MB máquina utilizada para venda

Máquina dobrável MB multipli-CAS 524 Tipo de máquina: FN

Bolsos: 4 Tamanho máximo da folha (cm): 52 x 85 Tamanho mínimo da folha (cm): 10 x 12 Comprimento mínimo da dobra (cm): 3,5 Equipamento / informações complementares: T-STATION 2.FW CAS 52-B (4 bolsos) Ser. N.º: 00958228 ALIMENTADOR DE EMPILHAMENTO FSA52 Ser. N.º: 00979092

N.º S.: 031059211 Saída: 200 m/min (dependendo do material) Tamanho (cm): máx. 38 x 65 // min. 7 x 12 Equipamento / informações complementares: Bolsos: 4 Comprimento da dobra: máx. 46,5 cm; mínimo 3,5 cm / 1,8 cm Peso do papel: 40 a 250 GMS com ranhura ou eixo de perfuração

M. No.: 79750864 Tamanho (cm): 38x38 Sacos: 2 Tipos de dobra: dobra em espiral, dobra ziguezague, dobra dupla paralela, dobra única Equipamentos / informações adicionais: Compressor

Formato (mm): Max 297 x 420 // Min. 105 x 148 Sacos: 2 Tipos de dobra: dobra em espiral, dobra ziguezague, dobra dupla paralela, dobra única

Formato (cm): 35x45 Equipamentos / informações adicionais: Bolsos: 2 Tipos dobráveis: costura sinuosa, dobra ziguezague, costura dupla paralela, costura única Realização: Alimentador de aspiração do piso inferior: 30 000 folhas/h Alimentador de atrito: 20 000 folhas/h para costura paralela A4, 80 g/m2 Peso do papel: 40 - 250 g/m2 com dobra paralela simples Valores de ligação elétrica: Tensão da rede: 230V Consumo atual: máx. IOA

4 + 4 sacos Farejador Saída disponível: Imediatamente

Prestige Fold52 folder with window fold 52/6 - FSA, NET 52/0/6, DRY PUMP

Computerized control panel. Automatic setting of measurements and type of fold. 60 memory channels. Electronic control of the distance between the sheets and of the double sheet. Visualization of the pressure value of the folding rollers. 4 parallel folds Folding rollers diameter mm. 40. Format: maximum mm. 380 x 650 minimum mm. 70x120. Minimum fold length mm. 28. Speed ​​up to 200m/minute. Paper weight from 40 to 250 g/m2. Electronic control of the double sheet. Non-stop continuous charging power supply. Revised and guaranteed for 12 months

Falzmaschine / Folding Machine (Pharma-Fold) Multipli 464S Serial-No. 83357220 Unterflur-Sauganleger / Non-Stop Feeder Anleger Format / Feeder Size min. 10x10cm - max. 45,5x63cm Leistung / Output max. 220m/min Papiergewicht / Paper weight 40-200g/m2 4 Taschen 4 Bogenweichen / 4 Buckles 4 Deflectors 1 Kompressor / 1 Compressor Schuppenauslage / Stream Delivery Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nuernberg - Can be test

Ersatzteile - Peça de Reposição MB Multipli 382 2 fivelas dobráveis para MB 382 Entrega de banda para MB 382-Online-Video-Inspection por Skype-Video- -Ficaríamos muito satisfeitos com a sua visita - mais máquinas em Stock- -Disponível imediatamente - Pode ser inspecionado- -Em estoque Emskirchen / Nuernberg - Pode ser test-

Máquina dobrável MB multipli-cas 524 Serial-No . 78261 Inspeção de vídeo on-line por Skype-Video Ficaríamos muito satisfeitos com a sua visita - mais máquinas em Stock Disponível Imediatamente - Pode ser inspecionado Em stock Emskirchen / Nuernberg - Pode ser testado

fivelas: 4 pcs facas: 0 pcs tamanho máximo do papel: 52 x 85 cm N° de série: 98979071 velocidade: 200 m/min tensão: 3 x 400 V frequência: 50 Hz dimensões: 3 x 1m + 1,80 x 1 m profundidade máxima 46,5 cm gramatura de papel 40-250 g/m ² tamanho completo 10 x 12 cm

