подкатегории
(уровень третий категории)
Производитель:
(Категория: 109)
rotary table, rotary indexing table, dividing apparatus, dividing head, dividing disk-Dividing disc: for rotary table/dividing apparatus 2 pieces-Outside: Ø 125 mm,-Inside: Ø 35 mm-Circle: 33/38/39/42/46 holes-Delivery/Price: complete-Dimensions: Ø 125 x 6 mm-Weight: 0.5 kg/piece
Thread cutting head with Strehler jaws, thread cutting die, Thread cutting machine, pipe thread cutting -inch thread jaws: 1- 2 inch -Weight: 12 kg
Thread cutting machine, pipe thread cutter -for: Pipe size max. 2 inches -Cutting jaws: 1 inch -Drive: via 3 gearboxes -Dimensions: 550/360/H240 mm -Weight: 55 kg
cutter head, milling holder, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell milling cutter, face milling cutter, corner milling cutter-Manufacturer: Sandvik Coromant, cutter head milling cutter-Type: R260.22-080-15-Hole: Ø 27 mm-Dimensions: Ø 90 x 50 mm-Weight: 1.3 kg
Faceplate, faceplate chuck, four-jaw chuck -Mouth size: Ø 500 mm -without: Baking -Camlock mount: Ø 196 mm short taper 11 -Bolt circle: Ø 204 mm -Weight: 80 kg
Steel holder, clamping plate with T-slot, wedge holder-Steel holder: wedge holder-Shot size: 50 - 60 x 23 x 100 mm-Dimensions: 175/165/H215 mm-Weight: 12.3 kg
Broaching tool, broaching needle, special tool, grooving tool, keyway machine, keyway machine, keyway tool, keyway broaching needle -Manufacturer: SWZ, broaching needle -Type: SW 22 F8x28,35 RL 20-50 mm -Article No.: 24 3039 174 208 020 TKC -Width: Square 22 mm -Quantity: 3 pieces available -Price per piece -Total dimensions: Ø 22 x 925 mm -Weight: 2.1 kg/piece
Bezel, steady rest, lynette-steady rest: from lathe WMW DLZ 800-Max. Passage: Ø 260 mm-Tip height: 495 mm-Technical drawing: in the photos-Dimensions: 670/130 / H785 mm-Weight: 98 kg
Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet, steel locker -Tool cabinet: Steel cabinet with 4 shelves -Width: 950 mm -Depth: 500 mm -Height: 1950 mm -Door: lockable, without lock -Weight: 84 kg
End-side driver, end-side driver, end-side driver, driver tip, end-side driver, end-side driver -Manufacturer: Lenze ABW, end face drive (2 pieces) -Type: RD4 / MS4 -Forehead dimension: Ø 40 mm / Ø 45 mm -Recording: MK4 -Price/Fee: complete -Transport dimensions: 173/112/H60 mm -Total weight: 2.4 kg
Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws power chucks-Top jaws: soft top jaws for wedge bar chucks, helical teeth-Jaw width: 20 mm-Dimensions: see photo technical. drawing-Total dimensions: 80/60/H45 mm-Total weight: 1,5 kg
Cutter head, milling holder, carbide cutter, indexable cutter, face milling head, milling head, cutter head shell milling cutter, face milling cutter-Handover in the current condition as inspected-Condition see pictures-Cutter head shell milling cutter: Ø 172 mm-Hole: Ø 40 mm-Bolt circle: Ø 155 mm-Total dimensions: Ø 172 x 75 mm-Weight: 7.2 kg
Fixators, leveling units, leveling elements, machine base, machine feet, leveling shoes, machine foundation, leveling shoe, wedge shoe, machine support, leveling foot-Fixators: for machine tools and systems 4 pieces-min. height: 50 mm-max. height: 60 mm-Shipping/Price: complete-Dimensions: 210/200/H55 mm-Weight: 9.7 kg/piece
Tool holder, milling holder, milling tool, adapter-Milling fixtures: Adapter SK50 - MK5-Intake: SK50-Tool holder: MK5-Dimension: Ø 100 x 340 mm-Weight: 8.6 kg
Interchangeable jaws, top jaws, three-jaw chucks, clamping jaws, step block jaws-Top jaws: soft clamping jaws 1 set = 3 pieces-Hole spacing: 54 mm-Width: 45 mm-Dimensions: 135/120/H30 mm-Weight: 0.9 kg
