Производитель:
(Категория: 709)
Мотор кремового сепаратора (скиммер), GEA Westfalia SAMM 20006. Мощность двигателя: 30 кВт - 380 В - 59 А - 1,470 об/мин - 50 Гц - 3 Ph. Ротор: DS5. I.CI. F. IP 55. Вес: 255 кг, тип машины: сепаратор / скиммер для мотора, мощность двигателя: 30 кВт - 380 В - 59 А - 1,470 об/мин - 50 Гц - 3 Ph
This APV Gaulin MC18-2,5TPS homogeniser is a 3-cylinder machine which is designed for 7.000 liter per hour with a maximum pressure of 150 bar. The homogensier is equipped with 2-stages with poppet valve cylinder and a MICRO-GAP homogenizing valve assembly which is especially for non-abrasive, low viscosity dairy products. The highly efficient MICRO-GAP valve will enable to operate at up to 40% lower pressure, while giving you the same or better product quality and saves energy and reduction in the machine drive-end loading. Manometers. Motor: 37 kW - 400 V - 70 Amp - 50 Hz - 1.475 rpm. Oil pumping system inside the machine. Stainless steel cladded., Excluding:, - Pulsation dempers, - Control panel, Type of Machine: Homogeniser, Capacity: 7.000 liter per hour, Stages: 2 stages with Micro-Gap valve, Max. Pressure: 150 bar, Valve cylinder: Poppet valves, Product: Milk, Piston diameter: 65 ...
Cream separator (Skimmer) for separation of milk or whey. Self cleaning. Machine comes with the bowl, motor (45 kW), motor cover, cyclone sludge tank, base plate, feet, watervalves (original Westfalia), main control cabinet with frequency converter (ABB) and control panel with Allen-Bradley SLC 5/03 CPU Processor and Allen Bradley PanelView 1000. Controls upgraded in 2008 by GEA Westfalia. Endress + Hausser Promass 83 Flowmeter., Type of Machine: Cream Separator, Capacity: 35.000 liter per hour, Bowl speed: 4.800 rpm, Motor: 45 kW - 460 V - 74 A - 1.775 rpm - 60 Hz - 3 Ph, Weight: 3.300 kg, Dimensions: 210 x 125 x 235 cm
Умывальник из нержавеющей стали примерно 47x41 см, сенсорный аккумулятор, сенсорный полотенец LOTUS EnMotion, дозатор мыла, дезинфицирующий диспенсер без бойлера горячей вод
On behalf of our client, we are requested to offer this Cheddar Cheese Plant for sale, because of bankrupcy of the previous owner. The whole line is delivered and built up in 2021 and has been in production for 1,5 years only., The line is already dismantled and packed for transport. It can still be inspected on the actual factory site in the warehouse., The capacity of the cheddar cheese plant was during production of the previous owner set at a milk intake of 50.000 pounds per hour, 20 hours per day = 1.000.000 pounds of milk per day, which means ± 100.000 pounds of cheddar cheese per day (= ± 45.359 kg of Cheddar cheese per day) = ± 2.500 Cheddar cheese blocks of 40 pounds per day (= ± 18,14 kg). Dimensions of the cheddar blocks: 35 x 28 x height cm., The available list of equipment exist out of:, - 4x Closed cheesevats, Manufacturer: Walker (supplied by Kusel), Model: Double O, V ...
Шкаф/шкаф из нержавеющей стали размером примерно 210wx200hx60d см, без содержимого, куплен в 2016 году за 851,44 евро нетт
Single jacketed tank with an propellor agitator. Volume: liter. Motor of the propellor agitator: 0,18 kW - 380 V - 50 Hz - 420 rpm. Stainless cover of the motor. Manhole with breather on top. Level indicator in top. Spraybowl for CIP cleaning. 3 legs. Inlet from the side. Outlet in the bottom center. Internal diameter 46 cm, internal height 72 cm. Total dimensions: 48 x 48 x 150 cm., Type of Machine: Process tank, Volume: 120 liter, Double jacketed: No, Insulation: No, Type of agitator: From the top, out of hte center, placed propellor agitator, Motor of agitator: 0,18 kW, CIP Spray bowls: Yes, Manhole: Yes, Number of feet: 3, High / Low Level sensors: Yes, Internal diameter: 46 cm, Internal height: 72 cm, Total outside diameter: Ø 50 cm, Total outside height: 150 cm, Weight: 60 kg
This APV Gaulin MC18-5TPS homogeniser is a 3-cylinder machine which is designed for maximum 5.500 liter per hour with a maximum pressure of 345 bar. This machine, based on the motor power and the piston diameter is set on 4.800 liter per hour with a maximum pressure of 345 bar. The homogensier is equipped with 2-stages, hydraulich controlled. Piston diameter 45 mm. Manometer. Motor: 55 kW - 380 V - 99 Amp - 50 Hz - 1.470 rpm, forced cooling on the motor (for running at lower capacities). Oil pumping system inside the machine. Stainless steel cladded., Additional features:, No typeshield on the machine, so unknown serial number and year of manufacturing. Model and capacity based on piston diameter and motor power., Excluding:, - Pulsation dempers, - Control panel, Type of Machine: Homogeniser, Capacity: 4.800 liter per hour, Stages: 2 stages, Max. Pressure: 345 bar, Valve cylinder: Poppet ...
