Fabricante:
(Categoria: 209)
racks: 17; support tube spacing: 60mm; rack length: 650mm; langth: 200 - 2000mm; rolls: Polyamid 4 Stück; depth: 870 - 1180mm; height: 198mm; safe load: 400kg; The user-friendly Varioflex drying rack is aspace-saving and gentle solution for storingpainted workpieces. The four swivel castorsmean that it can also be used for transportingworkpieces.Its solid tube frame design can be adjusted between200 mm and 2,000 mm.With 17 inside and outside plastic-coated supporttubes on each side, the rack can support up to400 kg of evenly distributed weight. The plug-in inside and outsidesupport tubes can be taken out and re-inserted as needed.When not in use, the drying rack can be collapsedand takes up minimal space.
Angle display: digital; Dimensions display of cut-to-length flaps: digital;
angle: 0° - 90°; max cutting length: 1370 mm; easy handling and quick mounting on the carriage of the sawfor fast and stepless production of miter cuts on narrow and short workpieces at any angle from 0° to 90
Tip width: 1200mm; Copy device: Yes; Motor power: 1.5kW; Speed: 870 / 1400 / 2100 rpm; Lots of accessories available!
Load capacity: 2000kg; electr. lifting: yes; electr. Driving: yes;
Carriage length: 2500 mm; Cutting width at the width stop: 1000 mm; Cutting width at cut-to-length fence: 3000 mm; Cut depth: 125 mm; Vorritzer: yes; Height and swivel adjustment saw blade: handwheel; Width stop adjustment: manual; Display Saw Blade Angle: Scala; Display cutting height: Scala; Display width stop: Scala; Display cutting ruler: Scala; Saw blade diameter: 400mm; Speeds: 4000 rpm; Motor power / saw: 4.4 kW; Engine brake: yes / automatic; Milling mandrel swivel: yes 0 - 45Â; Height and swivel adjustment of the milling mandrel: handwheel; Altitude and
Carriage length: 2500 mm; Cutting width at the width stop: 1200 mm; Cutting width at cut-to-length fence: 2500 mm; Cutting depth: 100 mm; Vorritzer: yes; Height and swivel adjustment saw blade: handwheel; Width stop adjustment: manual; Display Saw Blade Angle: Scala; Display cutting height: Scala; Display width stop: Scala; Display cutting ruler: Scala; Saw blade diameter: 300mm; Speeds: 4000 rpm; Motor power / saw: 4.4 kW; Engine brake: yes / automatic; Milling mandrel swivel: yes 0 - 45Â; Height and swivel adjustment of the milling mandrel: handwheel; Altitude and
Drive: electric 24V; Operating hours: 30; Pneumatic tyres rear axle: yes; Side broom: Yes / 2x; Cleaning area: 6000 - 16000m²; max area output: 6700m²/h; Working width without side brush: 800mm; Length: 1600mm; Width: 1080mm; maximum gradient: 10%; Operating hours: 30; Charger: included; Cleaning area: 6000 - 16000 m²Max. Area output: 6700 m²/hWorking width without side brush: 800 mmSpeed: 0 - 6 km/hLength (product): 1600 mmMaximum gradient: 10 %Width/depth (product): 1080 mmVolume of waste container:
Capacity: 25 and 40 kg/h; Briquette size: 50mm diameter; Briquette length: 20 - 40mm; Tank size: 0.38 m³; Power consumption: 4kW; Machine length: 1860 mm; Machine width: 890 mm; Machine height: 1100 mm; Weight: 400 kg;
Capacity: 40 and 60 kg/h; Automatic start: yes; Oil cooler: Yes; Briquette size: 50mm diameter; Briquette length: 35mm; Tank size: 0.38 m³; Power consumption: 5.5kW; Machine length: 1860 mm; Machine width: 890 mm; Machine height: 1100 mm; Weight: 400 kg;
power: 40 - 100 kg/h; briquette dimensions: 60 mm; briquette length: 40 - 70 mm; automatic start-up: yes; oil preheating system: yes; max moisture: 15 %; container diameter: 1000 mm; dimensions: 1850 mm x 1170 x 1510 mm (LxBxH); motor power: 7,5 kW; power panel: with PLC and touch screen Siemens; weight: 770 kg; The briquetting machine is suitable to compact:woodcorkrubberplasticyarn fluffnatural fibreemery powderscrapings from hidespapercoffee husketc.
Capacity: 15 - 55 kg/h; Briquette diameter: 55 mm; Container size: octagonal, diameter 750mm; Hopper height: Dimensions: 1500mm x 900mm x 1065mm (L x W x H); Motor power: 4 kW; Control cabinet: electronically controlled via PLC; Weight: 450 kg; The Nano briquette press is ideal for companies with small production. Due to the compact design, it is also possible to mount the press under an existing extraction system without great effort.
Capacity: 15 - 70 kg/h; Briquette diameter: 60 mm; Automatic start-up: Yes; Oil Preheating System: Yes; Material moisture: max 15%; Container size: octagonal, diameter 750mm; Hopper height: Dimensions: 1500mm x 900mm x 1065mm (L x W x H); Motor power: 5.5 kW; Control cabinet: electronically controlled via PLC; Weight: 450 kg;
hourly output: 10 - 25 kg/h; briquette: cube 30mm x 30mm; drum dimension: 0,33 m³; dimensions: 1300mm x 740mm x 1200mm (L x B x H); motor Power: 2,2kW; weight: 233 kg; Very compact construction and economic operation.
An old but fully functional IMA double-end profiler is available. Working width: 2000mm, max. cutting height: 35mm, machine dimensions X/Y/Z: approx. 4000mm/6000mm/3000mm, weight: approx. 3000kg. Documentation available. An on-site inspection is possible.
