máquinas e equipamentos para engenharia de processo usadas para venda (7,455)

Machine Specifications - Type: Double cone mixer - Capacity: approximately 1,000 kg - Control unit: circa 2005 Condition and Equipment - New paintwork - New storage blocks for mixing containers including bearings - Supplied without CE marking and documentation Find more here - / Contact us at -

FBM Hydraulics POWER hydraulic unit ; Voltage: 380 volts ; Power: 22 kW ; Capacity: 32 ltr/min Auction-ID: A1-45170-41

Manufacturer: LPW Model: PowerJet 670 T4-V Twin Year of Manufacture: 2010 Type of Machine : Cleaning System Cleaning Medium: Aqueous cleaner (water-soluble, pH 7-9) Technical Specifications • Standard basket size: 670 x 480 x 300 mm • Alternative: 2 stacks (3 baskets each, 480/430 x 320 x 110 mm) on angle frame (max height 300 mm) • Maximum batch weight: 200 kg (average approx. 150 kg) • Cycle time: approx. 5 to 10 minutes per batch • Total filling volume: approx. 2,600 litres • Supply voltage: 3 x 400 V / N / PE - 50 Hz • Control voltage: 24 V DC • Total connected load: 70 kW • Dryer heating power: 24 kW • Other bath heating power: 60 kW • Air exhaust: 240 to 480 m3/h • Fresh water pressure: approx. 3 to 4 bar • Compressed air connection: approx. 6 bar (min. 4.5 bar) • Machine dimensions (without loading): 4,500 x 2,400 x 2,500 mm • L ...

Manufacturer: Engel Model: Victory 330H/80L/110 Year of Manufacture: 2008 Type of Machine : Injection Molding Machine.Combi machine for 2-component injection molding (main cylinder is Ø 18mm thermoplastic and L-unit is a Ø 12mm LSR cylinder) Operating hours: 35995h Find more here - / Contact us at -

Manually operated Auction-ID: A1-43429-55

Manually operated Auction-ID: A1-43429-54

22 L tank, with lance. Never used Overall dimensions: 330 x 330 x 1000 mm Weight: 8 kg Auction-ID: A7-45833-238

Sandwich panel production line Type: KAM-LINE-SP-001 Manufacturer: Klei adhesive machinery Year: 2018 Total built-up area of ​​the line: 7 x 23 m Sandwich panel dimensions Width: 150 - 1500 mm Length: 250 - 2900 mm Thickness: 30 - 70 mm Press pressure approx.: 500 kg/m2 Heating temperature: 60 °C Electrical input up to 45 kW Power max.: 50 kW Optimal air pressure max.: 6-8 bar Electricity source 3 phases 400V, 50Hz Dimensions: 20000x6000x5000 mm Total weight: 10,000 kg The line enables the production of assembly panels in a semi-automated manner: simultaneous processing of multiple orders based on customer requests, already at the design stage, including preparation of the panel layout on the shipping pallet, the modular design of the line allows transfer between two or even three assembly tables, adhesive mixing and application are performed by an automatic ...

Diesel, capacity 220 lt, never used Overall dimensions: 900 x 700 x 700 mm Weight: 30 kg Auction-ID: A7-45834-261

Diesel, capacity 220 lt Overall dimensions: 900 x 700 x 700 mm Weight: 30 kg Auction-ID: A7-45834-11

Diesel, capacity 220 lt Overall dimensions: 900 x 700 x 700 mm Weight: 30 kg Auction-ID: A7-45833-11

Diesel, capacity 220 lt, never used Overall dimensions: 900 x 700 x 700 mm Weight: 30 kg Auction-ID: A7-45833-261

Diesel, capacity 220 lt, never used Overall dimensions: 900 x 700 x 700 mm Weight: 30 kg Auction-ID: A7-45834-183

Diesel, capacity 480 lt, never used Overall dimensions: 1000 x 800 x 700 mm Weight: 40 kg Auction-ID: A7-45833-158

Diesel, capacity 220 lt, never used Overall dimensions: 900 x 700 x 700 mm Weight: 30 kg Auction-ID: A7-45834-78

Diesel, capacity 480 lt, never used Overall dimensions: 1000 x 800 x 700 mm Weight: 40 kg Auction-ID: A7-45834-49

Diesel, capacity 480 lt, never used Overall dimensions: 1000 x 800 x 700 mm Weight: 40 kg Auction-ID: A7-45834-158

22 L tank, with lance. Never used Overall dimensions: 330 x 330 x 1000 mm Weight: 8 kg Auction-ID: A7-45834-238

Diesel, capacity 220 lt, never used Overall dimensions: 900 x 700 x 700 mm Weight: 30 kg Auction-ID: A7-45833-78

Diesel, capacity 480 lt, never used Overall dimensions: 1000 x 800 x 700 mm Weight: 40 kg Auction-ID: A7-45833-49

Diesel, capacity 220 lt, never used Overall dimensions: 900 x 700 x 700 mm Weight: 30 kg Auction-ID: A7-45833-183