Вставки для режущих лезвий для Wolf L&W E130 инструментальной стали, 1 комплект, очищен
Complete Milk and Cream pasteurisation line with separator, homogeniser and CIP tanks, with an input capacity of 12.000 liter per hour. Line still located in the dairy plant in Germany., Milk pasteurisation unit:, - Open level tank., - Product pump., - Plate Heat Exchanger, 4-sections, GEA Ahlborn, VT 40 BC-6, year 1981, volume 194 liter, 6 bar., - Overpressure system with boosterpump to get more pressure on the raw milk side compare to the pasteurised milk side., - Flow diversion valves which opens in case the pasteurisation temperature is not reached., - Holding 20 seconds., - Indirect hotwater circuit (steam - water) with steam valves, SWEP brased plate heat exchanger and circulation pump., - Icewater circuit with ice water valves., - Temperature cylce: 7° (in) - regeneration - 56 °C (separator / homogeniser) - 74 °C (pasteurisation) - holding (20 seconds) - regeneration - 4 °C (o ...
Вставки для режущих лезвий для шлифовальной машины ø примерно 80 мм, упакованны
Вставки для режущих лезвий для Wolf L&W H82 2.5 Inox, 1 комплек
Luwa SMS GmbH LN-0200 - Vertical Thin Film Evaporator consist of a cylindrical, vertically-arranged body with heating jacket. A rotor inside the body is equipped with rows of pendulum blades along the full length of the dryer., Special thin-film evaporator designed for dairy service, discharge system, vapor pipe, condenser, and drives. It was in used as a pilot plant on a dairy service until early 2001 and afterwards converted to a 2 square metre cheese base processor with discharge system and ran till 2025 in a Casein plant in a dairy factory in New Zealand., The vertical thin film dryers operate as follows: The wet feed is spread by the pendulum blades in a thin layer onto the heated wall. During this process, the volatile components evaporate continuously out of the product layer at high evaporation rates. The pendulum blades are designed with a minimum gap to the heated wall to preve ...
The GEA Westfalia CA 365-010 is a two-phase horizontal stainless steel decanter centrifuge (liquid + solids separation). It’s a continuous, high-G, conveyor (scroll) decanter used in food, oil, wastewater and chemical applications. Previously it is used as a fine decanter in a casein plant (foood industry). Diameter bowl: 365 mm. Diameter scroll 354/205 mm. Bowl speed: 4.000 rpm. Solids: 2.0 kg/dm3. Motor: 30 kW - 420 V - 50 Hz - 2.930 rpm - 50,5 A. Including hydraulic unit (Viscotherm AG, Pump-unit, C18.5-28.2Z/LP-W-50/10, year 2015, motor 18,5 kW, max pressure 170 Bar)., Type of Machine: Decanter, Diameter: 354 / 205 mm, Bowl speed: 4.000 rpm, Solids: 2.0 kg/dm3, Motor: 30 kW - 420 V - 50 Hz - 2.930 rpm - 50,5 A, Weight: 2.400 kg, Dimensions: 240 x 150 x 185 cm
The GEA Nu-Con CV 375 C is a Convey Through Sanitary Rotary Valve (Airlock) for use in gravity or pneumatic conveying systems, handling food, dairy, pharmaceutical, nutritional products and other dry ingredients. Quick disassembly without tools allows for rotor removal and access to all product contact areas for inspection and cleaning. The rotary valve has 8 bladed cylindrical rotors and accurately gauged clearances are maintained between the rotor tips and ends within the valve bore. Blow through (CV) with product entering at the top and discharging horizontally at 90 ° to inlet via a pneumatic conveying line, either vacuum or pressure. Previously used for transporting of Casein in a dairy factory. Material: SS SS AR. Drawing No. A3-33456-01. Motor: 0,25 kW - 220-240 / 380-415 V @ 50 Hz or 240-266 / 415-460 V @ 60 Hz - 1.300/27 rpm or 1600/34 rpm - 1,27/0,73 Amp or 1,15/0,66 Amp - 3 P ...
