Fabricante:
(Categoria: 102)
Voltage: 380V, frequency: 50Hz, spindle power: 10hp continuous, 15hp for 30 minutes, amperage of largest motor: 40/60A, KA. DC gradation: 10, control: Mazak MAZATROL T-1, weight: 4.5t, with programming manual. An inspection on site is possible.
Heavy Duty Lathe Seiger SLZ 1200 x 3000with Siemens Sinumerik 810D Cycle Control (Teach-In)The heavy duty lathe Seiger SLZ 1200 x 3000 is equipped with a Siemens Sinumerik 810D cycle control (Teach-In). The machine was most recently used as a faceplate and frontal lathe and therefore operated without a tailstock and without steady rests. However, the machine can still be structurally equipped with appropriate steady rests or a tailstock and used for classic center work.Configuration with AC main drive, large faceplate, hydraulic unit, separate control cabinet, and 2 chip conveyors.Working AreaDistance between centers: 3,000 mmSwing diameter over bed: 1,200 mmSwing diameter over cross slide: 850 mmCross slide travel: 620 mmBed width: 750 mmSpindleSpindle nose: DIN 55027 size 11Spindle diameter front bearing: 190 mmSpindle bore: 104 mmSpeed range: 5 – 900 min⁻¹Max. torque: 6,000 NmMai ...
Gildemeister GMX 250S Centro Linear de Torneamento/Fresagem CNC Cobertura Maho DMG Hersteller [fabricante]: Gildemeister Deckel Maho DMG Tipo [ tipo]: GMX 250S Linear Unidade de controlo [de controlo]: Heidenhain Plus IT 3D CNC Pliot 4290 plus it Baujahr[ano de construção]: 12/2008 A classe principal de torneamento e fresagem! Dados importantes da GMX 250S Linear: • Centro de fresador de torneios de 7 eixos • Fuso principal e contra-fuso • Eixo B até 240 • Fresagem do eixo até 12.000 rpm • Revista de ferramentas até 80 lugares • Controlo Siemens 840D ou Heidenhain • Atuadores lineares para alta dinâmica e precisão • Diâmetro de maquinação aprox. 520–640 mm • Comprimento de torneio até aproximadamente 1.185 mm Equipamento típico: • Eixo Y • Ferramentas elétricas • Alimentador de barras • Arrefecimento de alta press ...
Centre height: 350mm, turning diameter: 700mm, spindle bore: 108mm, spindle speed: 13-1,000rpm. An on-site inspection is possible.
Fresh oil lubrication capacity: approx. 3l, voltage: 400V, frequency: 50Hz, fuse protection (slow-blow) according to VDE 0100: 80A, permissible voltage fluctuation at 400V: ±10%, connected load: 44kVA, length: 3210mm, width: 1750mm, height: 1750mm, weight: approx. 4.6t, with chip conveyor. An on-site inspection is possible.
This 7-axis TRAUB TNC 65 DGY was manufactured in 2009. It features a powerful tool drive turret with a speed of 4000 rpm and a high-pressure coolant system with programmable pressure stages. The machine is designed for machining metals and plastics, equipped with a C-axis for numerically controlled turning and positioning. If you are looking to get high-quality turning capabilities, consider the TRAUB TNC 65 DGY horizontal turning machine we have for sale. Contact us for further details.
Multi-spindle turning machine manufactured in 1992. This Mazak Quick Turn 18 NSP features a maximum turning diameter of 260 mm and a turning length of 500 mm. It includes a tool turret with 8-fold / 16 positions and a spindle speed range of 36 - 3,600 rpm. If you are looking to get high-quality turning capabilities, consider the Mazak Quick Turn 18 NSP machine we have for sale. Contact us for further details regarding this machine.
Centro CNC de torneamento e fresagem Okuma Multus B300 Controlo: OSP-P200L Ano de Fabricação: 2007 Máquina interna nº 60 Viagens: Eixo X 690 mm Eixo Y 230 (-115 a +115) mm Eixo Z 1.545 mm Eixo B 0,001 ° Eixo C 360° Eixo W: 1.550 mm Diâmetro máximo de rotação: 710 mm Montada: HSK 63 Total de estações de ferramentas: 40 localizações Velocidade do fuso: 38 – 3.800 rpm Equipamento / Acessórios - Transportadores de cavacos - mandilha de 3 mandíbulas SMW KNCS-N-260-72 - Sistema de filtro de fita de papel compacto 500l - IGF One Touch
À venda Doosan Multi Tarefa CNC tipo centro de torneamento MX2100LST com controlador Fanuc 31i-A. Este Doosan MX2100LST é um centro de torneamento/fresagem CNC multifuncional de alta qualidade e 9 eixos. A máquina combina as funções de um centro de torneado CNC e de maquinação numa única fixação (torneia-fresagem). Capacidade e Área de Trabalho Diâmetro máximo de rotação: 540 mm Comprimento máximo de giro: 1.540 mm Diâmetro máximo sobre a bancada: 750 mm Diâmetro máximo sobre o eixo de empuxo: 650 mm Fusos (fuso principal e contra-fuso) Ambos os fusos oferecem desempenho idêntico e, assim, permitem a transferência e maquinação simétricas das peças: Tamanho da placa de elevação: 8 polegadas (opcional 10 polegadas) Velocidade máxima: 5.000 rpm Potência do motor do fuso: 22 kW Diâmetro máximo do eixo / Diâmetro máximo da haste: 65 mm. Resol ...
