Fabricante:
(Categoria: 204)
Gebr. Máquina de moer correias longas JOHANNSEN T96 YOC 1994 Carga total ligada: 5,7 kW / Corrente nominal: 12,5 A Potência do motor: 4,0 / 5,5 kW 2 velocidades de correia Tamanho da mesa: 278 x 95 cm eletr. Elevador de mesa Dimensões da correia: 150 x 7.800 mm Comprimento máximo utilizável da correia de lixamento: 260 cm Grande deslocamento (direita): 1.000 x 310 mm Deslocamento à esquerda: 550 x 310 mm Unidade de moagem pneumática (pressão pneumática) incluindo 2 sapatos de lixagem: 300 + 450 mm (incluindo dispositivo de sucção) Braço de sucção para aspirar a sabata de lixar Dispositivo de supressão a vácuo (pneum. fixação da peça de trabalho) com 8 ventosas incluindo bomba de vácuo Plataforma gira-discos (pneumática de curso) Tábua de lixa com batente Seletor para rotação no sentido dos ponteiros do relógio ou anti-horário Bocal de sucção ...
Key data: 1350 mm, 1
- Largura de trabalho 1350 mm - Rolos de pressão borrachados - Mesa de rolos na entrada e saída - Velocidade de alimentação da correia 2,5-13 m/min, ajustável infinitamente, correia perfurada (preparada para dispositivo de tensão a vácuo por motor de acionamento externo, não incluído) - Unidade de remoção de rolos de contacto combi (15 kW), com barra de pressão do elo eletrico (largura do elemento 25 mm), velocidade da correia infinitamente variável de 2,5 a 20 m/s, comprimento/largura da correia 2150/1370 mm, dispositivo de descompressão da correia, apoio para sapato de lixamento na máquina, pneum. Dispositivo abrasivo de tensão de correia - 1 escova rotativa de limpeza de peças (0,75 kW) no lado da saída da máquina - Pintura: RAL 5018 - Carga total ligada aproximadamente 22 kW (36 A) - Tensão de operação: 400 V, 50 Hz Dados técnicos sujeitos ao eq ...
Key data: 1100 mm, 3 , 150 mm
Lixadora de fita larga BÜTFERING, AWS-3E-1100, # 0-001-747-312, ano 1991 DADOS TÉCNICOS: Largura de trabalho máx. 1.100 mm Altura de trabalho máx. 150 mm Largura da correia abrasiva 1.110 mm Correia de lixamento: comprimento 1.900 mm 1. Unidade de moagem Rolo de contacto de aço perfilado D=200 mm Potência do motor 15 KW 2. Unidade de moagem Unidade combinada de laminação de contacto - sapata de moagem Rolo de contacto emborrachado perfilado, D=150 mm Sapata de lixagem com almofada de ar Potência do motor 11 kW 3. Unidade de moagem Unidade de sapata de moagem, feixe de pressão de ligação eletronicamente controlado Largura do elemento 30 mm Sincronização / contra-rotação Velocidade da correia de lixamento infinitamente variável (conversor de frequência) Ecrã digital da velocidade da correia de lixagem Potência do motor 11 kW - Tapete ...
Key data: 390 mm, 390 mm
Máquina de moer Löwer Tipo: HBS 400 Ano de Fabricação: 1999 CE Máquina de lixar versátil de uma só correia, tanto para rectificação por adaptação Viga grossa de glulam, bem como para calibração e medição. Largura de moagem máx. 390 mm Altura de moagem máxima: 390 mm 1 sapato de lixar de cima Motor de moagem 7,5 kW Dimensões da correia de lixamento: 300 x 1800 mm Tapete de transporte para alimentação de materiais Taxas de alimentação 6/11/16 m/min. Diâmetro da ligação de extração: 150 mm Altura constante da mesa para o uso de transportadores de rolos Oscilação da correia abrasiva pneumática Fixação pneumática por correia abrasiva Sapata especial de lixagem HBS para ajustar o rectificado em diferenças de espessura de até 4 mm ou peças tortas Ajuste da adaptação do seletor / calibração Ajuste motorizado da espessura da peça com ...