Unused hydrodynamic coupling which transmit mechanical power from the motor to the driven machine via fluid flow by two bladed wheels positioned face to face. The primary wheel is connected to the motor and acts like a rotary pump, while the secondary wheel is connected to the driven machine and acts like a turbine. Power transmission is proportional to the fill level in the working circuit. As a result of the mechanical separation of the drive and driven sides, the hydrodynamic coupling transfers the power wear-free, simultaneously dampening torsional vibration and torque shocks in the drive chain. These clutches are used in different kind of GEA Westfalia Cream Separators / Skimmers / Bactofuges, like model MSA 200 / MSB 200 / MSD 200 / CNB 215 / CND 215 etc., Type of Machine: Clutch Cream Separator / Skimmer, Weight: 45 kg, Dimensions: 80 x 60 x 40 cm
The GEA Nu-Con CV 375 C is a Convey Through Sanitary Rotary Valve (Airlock) for use in gravity or pneumatic conveying systems, handling food, dairy, pharmaceutical, nutritional products and other dry ingredients. Quick disassembly without tools allows for rotor removal and access to all product contact areas for inspection and cleaning. The rotary valve has 8 bladed cylindrical rotors and accurately gauged clearances are maintained between the rotor tips and ends within the valve bore. Blow through (CV) with product entering at the top and discharging horizontally at 90 ° to inlet via a pneumatic conveying line, either vacuum or pressure. Previously used for transporting of Casein in a dairy factory. Material: SS SS AR. Drawing No. A3-33456-01. Motor: 0,25 kW - 220-240 / 380-415 V @ 50 Hz or 240-266 / 415-460 V @ 60 Hz - 1.300/25 rpm or 1600/30 rpm - 1,27/0,73 Amp or 1,15/0,66 Amp - 3 P ...
Кремовый сепаратор (Skimmer). Самоочистка. В комплекте комплектуется чаша, мотор (18,5 кВт), крышка мотора, базовая плита с двумя футами (2 отсутствующие), водяные клапаны (оригинальный Westfalia), панель управления с оригинальной панелью GEA, все входные/выходные трубы с насосами, индикатор расхода, клапан противодавления и сервисные инструменты для обслуживания, включая прессовочный инструмент. Тип машины: Кремовый сепаратор / скиммер, производительность: 10 000 литров в час, Скорость чаши: 5,920 об/мин, ...
Aerator (alias whipping machine, foam producer, foam generator, industry mixer) for manufacturing foam for a wide range of different products. The heart of the machine is the mixing head, the „inline axial flow mixer. This mixing head consists of a rotor and a stator, which are equipped with many pins to guarantee a precise rotation. A liquid or pasty medium is transported preciseley through the pump. At the entrance of the mixing head, nitrogen is proportional dosed to the product quantity. Due to the rotation of the mixing head, nitrogen bladders are consistently distributed. The foam can be take from at the exit of the mixing head. The end product is a whipped mass which is now ready for filling. Mixing head type AERO 4.0 / 1368 square pin. For productions up to 4.000 l/h (product-dependent). Motor: 400 V - 19 kW - 39 A - 50 Hz. Stainless steel free standing control panel with Sieme ...
Эстакада из нержавеющей стали примерно 50x34x40 с
The NETZSCH NM031BY02S12B NEMO® pump is a progressing cavity pump (also known as a mono or screw pump), engineered for the continuous and gentle transfer of challenging media. This pump operates on the well-proven progressing cavity principle, consisting of two primary components: a precision-machined helical rotor and a resilient elastomer stator. The rotor features a single-helix design with a large pitch, deep thread profile, and small core diameter. As the rotor rotates eccentrically within the stator, sealed cavities are formed that convey the product continuously and pulsation-free from inlet to outlet. This pump is previously used in a dairy factory. Motor: 0,75 kW - 230/400 V - 50 Hz - 1.375 rpm - 3,64/2,10 A. Connections on the inlet/outlet: DN 50. Current capacity: 70 - 400 ltr/h. Pressure: up to 8 bar. Rotor speed: 30 - 150 rpm., Key Advantages:, - Valve-free design with stab ...
