подкатегории
(уровень третий категории)
Производитель:
(Категория: 109)
live center, live center point, live Morse taper, live center point, live lathe center, center point, centering taper -Traversing centering tip: MK5 mount, 2 pieces -Type: 1x without type designation / 1x IAMU-BLAJ-CM5-STAS-7628-74 -Price/Fee: complete -Transport dimensions: 267/180/H90 mm -Total weight: 7.6 kg
Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws-Top jaws: Jaw set for three-jaw lathe chucks-Jaw width: 22 mm-Dimensions: see photo technical. drawing-Total dimensions: 75/67/H58 mm -Total weight: 1.9 kg
Thread cutter, thread cutting machine, thread drilling machine -Integrated reversing gearbox: with rapid return -Nominal input: 230 watts -Max. cutting capacity: M6 -Connection: 230 volts -Weight: 2.5 kg
Counter holder, counter bearing, bearing block, pillow block, bearing for milling machine-Dovetail: 315 by 255 mm 40 mm high-Drawing: in the photos-Number: 2x counter bearings available-Price: per piece-Dimensions: 560/200/H285 mm-Weight: 20 kg
Tool holder, milling holder, collet holder, milling tool, adapter, clamping unit, tool holder,-Manufacturer: Sandvik Coromant milling holder SK45-Type: 390.140-45 50 027-Dimension: O83 x 140 mm-Weight: 1.7 kg
Clamping angle for workpiece clamping, eccentric press-The clamping angle comes from: an eccentric press-Manufacturer Heilbonn Type: REPV60-Clamping surface: 600 x 720 mm-Plate thickness: 75 mm-Groove: mm-Surface: milled-Dimensions: 735/900/H545 mm-Weight: 532 kg
Face plate, face plate chuck, four-jaw chuck, facing chuck -Chuck size: Ø 600 mm -Through hole: Ø 136 mm -Hole circle: Ø 170 mm -Weight: 111 kg
Machine vice, stable vice, milling machine vice, modular vice-Manufacturer: Gerardi, Modular Vice-Jaw width: 195 mm-Back height: 60 mm-Clamping range: 450 mm-Dimensions: 695/195/H130 mm-Weight: 70 kg
Tubular heater, heating tape, heating sleeve, mica heater, cylinder heater, heating cylinder, ceramic heating tape -Manufacturer: Erge, heating tape, heating sleeve -Type: Ø56 x 25 mm -Item No.: 814 682 65 -Heating power: 215 W -Voltage: 220 V -Quantity: 2x heating tape available -Price: per piece -Dimensions: 130/130/H60 mm -Weight: 0.2 kg
Tapping chuck, tapping chuck, tapping chuck, milling tool, tapping attachment-Tapping chuck: Mount MK2-Type: GH 20 MK2-Bore: Ø 16 mm-Dimension: Ø 67 x 186 mm-Weight: 1.9 kg
Clamping plate, welding table, welding table, straightening plate-Steel table-Length: 2200 mm-Width: 1255 mm-Height: 705 mm-Panel thickness: 69 mm-Weight: 1396 kg
Fixators, leveling units, leveling elements, machine foot, machine feet, leveling shoes, machine foundation, leveling shoe, wedge shoe, machine support, leveling foot, spring elements -Spring element: for machine tools and systems Ø 150 mm -Mounting hole: M16 -Quantity: 1 piece available -Dimensions: Ø 150 x 40 mm -Weight: 1.1 kg/piece
Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck-Chuck size: Ø 250 mm-Throughout: Ø 80 mm-Weight: 24.5 kg
fixed point, fixed center point, fixed morse taper, fixed centering point, centering points-Take: Morse taper MK6-Dimensions: Ø 70/250 mm-Weight: 5.6 kg
drying oven, drying cabinet, chamber dryer oven, warming oven, heating chamber, drying oven, drying cabinet, drying and warming cabinet -Manufacturer: MLW, drying cabinet type WSU102 -Usable space: WHD 500x420x435 mm -Heating power: 2.16 kW -Nominal temperature: 320°C -Individual components: see photos -Dimensions: 630/1000/H840 mm -Weight: 118 kg
Clamping plate with T-slots and cross table, plate field, welding table, welding table, plate boring machine, T-slot plate-T-grooved plate comes from: from a milling machine-Travel: approx. 1200 mm-Width: 700 mm-Length: 2000 mm-Height: 510 mm-Plate thickness: mm-Table height: mm-Plate: is solid-Groove width: mm-Dimensions: 3030/850/H510 mm-Weight: approx. 1200 kg
marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube, prism block-Marking prism: for marking plate, clamping plate, straightening bench ...-Dimensions: 150/75/H130 mm-Weight: 4.8 kg
Face plate, face plate chuck, four-jaw chuck, facing chuck -Chuck size: Ø 400 mm -Through hole: Ø 28 mm -Recording: approx M77 x 6 -Weight: 41 kg
live center, live center, live morse taper, live center, live lathe center, live center, centering cone-Manufacturer: Röhm / unknown, rotating centering points 3 pieces-Type: Röhm 110HVL MK5 / 2x without type designation-Recording: MK5-Price/Delivery: complete-Transport dimensions: 280/270/H95 mm-Total weight: 14.3 kg
Tailstock, counter bearing for dividing head, dividing attachment-Tailstock comes: from a Ramo a42 lathe-Quill: electrically driven-Motor: 220/380 V 0.18 kW-Spindle stroke: 300 mm-Recording: MK4-Dimensions: 790/550/H580 mm-Weight: 98 kg
Clamping plate, unit carrier, milled surface, welding table, welding table -Width of the table surface: 494 mm -Length of the clamping surface: 2925 mm -Height of table surface: 447 mm -Working height: 447 mm -Transport dimensions: 2925/494/H447 mm -Weight: 564 kg
Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange: for three-jaw chucks, four-jaw chucks, face plates -Outside: Ø 235 mm -Cone: 106 mm -Hole circle: Ø 135 mm -Number: 2x discs available -Price: complete -Weight: 14 kg
cutter head, milling holder, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell milling cutter, face milling cutter, corner milling cutter-Manufacturer: Gewefa Sandvik Coromant, face milling cutter head 5 pieces-Type: 1x Ø100 / 2x Ø125 / 2x Ø160 mm different versions, see photos-Adapter: SK50x40x40-Delivery/Price: complete-Transport dimensions. 280/270/H230mm-Weight: 40 kg
Thread cutting machine, pipe thread cutter -for: Pipe size max. 2 inches -Cutting jaws: 1 inch -Drive: via 3 gearboxes -Dimensions: 550/360/H240 mm -Weight: 60 kg
Turning tool with indexable cutting jaws, clamping holder, turning tool, indexable insert holder, turning tool, indexable insert tool -Dimensions: 150/25/H25 mm -Weight: 1 kg
Tool holder, milling holder, milling tool-Adapter-Adjustment: SK50-Tool holder: Ø 32 mm-Number: 2x recordings available-Sale: only complete-Total length: mm-Weight: 6.5 kg
Multi-wedge broach, hexagonal broaching tool, broaching tool, broach, special tool, grooving tool, grooving machine, slotting machine, slotting machine, slotting tool, slotting broach -Manufacturer: SWZ, broach, impact broach -Type: SW 19 1TGL 29-16600/02 20/50 HSS -Item no.: 440 0432 08 102 04708 -Width: Hexagonal 19 mm wrench width, see photos -Quantity: 1 piece available -Total dimensions: 950/22/22 mm -Weight: 1.7kg
Chuck flange, flange mount, lathe chuck flange, drive flange -Muck flange: for three-jaw chucks, four-jaw chucks, faceplates -Outer diameter: Ø 380 mm -Inner diameter: 103 mm -Mount: Cone Ø 135 mm -Bolt circle: Ø 170 mm/M16 -Bolt circle: Ø 335 mm/M24 -Dimensions: Ø 380 x 105 mm -Weight: 37 kg
Boring head, spindle head, drill head, grooving head, grooving head, spindle drilling head, boring head, spindle tool, peeling drill, cutting head-Slicing drill: drill head cutting head with coolant device-Drill diameter: 70mm-Intake: MK5-Dimensions: 825/65/70 mm-Weight: 18 kg
Fixators, leveling units, leveling elements, machine foot, machine feet, leveling shoes, machine foundation, leveling shoe, wedge shoe, machine support, leveling foot, spring elements -Spring element: for machine tools and systems Ø 150 mm -Mounting hole: M10 -Quantity: 1 piece available -Dimensions: Ø 150 x 43 mm -Weight: 1.1 kg/piece