Manufacturer: Unitek, Type: 3N RRT 1100, Monting of the machine: Stahl/Gummi/Schuh, Sanding width mm: 1100, Sanding hight mm: 160, Number of sanding belts: 3, Shore roller 1: Stahl 160 mm, Shore roller 2: Gummi 220 mm, Walze 3 Shorehärte : Schuh 50 mm, Band 1 Leistung kW : ca. 15, Band 1 Schleifbandgeschwindigkeit m/s : 18, Band 2 Leistung kW : ca. 15, Band 2 Schleifbandgeschwindigkeit m/s : 16, Band 3 Kombiaggregat Walze/Schuh: yes, Band 3 Leistung kW : ca. 15, Band 3 Schleifbandgeschwindigkeit m/s : 14, Table hight adjustment by engine: 0,25 kW, Continous adjustable feeding speed m/min: 4-20, Transportbandantrieb kW: 1,5,
Manufacturer: Heesemann, Type: LSM 8, Year: 2003, Control: Steuerung der Anlage Neu, Monting of the machine: Quer / Längs / Bürste / Bürste, Sanding width mm: 1400, Sanding hight mm: 3 - 120, Number of sanding belts: 2, Sanding belt dimensions: 2.620 x 1450, Transverse sanding units: 1, Längsschleifaggregate: 1, Band 1 Leistung kW : 15, Band 1 Schleifbandgeschwindigkeit m/s : 0,5 - 12, Belt 2 shoe unit: yes, Band 2 Schrägstellbar Grad : 15, Band 2 Innenliegendes Drucklamellenband : 0,5 - 12, Band 4 Schleifbandgeschwindigkeit m/s : 16, Belt 4 synchronous and reverse run: 2, Frequency control of belts: 5 - 25, Combi unit roller/shoe: 2,2, Continous adjustable feeding speed m/min: yes, Transportbandantrieb kW: yes, Typ/Stückzahl: 5,5 kW, Vacuum table: 4,0 + 1,5 kW, Brushing unit: 250 + 150 mm, Ionising: 7.600, Year :2003
Manufacturer: Sandingmaster Breitbandschleifmaschine , Type: SA-3202-1100, Year: 1996, Monting of the machine: Walze/Kombi, Sanding width mm: 1100, Sanding hight mm: 140, Number of sanding belts: 2, Sanding belt dimensions: 2150-1150, Werkstückdickenmesseinrichtung mittels Ultraschallsensor : yes, Elektronische Tastung mm: yes, Frequency control of belts: Band 2, Längsschleifaggregate: 2, Rubber roller: yes, Steel roller: Gummi ca.80 shore, Band 1 Leistung kW : ca.10, Belt 1 shoe unit: yes, Band 2 Leistung kW : ca.10, Combi unit roller/shoe: 1, Continous adjustable feeding speed m/min: 8-15, Transportbandantrieb kW: 1,5, Vacuum table: yes, Segment sanding shoe: yes, Weight in kg: 2500, Year :1996
Manufacturer: De Stefani, Type: MVT 3500, Year: 2008, Monting of the machine: 3 X Profilschleifen, Program: yes, Axis control: no, Work piece width min-max mm: 60, Min.-max. workpiece height in mm: 80, Work piece length min-max mm: 250, Sanding hight mm: 80, Schleifaggregate rechts : 3, Abrasive belts at top: 3, Monting of the machine: 3 X Profilschleifen, Chain width mm: yes, Monting of the machine: ca.1,5, Unit 1 tiltable: yes, Aggregat 1 kW: ca.1,5, Unit 2 slewable: yes, Aggregat 2 kW: ca.1,5, Unit 3 slewable: yes, Aggregat 3 kW: ca.1,5, Unit 9 slewable: 3, Shoes electr. controlled: yes, Constant table hight: yes, Machine length: ca.4000, Year :2008