This LINCK VZM & CSMA was manufactured in 2018. It includes a CSMA pull-out device and a VZM centering device, both designed for high-performance in automated production lines. The CSMA offers flexible material guidance with a feed speed of 85 m/min, while the VZM provides precise centering at 84 m/min. Both units feature robust designs for demanding conditions and minimal use, ensuring excellent condition. Contact us for more information about this machine.
Casing press manufactured in 2001. This LIGMATECH Optimat MDE 10 features adjustable pressing forces applied both vertically and horizontally, ensuring precise operation. The machine allows for casing dimensions ranging from 300 to 2500 mm in length and 300 to 1300 mm in height. If you are looking to get high-quality casing capabilities, consider the LIGMATECH Optimat MDE 10 machine we have for sale. Contact us for further details.
The 2018 HOLZ-HER DYNESTIC 7535 standalone is a heavy-duty, 5-axis CNC machining center designed for professional woodworking and panel processing. Built for "nesting" (cutting and drilling sheet goods on a single machine), the "standalone" configuration operates as a single unit rather than a fully automated, conveyor-fed assembly line. Find more here - / Contact us at -
This WEBER LCE-2000-S-S1350 was manufactured in 2001. It features a wide-belt sanding machine with a working width of 1350 mm, a sanding unit plus a cleaning brush, and sanding shoes with pressure beam segment control. The cutting speed of the sanding belt is infinitely variable, and it has a 15 kW frequency-controlled drive. Maximum feed speed is 14 m/min. Contact us for more information about this machine.
Machining length: 6500mm, equipment: fencing, control cabinet, Hagen & Göbel spindle unit, power: 5.5kW S1/7.9kW S6, speed range: 100 to 6000/min continuously variable, tool holder: SK30/DIN69871 form A, drilling capacity in steel 60/aluminium: 18/20mm, thread in steel 60/aluminium: M14/M16, spindle throat: 150mm, vertically opening protective cabin, pneumatically movable up and down, operation via push button, coolant system emulsion AP3000/6500, delivery rate: 70l/min, tank capacity: 150l, support table with T slot strips size 16, ten clamping cylinders, support surface: 6500x330mm, equipped with ten double acting pneumatic cylinders (50x40), tool changer plate magazine, travelling plate magazine for eight tools, change time: approx. 8 to 10s, max. tool holder diameter: 50mm, max. length for tool holder with tool: 250mm, Heidenhain HR130 handwheel integrated in control housing, chip t ...
Torno automático de scantlings Fabricante: Hempel Modelo n.: VKR Para a produção de pequenas peças torneadas a partir de uma haste longa. Virar, curvar, separar-se é automático Material de partida / comprimento máximo da haste: 700mm Comprimento máximo de curva: 64 mm Diâmetro máximo de rotação: 64 mm
This IMA Novimat Systems I/R75/1000 edgebander was manufactured in 2005. It features a robust ICOS OPEN control system, a jointing milling unit with powerful motors, and a versatile multi-functional processing unit for detailed edge finishing. The machine includes a 32-position edge magazine and an advanced gluing unit with an automatic PU melting system. Consider the opportunity to buy this IMA Novimat Systems I/R75/1000 edgebander. Contact us for more information about this machine.
Alimentação redonda para madeira muito robusta e muito bem preservada faz o LINCK. Construído em 2011. Transportadores de corrente do deck 5 de alimentação, slider por passos com 4 passos. Comprimento máximo da madeira: 5,2 m. Adequada para madeira redonda de espessura média. Paredes laterais de cavalariça, incluindo subestrutura em aço. O sistema ainda é montado no local original.
Sistema de deteção de metais MesutroncType Metron 05 CO 900 incluindo correia transportadora Ano de fabrico 2011. Bobina de deteção de metais diâmetro 900 mm, incluindo tubo durit. Comprimento da correia transportadora cerca de 7.100 mm, com rolo cónico
Wood production line manufactured in 2006. This HUNDEGGER K2-4-450 features a maximum log length at infeed of 13 m and at outfeed of 12 m. The machine includes a fully automatic beam turning station and various cutting and drilling units for versatile operations. If you are looking to get high-quality timber framing capabilities, consider the HUNDEGGER K2-4-450 machine we have for sale. Contact us for further details.
Completa em versão padrão com: - Controlo eletrónico totalmente automático com Interruptor seletor de programa ENXAGUAR-COLA-COLA/ACIONAR - Alimentação por cavilhas via transportador vibratório eletrónico com potenciómetro para ajuste infinitamente variável da capacidade de transporte do cavilho - Controlo automático do diâmetro e comprimento da varilha com sistema Auto-DL-Selekt (ejeção automática de comprimentos incorretos das cavilhas +/- 5 mm para dentro do recipiente de recolha) - Sistema de cola fechada com pressão de cola de 6 bar via bico de cola para colas com viscosidade de 150 a 2.250 mPas - Ajuste de quantidade de cola eletrónica stepless com potenciómetro por meio da pré-seleção temporal por controlo eletrónico - Interruptor seletor de cola/água para enxaguar/limpar o sistema de cola com botão de função EasyClean (programa de limpeza auto ...
Edgebander manufactured in 2005. This IMA Advantage 600 features jointing cutters, a gluing unit for thin and thick edges, and a pressing zone. It includes two trimming units, flush trimming, and profile and surface scrapers for enhanced finishing. If you are looking to get high-quality edge banding capabilities, consider the IMA Advantage 600 machine we have for sale. Contact us for further details.