Okta 6000 - New und with Motor Okta 1000 - neu without Motor 1. Pfeiffer Vacuum Okta 6000The Pfeiffer Vacuum Okta 6000 is a Roots vacuum pump (also known as a Roots blower or vacuum booster). It is designed for industrial applications that require high pumping speeds in low and medium vacuum ranges.Primary Function: It acts as a "booster" to increase the pumping speed of a vacuum system, usually paired with a backing pump (like a rotary vane or screw pump).Performance: It has a nominal pumping speed of approximately 6,000 to 7,300 m³/h. Find more here - / Contact us at -

Manufacturer : Nabertherm Model: N 875/65HA Year of Manufacture: 2015 Maximum Temperature: 650 degrees C Power Supply: 400 V / 50 Hz Current: 39 / 39 / 39 A Power Rating: 27 kW - Condition: This furnace is in like-new condition. Since arriving at the current facility in 2020, it has never been observed in operation. Employees report that it was used only two or three times at the very beginning. Find more here - / Contact us at -

Manufacturer: Hanel Type: Lean-Lift Model: 1300-825 Year of Manufacture: 2007 Drive Power: 5.5 kW Operating Mode: 100% ED Voltage: 400V, 3-phase, 50Hz Current: 12.0 A Max Container Load: 250 kg Average Container Load: 33 containers front / 34 containers rear Front Load Capacity: 250 kg Rear Load Capacity: 250 kg Find more here - / Contact us at -

Manufacturer: Durr Type: LTB RK 15 Type of Machine : Regenerative Thermal Oxidiser (RTO) Year of Manufacture: 2018 Complete internal rebuild: 2024 and 2025 Technical Specifications - Total Capacity: 15,720 Am3/h (2 x 7,860 Am3/h) - Flow Rate (Nm3/h): 12,622 - Inlet Temperature: 67 degrees C - Inlet Pressure: -5 hPa g - Humidity: 8 g/kg - VOC Concentration: 0 to 5,000 mg/Nm3 - VOC Composition: Ethanol and Ethyl Acetate - Heating Value: 26,800 kJ/kg - Particulate Matter at inlet: less than 3 mg/Nm3 - Si Compounds: 0 mg/Nm3 - Other Pollutants: 0 mg/Nm3 2024 and 2025 Internal Rebuild - Work Completed - New diamond stainless steel mesh installed - Dividing walls fully rebuilt - Fire bricks re-installed throughout - All cans fitted with new media blocks - New insulation modifications completed Find more here - / Contact us at -

Air Pollution Control Equipment - Camfil Multiple air pollution control units from Camfil, one of the world´s leading manufacturers of air filtration and clean air solutions. This lot includes items comprising a range of air filtration and pollution control devices. Additional units sourced from Trox Technik and Ziehl-Abegg , both respected names in air handling and fan technology. Electrical cabinets from Thalassa are also included . Air Humidity Control Equipment - Fisair A complete set of air humidity control units from Fisair,providing a range of humidification capacities suitable for controlled environments, pharmaceutical facilities, aboratories,and clean rooms. Industrial Chiller - Trane Sintesis Advanced One Trane Sintesis Advanced industrial chiller , a high-performance cooling unit from Trane, a globally recognised leader in HVAC and cooling technology. The Trane Sintesi ...

Manufacturer: Torusmill Model: TM-100 Year: 2004 The cooling circuit is not included Technical Specifications - Tank Volume: 100 L - Grinding Material Capacity: 40 - 70 L - Grinding Basket Volume: 4.3 L - Bead Fill Level 50%: 2.135 L - Main Motor Power: 15.0 kW - Motor Speed: 0 - 3,000 rpm - Shaft Speed: 100 - 2,000 rpm - Power Supply: 3 x 400 V / 50-60 Hz - Fusing: 3 x 50 A, 2 x 2 A - Total Weight: approx. 1,000 kg Find more here - / Contact us at -

This OGM 1.5 pellet production line is designed for processing straw, hay, alfalfa, miscanthus, compost,and other agricultural raw materials. The pellet press is also suitable for the production of wood pellets. The entire line has been dismantled and is ready for loading. Production Capacity - Maximum hourly output: up to 1300 kg per hour (material dependent) - Individual components such as the hammer mill can achieve higher hourly output Line Components - Pellet press 75 kW, year of manufacture 2013 - Elevator, year of manufacture 2013 - Pellet cooler with sieve, year of manufacture 2013 - Buffer tank with discharge for ground material, year of manufacture 2013 - 2 cyclones (centrifugal separators) with rotary valve, year of manufacture 2013 - 1 fan for radiator exhaust, year of manufacture 2013 - 1 new ring die and various used spare parts - 10 m feed table to bale unroller, year  ...

Manufacturer: DuPont Model: Cyrel Fast 1000TD Machine type: Thermal processor for flexographic plates Year of manufacture: February 2008 Fully refurbished and updated: December 2014 Condition: Used, ready for sale Extra Package Included The offer includes a stock of unused Cyrel flexo plates at no additional cost. - 9 Cyrel plates, reference EFXR 045, format 900 x 1200 mm - 26 Cyrel plates, reference DFR 067, format 635 x 762 mm - 30 Cyrel plates, reference DFR 045, format 635 x 762 mm Find more here - / Contact us at -