Manufacturer: Costa Kalibrieranlage, Type: KA CC 1350, Year: 2007, Control: Siemens/KEB, Monting of the machine: 2x Stahlwalze geriffelt, Sanding width mm: 1350, Sanding hight mm: 120, Number of sanding belts: 2, Sanding belt dimensions: 2620 X 1380, Table hight adjustment by engine: yes, Steel roller: 2, Längsschleifaggregate: 30, Belt 2 shoe unit: 22, Band 2 Schrägstellbar Grad : no, Band 2 Innenliegendes Drucklamellenband : nur Gegenlauf, Table hight adjustment by engine: yes, Elektronische Tastung mm: 8-20, Separation of sampling in mm: 2,2, Table hight adjustment by engine: variabel, Continous adjustable feeding speed m/min: yes, Constant table hight: no, Brushing unit: yes, Werkstück-Abstrahleinrichtung: 3400, Diameter/ brush bristles: yes, wast cleaning: Pneumatische Absaugvorrichtung dabei, Oszilation dabei, Year :2007
Manufacturer: Heesemann 5 Aggregate, Type: LSM 8, Year: 2005, Control: Heesemann, Monting of the machine: Stahlwalze/Querband/Längsband/Längsband/Längsband/Bürste, Sanding width mm: 1300, Sanding hight mm: 3-80, Number of sanding belts: 5, Sanding belt dimensions: 2620 X 1350, Konstantentisch: yes, Elektronische Tastung mm: yes, Separation of sampling in mm: 32, Frequency control of belts: 2, Transverse sanding units: 1, Längsschleifaggregate: 3, Bürstenaggregate: yes, Steel roller: 1, Bürstenaggregate: yes, Band 1 Leistung kW : 37/Walze, Band 1 Schleifbandgeschwindigkeit m/s : 28, Belt 2 shoe unit: Querschleifaggregat, Band 2 Kombiaggregat Walze/Schuh: zuschaltbare Stahlwalze, Band 2 Leistung kW : 18,5, Band 2 Schleifbandgeschwindigkeit m/s : 0,5-24, Band 3 Leistung kW : 20/24, Band 3 Schleifbandgeschwindigkeit m/s : 10-20, Band 4 Leistung kW : 18,5, Band 4 Schleifbandgeschwin ...
Manufacturer: Heesemann, Type: LSM 8, Year: 1995, Control: Heesemann, Sanding width mm: 1350, Sanding hight mm: 3 - 140, Number of sanding belts: 2, Sanding belt dimensions: 2620 x 1350, Table hight adjustment by engine: no, Band 1 Leistung kW : 11, Band 1 Schleifbandgeschwindigkeit m/s : 0,3 - 12, Band 2 Leistung kW : 11, Band 2 Schleifbandgeschwindigkeit m/s : 0,3 - 12, Frequency control of belts: yes, Table hight adjustment by engine: no, Continous adjustable feeding speed m/min: 8 - 40, Transportbandantrieb kW: 4,0, Intermediate sanding of lacquer: yes, Vacuum table: 5,5, Noise enclosure: yes, Brushing unit: 4,0 + 1,5 kW, Texturing brush diameter: 250, Levelling brush for paint: 150, Weight in kg: 8850, Year :1995