Number of sanding units: 2 St. sanding width: 100,150 mm Sanding height max.: , The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

total power requirement: 230 Volt table diameter: 300 mm table load: 100 Horizontal kg swivelling range: 0 - 90 Grad turning speeds: 0,2 - 2,0 U/min turning speeds: 1,2 - 12,0 U/min bore: 20,0 mm weight of the machine ca.: 50 kg dimensions of the machine ca.: 480 x 325 x 470 mm Furnishing: - Precise drive unit with face plate, on a stable floor stand. - clockwise / counterclockwise - 2 speed series, stepless - Swivel range from 0 ° - 90 °. Manual tilt - DC gear motor with worm gear, infinitely variable. - diameter of 300 mm. Chrome-plated surface to protect against weld spatter. - The devices control panel is easy to understand and use. - Start / stop via a location-independent foot switch. - The speed and direction of rotation are set on the machine. - HF protected. Scope of delivery: - control (integrated) - foot switch The data for this ad was created with ModulMWS - the software  ...

table diameter: 340 mm table load: 290 horizontal kg table load capacity: 190 vertikal kg turning speeds: 0,6 - 6,0 U/min spindle bore: 60,0 mm swivelling range: 0 - 90 Grad weight of the machine ca.: 62 kg dimensions of the machine ca.: 380 x 340 x 425 mm Furnishing: - The table can be tilted and clamped at an angle of 0 to 90 - Start / stop via a location-independent foot switch. - Direction of rotation can be selected right / left. - Adjustable rotation time. - The turntable has a 60 mm hollow shaft. - The turntable has a diameter of 340 mm. The surface is chrome-plated for Protection against welding spatter. - The table speed is adjustable from 0.6 - 6 rpm. - The control of the welding machine via the turntable control is possible. - The ground contact transmits 300 A / 100%. - The turntable and the control are separate. - HF protected. - Operating instructions in German Functions ...

table diameter: 500 mm table load: 300 horizontal kg. table load: 150 vertikal kg. swivelling range: 0 - 90 Grad turning speeds: 0,2 - 2,5 U/min bore: 90,0 mm table height: ~ 650 mm mm motor: 230 Volt weight of the machine ca.: 90,0 kg. range L-W-H: 385 x 340 x 375 mm Furnishing: - The table can be tilted and clamped at an angle of 0 ° to 90 ° - manual tilting - Start / stop via location-independent foot switch - Direction of rotation can be selected right / left - Adjustable rotation time - The control of the welding machine via control - 350 amp ground connection Scope of delivery: - control (integrated) - foot switch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 340 mm table load: 160 horizontal kg. table load: 100 vertikal kg. turning speeds: 0,6 - 6,0 U/min swivelling range: 0 - 90 Grad bore: 60,0 mm motor: 230 Volt weight of the machine ca.: 56 kg. range L-W-H: 385 x 340 x 375 mm Furnishing: - The table can be adjusted at an angle of 0 to 90 degrees tilt and jam - Start / stop via a location-independent foot switch. - Direction of rotation can be selected right / left. - Adjustable rotation time - The turntable has a 60 mm hollow shaft - The turntable has a diameter of 340 mm. The surface is chrome-plated for Protection against welding spatter. - The table speed is adjustable from 0.6 - 6 rpm. - The control of the welding machine via the turntable control is possible. - The ground contact transmits 300 A / 100%. - The turntable and the control are separate. - HF protected. - COM 1800 control with lap welding - Operating in ...

table diameter: 900 mm table load: 1.000 kg turning speeds: 0,12 - 1,2 U/min swivelling range: 0 - 135 Grad speed: Kipp 0,35 U/min welding current: 500 A dimensions of the machine ca.: 1475 x 1050 x 900 mm For heavy industry When choosing a turntable, it is essential Turning and tilting torque must be taken into account. To note applies to how far the center of gravity of the workpiece is from the The faceplate is away or how far the center of gravity is is eccentric from the center. By means of a Rotary and tilting tables can be used to optimize workpieces position for welding. - Robust construction. - Infinitely variable. - Hand remote control. - HF protected. Furnishing : - 1 control (integrated) - 1 wired remote control The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.