Домкрат из нержавеющей стали примерно 44x44x36 с
Tetra Pak desserts pilot UHT plant with an pasteurisation, indirect and/or direct (VTIS) heating module @ 225 ltr/h and only a pasteurisation step @ 125 ltr/h, previously used in a R&D centre for desserts., Indirect unit, skid mounted, including:, - Open level tank, serial number: DFB-5259-BT01, year 2008, 50 ltr with propellor agitator (Lightnin ECL-M59-25)., - Feed pump (mono / screw pump, Netzsch, NM031BH02S12H, serial number 387231, year 2007, 120 - 300 ltr/h, speed 20 - 80 rpm, discharge pressure 2 bar, product temperature 5 - 20 °C)., - Lobe pump, Alfa Laval, SRU1/005/LD, serial number 431441, year 2008, motor: 0,37 kW, 400 V, 50 Hz, n1: 1.360 rpm, i: 15,57 n2: 89 rpm., - Heating module A, centrifugal pump: Alfa Laval FM-0/95, serial number: 31457-17997., - Heating module B, centrifugal pump: Alfa Laval FM-0/95, serial number: 31457-17999., - Heating module C, centrifugal pump: Al ...
Koch Membrane Systems (GEA Tuchenhagen computer designed) Ultra Filtration (UF) plant for continuous circulation / concentration / filtration and the production of double cream cheese (philadelphia style). Once the plant is running continuously with ratio control, no manual interventions are generally necessary for the production of the UF concentrate. However, for optimal production of consistent quality, strict adherence to various prerequisites is necessary, e.g. regarding cleaning. Line still located at its original position in the dairy in Austria., The Ultra Filtration line exist out:, - Level tank, 750 liter., - Product feed pump (P1), Tuchenhagen VPB 32 L, 5.000 ltr/h, 39 mWs, motor 3 kW - 2.900 rpm - 380 V - 50 Hz., - Permeate pump (P2), Tuchenhagen VPB 32 L, 5.000 ltr/h, 35 mWs, motor 3 kW - 2.900 rpm - 380 V - 50 Hz., - CIP pump (P3), Tuchenhagen VPD 51, 110.000 ltr/h, 8 mWs, ...
Каттер LASKA 60 л, 1 400/2 800 об/мин, в остальном едва читаемый, ещё одна табличка MIN132M, также трудночитаемая, примерно в 2000 году, дисплей обновлённый к 2000 году за 676,49 евро нетт
The dynamic in-line flow mixer type RM offers performance, precision and hygiene for the food, chemical and plastics processing industries and for numerous other process mixing processes.The performance spectrum of the dynamic flow mixer RM includes stirring, mixing, gentle mixing and blending, reacting, diluting, coloring, homogenizing and much more. Drive with tubular housing and mixing shaft running therein. Welded mixing elements. Mechanical seal. Vertical design with foot flange. It is a dynamic flow mixer that is suitable for CIP (Cleaning in Place). Capacity: up to 4.000 ltr/h. Lenght of the rotor: 425 mm. Inside diameter of the house 130 mm. Connections in / out: DN65. Motor: ± 3 kW (not visible on nametag) - 400 V - 50 Hz., Type of Machine: Inline mixer, Capacity: up to 4.000 ltr/h, Length of rotor: 425 mm, Inside diameter of the house: 130 mm, Motor: ± 3 kW (not visible on na ...
Шлифовка LASKA W 130-H, S/N 20239, построена в 2021 году, 7,5 кВт, 3x 400 В/50 Гц, аксессуары, приобретена в 2021 году за 21 500 евро нетт
Главный вал для сепаратора Alfa Laval MRPX 214 TGV или MRPX 413 SGV, тип машины: главный вал, приводная линия: 50 Г
An unused and still originally packaged continuous pasteurizer Pietribiasi Michelangelo Srl is available. Throughput capacity milk: 1500l/h, throughput capacity cream max. 40% fat: 750l/h, inlet temperature: 6°C, pasteurization at 68/74/88°C, outlet temperature: 6°C, capacity foreflow tank-balance tank: 100l. With centrifugal pump for product and cleaning, additional section and hot water group, plate heat exchanger with stable internal construction in AISI304, special heat exchanger plates Sondex Denmark in AISI316, surface area per plate: 0.08m², flow volume per plate: 0.21dm³, special gaskets made of nitrile snap-on without glue, hydraulic test pressure: 8.0bar, test temperature: 110°C, heat recovery: 85%, temperature profile 6-68/74/88-6/33/45°C - 4 sections, final heating outlet cheese/yogurt: 33/45°C, media: approx. 3000+3000l/h hot water 92°C, approx. 3000l/h cooling wate ...
Неиспользованный шпиндель чаши для сепаратора Alfa Laval MRPX 409 SGV., тип машины: чашечный шпиндель, приводная линия: 50 Г
37 € 