Manufacturer: Heesemann, Type: LSM8 U + LSM8 S, Year: 1997, Control: Heesemann, Monting of the machine: L / L / L , Equipment of machine 2: L / L / L, Double sided sanding line: yes, Sanding width mm: 1350, Sanding hight mm: 3 - 80, Number of sanding belts: 3 + 3 , Sanding belt dimensions: 2620 x 1350, Rollers: 2 + 2, Steel roller: 2 + 2, Band 1 Leistung kW : 45, Band 1 Schleifbandgeschwindigkeit m/s : 24, Band 2 Leistung kW : 37, Band 2 Schleifbandgeschwindigkeit m/s : 24, Band 3 Leistung kW : 13/17, Band 3 Schleifbandgeschwindigkeit m/s : 10/20, Continous adjustable feeding speed m/min: 3 - 15, Transportbandantrieb kW: 4 + 3, Abrasive belts at bottom: 3, Intermediate sanding of lacquer: no, Vacuum table: 15 / 5,5, Noise enclosure: yes, Brushing unit: yes, wast cleaning: 0,75 kW, Weight in kg: 11000+9000, Year :1997
Manufacturer: Heesemann , Type: LSM 8, Year: 1998, Control: Heesemann, Sanding width mm: 1300, Sanding hight mm: 1200, Number of sanding belts: 3, Sanding belt dimensions: 2620 X 1350, Konstantentisch: yes, Elektronische Tastung mm: yes, Separation of sampling in mm: 32, Transverse sanding units: 1, Längsschleifaggregate: 2, Band 1 Leistung kW : 13/17, Belt 1 shoe unit: Queraggregat, Band 1 Schleifbandgeschwindigkeit m/s : regelbar, Band 2 Leistung kW : 13/17, Band 2 Schleifbandgeschwindigkeit m/s : regelbar, Band 3 Leistung kW : 13/17, Band 3 Schleifbandgeschwindigkeit m/s : regelbar, Transportbandantrieb kW: ca.4, Intermediate sanding of lacquer: yes, Vacuum table: yes, Segment sanding shoe: yes, Werkstück-Abstrahleinrichtung: yes, Ionising: yes, Year :1998
Manufacturer: Heesemann, Type: MFA 8/Rechtsmaschine, Year: 1996, Monting of the machine: Längs/Bürste, Sanding width mm: 1350, Sanding hight mm: 3 - 140, Number of sanding belts: 1, Sanding belt dimensions: 2620 X 1350, Band 1 Leistung kW : 11, Belt 1 shoe unit: yes, Band 1 Schleifbandgeschwindigkeit m/s : 0,5 - 12, Elektronische Tastung mm: yes, Separation of sampling in mm: 16, Frequency control of belts: 1, Continous adjustable feeding speed m/min: 5 - 25, Transportbandantrieb kW: ca.3, Intermediate sanding of lacquer: yes, Constant table hight: yes, Vacuum table: yes, Segment sanding shoe: yes, Brushing unit: yes, Diameter/ brush bristles: 150, Year :1996
Manufacturer: Delle Vedove, Type: SPL /7/200, Year: 1995, Sanding width mm: ca.10-100, Sanding hight mm: 80, Sanding belts horizontal/bottom: 1, Bandschleifaggregate Stk.: 1, Bürstenaggregate Stck.: 3 links+3 rechts, Right side units Qty.: Band, Unit 1 tiltable: yes, Aggregat 1 kW: ca.1,5, Unit 2 slewable: Bürste, Aggregat 2 kW: ca.1,2, Unit 3 slewable: Bürste, Aggregat 3 kW: ca.1,2, Unit 4 slewable: Bürste, Aggregat 4 kW: ca.1,2, Unit 5 slewable: Bürste, Aggregat 5 kW: ca.1,2, Unit 6 slewable: Bürste, Aggregat 6 kW: ca.1,2, Unit 7 slewable: Bürste, Aggregat 7 kW: ca.1,2, Transport chain mm: yes, Feeding speed min-max m/min: 5-20, Intermediate sanding of lacquer: yes, Constant table hight: yes, Brushing unit: yes, machine ready for demonstration: yes, FREE TEXT: mit automatischer Schleifscheiben Zustellvorrichtung für Schleifscheibenaggregate/inkl Siko Apstapelanlage, Year :199 ...