Flow meter, vibration measurement, display device vibration measurement, monitor display-Manufacturer: Lorenz, measuring amplifier-Type: GM40-Price: per piece-Number: 5 piece-Dimensions: 75/20/H110 mm-Weight: 0.1 kg/piece
Clamping plate with T slots, plate field, welding table, welding table, plate boring machine -Width: 2005 mm -Length: 2000 mm -Height: 210 mm -Plate thickness: 120 mm -Plate: with support ribs -Groove width: 28 mm -Dimensions: 2000/2005/H210 mm -Weight: 2700 kg
Machine vice, sturdy vice, drill press vice -Machine vice: CEKABA-BON clamping jaws 125 x 40 mm -Clamping depth: 130 mm -Dimensions: 440/210/H90 mm -Weight: 14.4 kg
three-jaw chuck, three-jaw lathe chuck -Handover: in current condition as viewed -Short cone: has been shortened -Chuck size: Ø 200 mm -Through hole: Ø 54 mm -Hole: cone Ø 104.5 mm -as per pictures, without additional accessories -Weight 14.4 kg
Three-jaw chuck, three-jaw lathe chuck -Mouth size: Ø 250 mm -Passage: Ø 80 mm -Weight: 19 kg
Clamping plate with T-slots and cross table, plate field, welding table, welding table, plate boring machine, T-slot plate, pallet changer -Width: 1200 mm -Length: 1975 mm -Plate height: 260 mm -Plate thickness: 35 mm -Plate with: support ribs -Groove width: 25 mm -Groove spacing: 250/700 mm -Weight: 1590 kg
Two-jaw chuck, 2-jaw chuck, vise, faceplate -Mouth size: Ø 125 mm -exciting: centric -Replaceable jaws: soft -Weight: 6 kg
Thread cutting machine, pipe thread cutter -for: Pipe size max. 2 inches -Cutting jaws: 2 inch -Drive: via 3 gearboxes -Dimensions: 550/360/H240 mm -Weight: 55 kg
cutter head, milling holder, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell milling cutter, face milling cutter, corner milling cutter-Manufacturer: Sandvik Coromant, face milling cutter head-Type: F90SD-D125-40-12-Hole: Ø 40 mm-Dimensions: Ø 125 x 65 mm-Weight: 2.7 kg
Pipe sealing cushions, leak sealing cushions, sealing plate, pipe sealing, breakthrough sealing-Pipe sealing cushions-Outer/inner diameter: 84/31 mm-Height: 20 mm-Hole circle: Ø 59/7 mm-Delivery of: steel/stainless steel cover plates possible-Number: 109x pillows available-Price: per piece-Weight: 0.1 kg/piece
Vise, bench vise, locksmith vise, parallel vise, heavy-duty vise -Parallel vise: jaw width 150 x 30 mm -Wingspan: 190 mm -Quantity: 1 available -Dimensions: 485/210/H190 mm -Weight: 26 kg
Clamping plate with T-slots and cross table, plate field, welding table, welding table, plate boring machine, T-slot plate, pallet changer, pallet changing system -Clamping plate: with T-slots and clamping devices, comes from a CNC machining center -Width: 500 mm -Length: 400 mm -Groove width: 14 mm -Groove spacing: 65 mm -Dimensions: see technical drawing in the photos -Clamping devices: see photos -Dimensions total: 400/500/H315 mm -Weight: 111 kg
Tubular heater, heating tape, heating sleeve, mica heater, cylinder heater, heating cylinder, ceramic heating tape -Manufacturer: PSG, heating tape, heating sleeve -Type: 50Ø38 C -Heating power: 350 W -Voltage: 230 V -Dimensions: 200/130/H40 mm -Weight: 0.2 kg
Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet, steel locker -Tool cabinet: Steel cabinet with 4 shelves -Width: 1115 mm -Depth: 500 mm -Height: 1950 mm -Door: lockable, without lock -Weight: 90 kg
Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws-Top jaws: Jaw set for three-jaw lathe chucks, hard-Jaw width: 20 mm-Dimensions: see photo technical. drawing-Total dimensions: 51/60/H40 mm-Total weight: 0,6 kg
