программного решения LogoTech oHG.
: 23 mmthreading in St 60: M14 threading in GG 20: M16 : MK 2 spindle stroke: 100 mm: 225-4.300 U/min.throat: 250 mmcolumn diameter: 90 mm: 370x300 mm: 2x14x160 mmdistance spindle /table: min./max. 140/670 mm: Handkurbel feed: von Hand weight of the machine ca.: 180 kgStandard equipment:7 TFT LCD display with touch function: Manual input of spindle speed setpoint, speed display actual value, integrated drilling depth display with touch function.setpoint, actual speed display, integrated drilling depth display with touchzero point transfer, virtual drilling depth scale in the display, machine statusstatus indicators and warnings on the display, Service information, Selectable operator languageoperator language: DE/EN/FR/ES/IT/NL/RU- Thread cutting device, for thread cutting with stop, max. 12 threads/min (thread cutting capacity depends on spindle speed), thread depthadjustable via depth ...
: 12 mm: M12 mm: 30 mm: M 16 : M 20 : MK 3 : 225 - 4300 U/min.spindle stroke: 140 mmthroat: 293 mmcolumn diameter: 115 mm: 514 x 360 mm: 2 x 14 x 224 mm: 132 / 724 mmfeed: Hand 0: stufenlos total power requirement: 1,0 / 1,6 kWweight of the machine ca.: 260 kgStandard equipment:- Motor protection switch- Reversing switch for clockwise and anti-clockwise rotation- Speed adjustment stepless- Protection IP 54- Mushroom pushbutton (latching) for EMERGENCY STOP- Spindle protection with electrical protection- Speed display digital- Connector (fully assembled, cable length 2 m)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 34 mm: 40 mm: 40 mmthreading in St 60: M 24 threading in GG 20: M 30 : MK 4 : 100-1.800 U/min.throat: 300 mm: 615x430 mm: 2 x 14 x 224 mm: 138/688 mmcolumn diameter: 145 mmspindle stroke: 160 mmfeeds: 0,1-0,2-0,3-0,4 mm/Utotal power requirement: 1,4/2,2 kWMachine height: 1865 mmStandard equipment:7 TFT LCD display with touch function: manual input of spindle speedSetpoint, actual speed display, integrated drilling depth display with touchZero point transfer, virtual drilling depth scale in the display, machineStatus displays and warnings in the display, service information, selectableUser language: DE / EN / FR / ES / IT / NL / RU- Thread cutting device, for thread cutting with stop, max. 6thThread / min (thread cutting performance dependent on spindle speed), thread depthadjustable via depth stop and in the TFT - LCD display (4 tools)- Infinitely variable speed setting by means of an ...
: 40 mmthreading in St 60: M24 threading in GG 20: M30 : MK 3 spindle stroke: 120 mm: 80-1.125 U/min.throat: 293 mmcolumn diameter: 115 mm: 514 x 360 mm: 2 x 14 x 224 mmdistance spindle /table: min. 117 / max. 701 mmfeed: 0,1 + 0,2 mm/Uheight of the machine: ca. 1840 mmweight of the machine ca.: 270 kgStandard equipment:- 7 TFT LCD display with touch function: Manual input of spindle speed set value Actual speed display Integrated drilling depth display with touch zero point transfer Virtual drilling depth scale in the display Machine status indicators and warnings on the display Service information Selectable operating language: DE/EN/FR/ES/IT/NL/RU- Thread cutting device, for thread cutting with stop, max. 6thread/min (thread cutting capacity depending on spindle speed), thread depthadjustable via depth stop and on the TFT LCD display (4 tools)- Infinitely variable speed adjustment via ...