Manufacturer: DMC Breitbandschleifmaschine, Type: Topsand, Year: 1994, Monting of the machine: Walze/Schuh/Schuh/Bürste, Sanding width mm: 1300, Sanding hight mm: 120, Number of sanding belts: 3, Sanding belt dimensions: 2620 X 1350, Rubber roller: 1, Shore roller 1: ca.85, Längsschleifaggregate: 22,5, Belt 2 shoe unit: 15, Belt 2 synchronous and reverse run: 15, Belt 4 pressure segment belt: no, Combi unit roller/shoe: 8-25, Table hight adjustment by engine: ca.5, Abrasive belts at bottom: yes, Intermediate sanding of lacquer: yes, Programmanwahl extern: Struckturbürste von unten, Vacuum table: Bürste, Pressure pads for short workpieces: 180, Segment sanding shoe: von Unten, Year :1994
Manufacturer: Heesemann, Type: LSM 8, Year: 1995, Monting of the machine: Quer/Längs/Längs/Längs/EA , Sanding width mm: 1300, Sanding hight mm: 150, Number of sanding belts: 3, Sanding belt dimensions: 5400 X 150/2620 X 1350, Belt 1Transverse sanding unit: yes, Band 1 Leistung kW : 13/17, Belt 2 shoe unit: yes, Band 2 Leistung kW : 13/17, Band 3 Kombiaggregat Walze/Schuh: Schuh, Band 3 Leistung kW : 13/17, Band 4 Kombiaggregat Walze/Schuh: Schuh, Band 4 Leistung kW : 13/17, Elektronische Tastung mm: yes, Separation of sampling in mm: 32, Frequency control of belts: no, Continous adjustable feeding speed m/min: 5-25, Constant table hight: yes, Vacuum table: yes, Brushing unit: yes, wast cleaning: EA 2, Year :1995
Manufacturer: Tagliabue, Type: PS 40 60, Year: 2001, Control: Siemens, Control: Siemens, Work piece width min-max mm: 20-350, Min.-max. workpiece height in mm: 10-60, Work piece length min-max mm: 450, Sanding hight mm: 60, Schleifaggregate links : 3, Schleifaggregate rechts : 3, Transverse sanding units: no, Profile sanding units: 3, Unit 1 tiltable: yes, Aggregat 1 kW: ca.1,2, Unit 2 slewable: yes, Aggregat 2 kW: 1,2, Unit 3 slewable: yes, Aggregat 3 kW: ca.1,2, Unit 4 slewable: yes, Aggregat 4 kW: ca 1,2, Unit 5 slewable: yes, Aggregat 5 kW: ca.1,2, Unit 6 slewable: yes, Aggregat 6 kW: 1,2, Number of frequency controlt belts: 5, Sanding belt speeds m/min: 5-15, Intermediate sanding of lacquer: yes, Shoes electr. controlled: yes, Constant table hight: yes, Brushing unit: 2, FREE TEXT: Maschinenbett rechts verfährt auf breite der Werkstücke, Year :2001
usava
Manufacturer: Heesemann, Type: LSM 8, Year: 2016, Control: PC 10,4 , Monting of the machine: Walze / Walze, Sanding width mm: 1350, Sanding hight mm: 0,5 - 100, Number of sanding belts: 2, Sanding belt dimensions: 2620 x 1350, Table hight adjustment by engine: no, Steel roller: 2, Band 1 Leistung kW : 45, Band 1 Schleifbandgeschwindigkeit m/s : 0,1 - 24, Band 2 Leistung kW : 37, Band 2 Schleifbandgeschwindigkeit m/s : 0,1 - 24, Belt 2 synchronous and reverse run: yes, Frequency control of belts: 2, Table hight adjustment by engine: no, Continous adjustable feeding speed m/min: 5 - 25, Vacuum table: yes, Brushing unit: 1,5 kW, Year :2016