Voltage: 380V, current consumption: 125/118A, control system: Philips B2T 6, equipment: hydraulically actuated turret vorhanden, enclosed working area with slant bed geometry, hydraulic clamping system, piping, condition: fully functional, very good mechanical condition, visually well maintained, partially overhauled, tool turret: angular position encoder completely renewed, turret indexes absolutely faultlessly and precisely according to the data sheet, CNC control system: power supply professionally overhauled, main spindle drive: power section/drive completely overhauled, with power chuck and base jaws. An on-site inspection is possible.
-Mestre da Guilda -N.E.F. CT40 -N.º: 09213 -Ano: provavelmente por volta de 1985 -Horário de funcionamento: aproximadamente 27.500 -incluindo transportador de chips -incluindo armário de oficina com conteúdos para Gildemeister NEF CT40 --> Construção metálica, cor: verde com tiras de pega pretas, 7 gavetas, conteúdo: aços de torno, placas de carboneto, gabaritos, etc. Envio disponível mediante pedido. Venda apenas a comerciantes. Preço de compra declarado = líquido mais 19% IVA = €4.998,00 bruto
-Hamlet -E50/1 -N.º: 474 -Ano: 1996 -Horário de funcionamento: aprox. 22.400 -Controlo Voest-Alpine Steinel (pelo qual o controlo é provavelmente por separado. PC de secretária) -Inclui transportadora de cavacos, vários porta-ferramentas e ferramentas Envio disponível mediante pedido. Venda apenas a comerciantes. Preço de compra indicado = Líquido mais 19% IVA = €9.282,00 Bruto
À venda está um centrifugador central de torneado CNC de alta qualidade TC77-SMCY com controlo Siemens Sinumerik. A máquina está equipada com: Eixo Y Eixo C Sub-fuso Ferramentas elétricas Transportador de cavacos Pacote extenso de ferramentas Dados técnicos: Passagem de barras 77 mm Torre VDI50 de 12 velocidades Fuso principal ASA 8 ASA 6 Sub-spindle Velocidade até 4000 rpm Diâmetro de rotação aprox. 500–690 mm Comprimento de torneio aproximadamente 800–900 mm Eixo Y ±60 mm Principal e subfuso Peso aprox. 6000–7000 kg Nloc Egsy Uwmws S Rrgob
Control system: Philips B2T, machine currently not operational, partially dismantled, the fan of the main spindle motor has been completely renewed, the main drive and the mechanical assemblies (headstock, turret, ball screw) are intact, the Z-axis motor is defective and has already been professionally removed, the hydraulic clamping cylinder requires repair or must be replaced. An on-site inspection is possible.
Offered is a slant bed CNC lathe. Bar capacity: 65mm, travel X/Z: 160mm/510mm, control system: Siemens Sinumerik. Equipped with bar loading magazine. Weight: approx. 3500kg, overall dimensions X/Y/Z: approx. 2800mm/1800mm/1900mm. Inspection possible by arrangement. Expected to be available starting February 2027.
Offered is a conventional lathe. Center height: 190mm, swing diameter over bed: 380mm, speed range: 27-1000rpm, speed stages: 12, thread types: metric, Whitworth, module, feeds: Norton gearbox, spindle mount: bayonet, operation: manual, control system: manual. Equipped with 3-jaw chuck, chuck guard with safety screen, four-position tool holder, lead and feed screw cover. Weight: approx. 1200kg, overall dimensions X/Y/Z: approx. 2000mm/1000mm/1300mm. Inspection possible by arrangement.
This 4-axis SPINNER TC800 was manufactured in 2009. It features a radial turret and is equipped with Siemens control, ensuring reliable operation. With approximately 1,000 operating hours, this machine has been barely used. If you are looking to get high-quality turning capabilities, consider the SPINNER TC800 horizontal turning machine we have for sale. Contact us for further details.
Power supply: 75A, connected load: 35kW, control system: Traub SYSTEM TX 8F, weight: approx. 4.5t, operating hours: 84,126h, the machine has problems when machining inclined surfaces. An on-site inspection is possible.
Offered is a cam-controlled automatic lathe. Bar capacity: 29mm, speed range: max. 3750rpm, main drive: incrementally adjustable via change gears, number of tool slides: 4, control: cam control. Equipped with bar loading magazine, coolant device, tool turret, various tool holders, change gear set. Note: Sale is without extraction system. Weight: approx. 2200kg incl. magazine, overall dimensions X/Y/Z: approx. 5500mm/1300mm/1750mm. Inspection possible by arrangement.