: 50 mmbore capacity in cast iron: 56 mm: 50 mm: M 30 : M36 : MK 4 throat: 300 mm: 615x430 mm: 70-4000 U/min.: 2x14x224 mmDistance spindle/table max.: 147/688 mmcolumn diameter: 145 mmspindle stroke: 160 mmfeeds: 0,1-0,4 mm/Uheight of the machine: 1885 mmdrive motor: 1,8/2,9 kWweight of the machine ca.: 530 kgStandard equipment:- Electromagnetic feed clutch with overload protection and electricalCross Handle Switches- Control and light transformer- Main switch lockable- Mushroom pushbutton (latching) for EMERGENCY STOP in the front panel- Clockwise rotation by contactor control- Speed adjustment stepless- Speed display digital- Speed setting electrically- Protection IP 54- Motor insulation class F- Spindle protection with electrical protectionPos. 12LED machine lamp with radially adjustable light beam, supply voltage 24Volt, protection class IP 65Pos. 20.1Tapping device with foot switch, ...
Диаметр корпуса в стали (диаметр): / mmthroat: / mmmm stroke: / mm. Данные для этой рекламы были созданы с помощью ModulMWS — программного решения LogoTech oHG.
Скорость шпинделя: 80-3200 U/мин: 30 мм: 25 мм Площадь поверхности в таблице: 500x365 мм Глубина диаметра цилиндра: 125 мм, горло: 260 мм: MK 3 Расстояние шпиндель/стол: 90-840 ммT-слот — ширина: 14 мм Диаметр столбца: 110 мм вес машины ок.: 270 кгДанные для этой рекламы были созданы с помощью ModulMWS — программного решения LogoTech oHG.
bore capacity in steel St 60: 30 mmbore capacity in cast iron GG 20: 30 mmDrilling capacity in St 60: 30 mmthreading in St 60: M 16 threading in GG 20: M 20 Short spindle: MK 3 spindle stroke: 140 mmthroat: 293 mmcolumn diameter: 115 mmMachine table - usable table surface: 514 x 360 mmT-Slots Amount - Width - Distance: 2 x 14 x 224 mmDistance spindle-table min.: 132 / 724 mmfeed: von Hand spindle turning speed - stepless: 225 - 4300 U/mintotal power requirement: 1,0/1,6 kWweight of the machine ca.: 260 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel St 60: 30 mmbore capacity in cast iron GG 20: 30 mmDrilling capacity in St 60: 30 mmthreading in St 60: M 16 threading in GG 20: M 20 Short spindle: MK 3 spindle stroke: 140 mmthroat: 293 mmcolumn diameter: 115 mmMachine table - usable table surface: 514 x 360 mmT-Slots Amount - Width - Distance: 2 x 14 x 224 mmDistance spindle-table min.: 132 / 724 mmfeed: von Hand spindle turning speed - stepless: 100 - 1.800 U/mintotal power requirement: 1,0/1,6 kWweight of the machine ca.: 260 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 40 mmthreading: bis M 30 throat: 330 mmbore stroke: 180 mm: 4 speeds: 60 - 765 U/mintable-size: 720 x 360 mmtotal power requirement: 2,6 / 3,2 kWweight: 350 kgdimensions: 720 x 1100 x 2050 mmEquipment:- automatic feed- infinitely variable speed- thread cutting device- adjustable drilling depth stop- coolant device- spindle protection- drill chuckThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 40 mmcontinious capacity: 25 mmthroat: 315 mmbore stroke: 200 mmbore depth: 280 mmspindle taper MT: 4 feed range: 0,1-1,5 U/minnumber of feeds: 9 column diameter: ca. 230 mmtable-size: 700 x 600 mmsurface area: 450 x 560 mmdistance spindle/base plate: 1100 mmdimensions: ca. 1000 x 700 x 2400 mmtotal power requirement: 2,6 kWweight of the machine ca.: 1,1 temergency stop switch renewedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 40 mmthroat: 345 mmbore stroke: 180 mmspindle turning speed range: 25-640 U/mincolumn diameter: 180 mmtable-size: Ø ca. 560 mmsurface area: Ø 445 mmfeeds: 0,1, 0,2, 0,3 mm/Uspindle taper MT: 4 weight of the machine ca.: 1 tdimensions: ca. 650 x 1000 x 2100 mmwith thread cutting devicefoot switchWith coolant device in the basesteplessly variable speeds, 2 gear stages, and 2 motor speedsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Диаметр отверстия в стали (диаметр): 16 ммКонус шпинделя: MK 2 скорость вращения: 340 - 2200 U/мин площадь поверхности: 243 x 243 ммХод пера: 90 ммДанные для этого объявления были созданы с помощью ModulMWS - программного решения LogoTech oHG.
