металлообрабатывающие станки / фрезерные станки / Фрезерные станки с круглым столом
Производитель: DMG MORI
Модель:MILLTAP 700
Тип техники: Фрезерные станки с круглым столом
Номер позиции: 167488093
Количество: 1
Дата: 07.12.2025
Местоположение:
Германия
Цена:
Seller-item-No.:065347
| General | |
| Highly productive compact machining centres; Control: Siemens 840D solutionline | |
| Technical Data | |
| Feed rate longitudinal/transverse/vertical | 1-60000/1-60000/1-60000 mm/min |
| Rapid traverse longitudinal/transverse/vertical | 60/60/60 m/min |
| Working area 1 | |
| Longitudinal | 700 mm |
| Cross | 420 mm |
| Vertical | 380 mm |
| Miscellaneous | |
| Clamping System | MAS 403 - 45° |
| Floor space/Weight | |
| Dimensions (L x W x H) | 1,65 x 2,34 x 2,5 (1,65 x 2,95 x 2,55) m |
| Weight approx. | 4100 Kg |
| Spindle speed up to 24,000 r.p.m. BT30 | Spindle 24,000rpm with tool taper BT30 JIS B 6339 (MAS 403-45°) AC-Motor 20 / 4 KW (max. / 100% ED) Watercooling Spindle and Spindle motor via heat exchanger (fan) |
| Table | Table surface 840 x 420 mm |
| Maximum load (table centre) 300 Kg | |
| Slot width 14 mm | |
| Number of Slots 2 | |
| Clamping grid M 12, 100 x 100 mm | |
| Tool clamping for BBT 30 (Big+) | Tool taper BBT 30 - Big+ Pull stud MAS 403 - 45° |
| Tool magazine 25 places | Tool magazine 25 places (suitable for inclusion in the tool spindle) Chip-to-chip time 1.7 sec |
| Nano package | Nano package Improved temperature stability Only combinable with 24,000rpm or 10,000rpm high torque spindle. Without SW-Package Mdynamiks (C-H0020) |
| Production package aluminium band filter ICS 40bar | Production package aluminium Paper band filter ICS 40bar includes: Paper band filter 40bar/ 23l/min Zusatztank 600l Chip conveyor useable for fine aluminium chips (self cleaning slotted filter) Discharge height: 600mm; Tank volume 200l Cabin roof; maschi |
| Automation interface door right | Automation interface inclusive Automation door right and pre- paration Hydraulic interface |
| Special equipment | - Special clamping hydraulics, 2 clamping circuits - Preparation for dividing head EA510 with direct measuring system - Additional control bar for clamping hydraulics on the real machine side - Circulation control |
| Special equipment | RMS-Sensor |
| 2016 | DMG MORI | Milltap 700 | 41900 EUR |
| 2014 | DMG MORI | Milltap 700 | 38900 EUR |
| 2016 | DMG MORI | Milltap 700 | 41900 EUR |
| 2013 | DMG MORI | Milltap 700 | |
| 2018 | DMG MORI | NLX 2500 SY 700 | |
| 2019 | DMG MORI | NLX 2500 SY/700 | |
| 2023 | DMG MORI | NLX2500/700 | |
| DMG MORI | NLX 2500|700 | ||
| 2018 | DMG MORI | NLX 2500 SY / 700 | |
| 2022 | DMG MORI | NLX 2500 Y / 700 |
| 2015 | DMG MORI | Milltap 700 | 90000 EUR | [Mar 2017] |
| 2016 | DMG MORI | Milltap 700 | 54900 EUR | [Jul 2024] |