A CNC production turning machine is offered. Working area bar capacity: 65mm, max. turning length: approx. 150mm, tool turret: 14 stations, control: C200. Equipped with automatic bar feeder magazine (type MBF), chip conveyor with integrated coolant cleaning system, compressed air connection, hydraulic chuck, signal light. Weight: approx. 5500kg, overall dimensions X/Y/Z: approx. 8500mm/2100mm/2200mm (incl. loading magazine). Inspection possible by arrangement.
A cam-controlled automatic lathe is offered. Working area bar capacity: 60mm, turret: 6 stations (axial), cross slides: 4 (radial), control: mechanical cam control. Equipped with bar guiding device, foldable safety cover, integrated coolant system, chip tray, various tool holders. Weight: approx. 2350kg, overall dimensions X/Y/Z: approx. 2100mm/1250mm/1750mm (dimensions without bar guide). Inspection possible by arrangement.
This 3-axis DMG NEF 600 was manufactured in 2012. It features a turning length of 1200 mm and a powerful integrated spindle motor with a maximum spindle speed of 3500 rpm. The machine includes a 12-station disc turret and live tooling capabilities for enhanced versatility. If you are looking to get high-quality turning capabilities, consider the DMG NEF 600 horizontal turning machine we have for sale. Contact us for further details.
Turning diameter over bed: 600mm, turning length: 1000mm, spindle head: 8, spindle bore: 63mm, tailstock quill size: MK5, gap: yes, faceplate diameter: 500mm, machine dimensions X/Y: 2800mm/1100mm, weight: approx. 2200kg. Including quick-change tool holder Multifix C, faceplate and coolant device. The front guide of the machine is worn and the feed in the apron is blocked. The bed slides can be moved via the lead screw. Documentation available. An on-site inspection is possible.
EMAG VTC 250 Torno vertical GERAL Projeto nº: 906007 Quantidade: 1 peça. Fabricante: EMAG Tipo: VTC 250 Controlo: Siemens 840 D Ano de Fabricação: 2008 Condição: Máquina usada Máquina de Camadas Aprox. (Hrs): 2 camadas DESCRIÇÃO VIRAGEM Comprimento máximo de curva 630 mm Diâmetro máximo do mandil 200 mm Velocidade máxima do fuso principal 5000 1/min Máximo de eixo principal de potência em ED 10-40/100% 38/29 kW Binário máximo do eixo principal em ED 10-40/100% 250/200 Nm Cilindro de fixação total no eixo principal Contramão controlado por NC Revólver à esquerda Número de estações/alimentadas por 11/11 Suporte de ferramentas na torre VDI 40 Eixos na torre X/Z Velocidade máxima de travessia rápida em X/Y/Z 30/-/40 m/min Revólver à direita Número de estações/alimentadas por 11/11 Suporte de ferramentas na torre VDI ...
This 7-axis Index ABC horizontal turning machine was manufactured in 2012. It features a main spindle with a maximum speed of 6000 rpm and a sub spindle with a speed of 4500 rpm. The machine includes two turrets, each equipped with X and Z axes, and a powerful tool drive. If you are looking to get high-quality turning capabilities, consider the Index ABC machine we have for sale. Contact us for further details.
Torno 1 L+Z Marca: VDF-Oerlikon Boehringer Modelo; PRAZO 560 Ano de Fabricação: 1986 Diâmetro de rotação sobre a cama: 570 mm Comprimento de viragem: 1000 mm Intervalo de velocidade: 11,2 - 2240 rpm Peso da máquina: 3,8 toneladas. Acessórios / equipamento: ecrã digital, proteção com chip. Tampa da correia transportadora, Dispositivo de refrigeração, giro rápido.
This 4-axis HAAS DS-30SSY was manufactured in 2013. It features Y-axis milling capability, a sub-spindle, and live tooling, enhancing its versatility for various machining tasks. The machine includes a 12-station bolt-on turret and comes equipped with a chip conveyor and mist collector. If you are looking to get high-quality turning capabilities, consider the HAAS DS-30SSY horizontal turning machine we have for sale. Contact us for further details.
Key data: 324 mm, 600 mm
Controlo: HEIDENHAIN CNC Pilot 4290 Velocidade máxima do fuso: 5.000 1/min Eixo C Máximo de passagem de compasso: 65 mm Curso: X= 260, Z= 630 mm Torre de 12 estações (tudo conduzido, máximo 4.500 rpm) Contramão Curso do contraponto: 580 mm Transportador de cavacos Dimensões LxLxH: 3500 x 2440 x 2100 mm (sem transportador de chips) Peso: 6.000 kg Horas de ligação: 32.600 h Horas do fuso: 7.600 h
Torno de banha Comprimento de torneio aproximadamente 2000 mm Diâmetro de rotação aproximadamente 1100 mm altura central aprox. 450 mm sem mesa de máquina Fio básico M 55 com adaptador M 33 para mandril padrão com 5 placas faciais de 100 a 600 mm de diâmetro foi usado para tornear moldes para uma fundição. Peso aprox. 2800 kg
