Fabricante:
(Categoria: 1300)
Ergonomic handle for comfortable and easy control Compact and lightweight design Lightweight housing with rubber coating Integrated air regulator to adjust sanding speed 6 mm orbital diameter for ultra-fine finishes Automatic rear suction Auction-ID: A7-50799-177
dimensions: L105 x W55 x H161 cm, connection: 230 volts Auction-ID: A1-50060-72
Voltage converters are designed to transform direct current from batteries with a voltage of 12 V into alternating current with a voltage of 230 V. The device is equipped with a USB socket to power and charge mobile devices. Auction-ID: A7-50799-308
2268 Butts - various thicknesses of colours - detailed list attached Auction-ID: A1-50060-243
The torque wrench is a tool used to tighten threaded connections with a specific tightening torque. The wrench is made of CR-V steel, ensuring durability and strength. Auction-ID: A7-50796-216
1/2\" 450W electric impact wrench with 4 chrome-vanadium steel sockets of 17, 19, 21 and 22 mm Auction-ID: A7-50799-189
Hochdruck-Systeme HPTC130-300 ISO High-Pressure Testing System Manufacturer: Hochdruck-Systeme GmbH Model: HPTC130-300 ISO Year: 2011 Equipment type: High-Pressure Testing System Certification: CE marked Location: 91701 Trnava Industrial high-pressure testing system designed for pressure testing of components under controlled pressure and temperature conditions. Equipped with high-pressure test chambers, hydraulic power unit, pressure gauges, electrical controls and associated high-pressure tubing. Technical specifications: Working pressure: 1,300 bar Test pressure: 2,240 bar Chamber volume: 1.08 L Operating temperature range: 18–300°C Maximum clamping force: 15,000 kp Equipment: High-pressure test chambers Hydraulic power unit Pressure gauges Electrical control system Associated high-pressure tubing Condition: Used only a few times and reported to have been working when last use ...
Voltage converters are designed to transform direct current from batteries with a voltage of 12 V into alternating current with a voltage of 230 V. The device is equipped with a USB socket to power and charge mobile devices. Auction-ID: A7-50796-308
Two-stemmed Strelitzia (bird of paradise flower) with large, strong green leaves and an upright, loosely fanning growth habit. The plant stands in a light, sand-coloured decorative pot in a slightly conical shape and is covered with bark mulch. A real eye-catcher for conservatories, living areas, bright entrance areas or the terrace in summer. Details: Botanical Name: Strelitzia Height: approx. 150 cm Circumference: approx. 35 cm Shape: 2-stemmed Vessel: Decorative pot, sand-coloured, Ø approx. 36 cm Location: bright to sunny, in summer also outside, protected from frost Care: easy to care for, winter bright and frost-free at approx. 5 to 15 °C Important notes: The exact height, the state of health of the plant and the dimensions of the plant and decorative pot must be checked on site. It is a natural product, deviations in growth and shape are possible. Sale as viewed and ex site ...
Old olive tree (Olea europaea) with a mighty, gnarled trunk and characterful, deeply furrowed bark. The loosely grown, silvery-green crown hangs full of green olives. The tree stands in a large planter in terracotta look. An impressive solitary shrub for the garden, terrace, courtyard or entrance area. Details: Botanical Name: Olea europaea (Olive Tree) Height: approx. 200 cm Trunk circumference: approx. 110 cm Shape: Bonsai shape with a short, thick trunk and wide, naturally grown crown Special feature: old, gnarled stem, rich fruit hanging Container: Planter in terracotta look, Ø approx. 95 cm Location: sunny to full sun, as sheltered as possible Care: water moderately, avoid waterlogging, fertilise during the growing season, cut the crown in spring if necessary, protect the root ball and crown in case of severe frost Important notes: The exact height, the circumference of the t ...
The ratchet wrench features an actuation pin that holds the socket and a non-slip handle with deep knurling. 43-tooth ratchet mechanism. Chrome vanadium steel forging for strength and durability. Polished chrome surface for maximum corrosion protection. Auction-ID: A7-50796-214
press pressure: 1000KN, punching surface approximately: 2x L900 x W720 mm, equipped with motor-driven roller conveyor, 1x support infeed table, 1x oil pump generator, motor power: 7.5 KW, 1x Sigmatek ET 243 operator panel, 1x mobile extractor, and personal fencing protection with Sick laser curtain protection. Includes rack filled with leather dies and 2x green plastic plate Auction-ID: A1-50060-9
Pneumatic spray gun to be used in combination with a paint tank. Auction-ID: A7-50799-300
Metal tool box complete with all equipment as in the photo Overall dimensions: 450 x 400 x 200 mm Weight: 10 kg Auction-ID: A7-50796-364
Brand: Volvo Penta -MHMG Power :414KVA RPM : 1800 U/Min. Frequency : 60 Hz Voltage : 230/400 volts Engine: Volvo Penta D13 6Cylinder Turbo Diesel Operating hours:20000h Year of Make: 2014 Auction-ID: A1-50909-8
Execution: 130mm, including 2x box of snaps, nickel, bronze and black Auction-ID: A1-50060-166
Hydraulic cable crimping pliers. This tool will help you crimp wires and connectors much easier. Auction-ID: A7-50799-119
Pneumatic hose wound on a hose reel made of high-quality reinforced PVC. It is characterized by high resistance to high pressures. The hose reel is equipped with an automatic locking system that prevents unintentional winding of the hose and a hook that allows it to be hung on the wall. Auction-ID: A7-50799-106
32 € 
