металлообрабатывающие станки / фрезерные станки / Фрезерные станки с круглым столом
Производитель: DMG MORI
Модель:DMU 50
Тип техники: Фрезерные станки с круглым столом
Номер позиции: 170270955
Количество: 1
Дата: 02.10.2026
Местоположение:
Германия
Цена:
Seller-item-No.:011242
| General | |
| Universal Milling Machine; Control: CELOS with Heidenhain TNC 640 | |
| Working area 1 | |
| Longitudinal | 650 mm |
| Cross | 520 mm |
| Vertical | 475 mm |
| Technical Data | |
| Type of main drive | AC |
| Drive power (100% DC) | 25 kW |
| Drive power (40% DC) | 35 kW |
| Speed range | 20 - 20000 rpm |
| Spindle taper | SK40 Tool holder DIN ISO 7388-1-A |
| Clamping System | DIN ISO 7388-3-A, AD |
| Feed rate longitudinal/transverse/vertical | -42000/-42000/-42000 mm/min |
| Rapid traverse longitudinal/transverse/vertical | 42/42/42 m/min |
| Floor space/Weight | |
| Dimensions (L x W x H) | 2,85 x 2,35 x 2,75 m |
| Weight approx. | 7500 Kg |
| Direct measuring system | Direct path measuring system |
| Spindle speed 20,000 rpm | Motor spindle speedMASTER® SK 40 Spindle speed 20 - 20,000 min-1 At speed 18.000-20.000 min-1 SK40 – BIG-PLUS® stipulated Output 35 kW / 25 kW (47 hp / 33.5 hp) Torque 130 Nm / 86 Nm (96 ft lbs / 63.5 ft lbs) (40 / 100 % duty cycle) |
| NC swivel rotary table | Swivel Rotary Table for simultaneous machining Clamping surface dia. 630 x 500mm / 24.8 x 19.6 in swivel range -35 to +110°, rotary axis 360° including direct measuring system for B- and C-axis and working plane transformation |
| Reduced table plate swivel rotary table | Reduced table plate for swivel rotary table Clamping surface D 505x500 mm / 19.8x19.6 in |
| Tool magazin 120 pockets | Tool magazine 120 places SK40 Vertical chain with double gripper incl. set up station for tool loading |
| Swarf conveyor, with cleaned slot screen | Swarf conveyor, scraper type with cleaned slot screen |
| Internal Coolant Supply 80bar/980l frequency control | Internal coolant supply for spindle ICS with paper type filter Papertype-Filter 20 - 80 Bar // 290 -1160 psi frequency controlled 980-l tank // 25 / 17 l/min/ 258.9 gallon tank 6.6 /4.5 gallon/min incl. cabin roof, rotary joint in spindle, double cartridg |
| Coolant-air blast change-over | Coolant - Air-blast changeover external switchable via M-Function |
| Air blast through spindle centre | Air blast through spindle centre activated by M function, maintained air with low oil rate |
| Chip flushing for working area | Chip flushing for working area rinsing line on the right side panel, backside of machine bed, cabin left and right activated or deactivate by M function's (only in combination with internal coolant supply, not with 20 bar ICS) |
| Double cartridge filter, 25 µm | Double cartridge filter, Finesse of filtration 25 µm, manually reversible (only in connection with separate paper-type filter) |
| Rotating clear-view window | Rotating clear-view window (only available with option cabin roof) |
| Oil- and emulsion mist separator mechanical | Oil and emulsion mist separator mechanical filter system 1100 m³/h (only available with option cabin roof) |
| Signal lamp 4-colour | Signal lamp, 4 colours |
| Customized actuation of clamping system | Customized actuation of clamping system clarification with technical sales stringently required! |
| Automation Interface WH CELL / Robo2Go | Automation interface WH CELL / WH FLEX / Robo2Go Interface (Profibus) via M65 Automatic loading door Working table with 4-channel rotary joint Only in combination with an additional clamping method option! For Robo2Go this option is only available for CEL |
| Coolant unit for electrical cabinet | Cooling unit for electrical cabinet recommended for ambient temperatures above 35 °C up to a maximum of 50 °C |
| Operation mode 4 | Operation mode 4 "Process monitoring in the production" Manual intervention with open doors of machining area. Release after check list has been filled in. |
| 3D data model | 3D data model in STEP format for integration in CAD System by the customer. It is used for machine simulation. (shipping against signed non disclosure agreement) |
| Digital Manufacturing Package | Digital Manufacturing Package (1) IoTconnector Allows the use of the Online services from DMG MORI (2) Machine Data Connector (MDC) Standardized machine data interface Protocols: OPCUA, MTConnect, MQTT (3) NETservice Qualified support through internet-b |
| Messenger V4 | The latest version of DMG MORI Messenger displays web based the machine live status. It allows to analyze the machine run-time, downtime, alarms in individually configurable dashboards and transparently shows the actual status in the manufacturing shop |
| Service Agent | Service Agent Overview of all maintenance work on the machine |
| Special equipment | Clamping pneumatics 1 clamping circuit with clamping pressure increase 8.5 bar Probe PP400 incl. probe tip Tool breakage detection TRS2 Preparation 3D quickSET 3D model Customer-side control of the clamping system INTERNAL SK: Alterna |