Диаметр отверстия в стали (диаметр): 32 ммгорловина: 232 ммХод шпинделя: 150 ммСкорость вращения шпинделя: 115 - 2470 У/мин.Вес станка ок.: 280 кгРазмеры станка ок.: 500 x 950 x 1800 ммДанные для этого объявления были созданы с помощью ModulMWS - программного решения LogoTech oHG.
bore capacity in steel (diameter): . mmthroat: . mmbore stroke: . mmThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): . mmthroat: . mmbore stroke: . mmThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): . mmthroat: . mmbore stroke: . mmThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): . mmthroat: . mmbore stroke: . mmThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
б/у
Диаметр отверстия в стали (диаметр): ммгорловина: 290 ммХод цилиндра: 180 ммОбщая потребляемая мощность: 1,9 кКВес станка ок.: размеры станка прим.: мДанные для этого объявления были созданы с помощью ModulMWS - программного решения LogoTech oHG.
Диаметр отверстия в стали (диаметр): ммГорловина: 290 ммХод стрелы: 160 ммОбщая потребляемая мощность: 1,9 кВтВес машины прибл.: размеры машины прибл.: мОписание будет следующим! Данные для этого объявления были созданы с помощью ModulMWS - программного решения компании LogoTech oHG.
Диаметр отверстия в стали (диаметр): 32 ммгорловина: 290 ммХод цилиндра: 180 ммОбщая потребляемая мощность: 1,9 кВтВес машины прибл.: размеры машины прибл.: мОписание будет следующим! Данные для этого объявления были созданы с помощью ModulMWS - программного решения компании LogoTech oHG.
bore capacity in steel (diameter): 28 mmthroat: 320 mmbore stroke: 150 mmspindle taper MT: 3 MKtable:: 500 x 350 mmcolumn diameter: 105 mmturning speeds: 75 - 3010 U/mintotal power requirement: 0,9 / 1,2 kWweight of the machine ca.: 235 kg.range L-W-H: 1740 x 670 x 850 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 40 mm: M 24 : M 30 spindle turning speed - stepless: 160-2.250 U/min: MK 3 spindle stroke: 120 mmthroat: 293 mmcolumn diameter: 115 mm: 515x360 mmdistance spindle /table: min./max. 117/701 mm: 2 x 14 x 224 mmfeed: 0,1 + 0,2 mm/UMachine height: 1840 mmweight: 270 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 40 mmthroat: 300 mmbore stroke: 180 mmturning speeds: 55-1450 U/minFeed: 0,1-0,3 mm/Ukeyless drill chuck: machine.: Nummer 5112 table surface area: 620x470 mmspindle taper metric: 4 thread cutting attachment: The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 50 mmthroat: 365 mmbore stroke: 230 mmspindle diameter: 60 mmspindle taper: MK 4 spindle turning speed range: 54 - 1032 U/minno. of turning speeds: 9 Stufenfeeds: mm/Utable surface area: 620 x 520 mmtotal power requirement: 3,5 kWweight of the machine ca.: 0,9 tdimensions of the machine ca.: 1,2 x 0,8 x 2,45 mPillar drill with- Left/right rotation- Machine light- Coolant- Emergency stop deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 25 mmthroat: 210 mm: total power requirement: kWweight of the machine ca.: 0.085 trequired space: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Диаметр отверстия по стали (диаметр): 40 ммХод поршня: 190 ммСкорость вращения: 50-1800 Об/минКороткий шпиндель: MK 4 Размеры стола: 500x400 ммОбщая потребляемая мощность: 2,2 кВтВес станка ок.: 330 кгРазмеры станка ок.: 670x500x2120 м
bore capacity in steel (diameter): 40 mmthroat: 330 mmbore stroke: 190 mmspindle taper MT: 4 MKtable:: 500 x 400 mmcolumn diameter: 140 mmturning speeds: 90 - 1500 U/mintotal power requirement: 2,2 kWweight of the machine ca.: 435 kg.range L-W-H: 570 x 930 x 2170 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
