tornos usadas para venda (2,997)

faceplate diameter: 1200 mmswing diameter: 1600 mmturning height: 1250 mmslide adjustment: 800 mmControl: Siemens type: 840 cpower capacity: 56 kW: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 3500 mmturning diameter: 4000 mmcentre distance: 16000 mmturning speeds: 0,71-33,5 U/minRest: 2 tailstock quill taper MT: max. workpiece weight -without tailstock: 6300 kgmax. workpiece weight between centres: 18000 kgPlate area: mmtotal power requirement: 31 kWweight of the machine ca.: 60 tdimensions of the machine ca.: 22x5x4 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 1100 mmturning diameter over slide rest: 650 mmturning length: 3500 mmspindle bore: 108 mmfaceplate: 1000 mmsteady: 500 Control: Siemens type: 840 D bed width: 750 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: 6,5x2x1,8 mChip conveyor can be purchased as an option for €7,500The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 1440 mmturning diameter over slide rest: 960 mmturning length: 8200 mmfaceplate: 1250 mmbed width: mmturning diameter in the gap: 1460 mmlength of gap: 460 mmturning speeds: 1,8-400 U/minsteady: workpiece weight: 22000 kgtotal power requirement: 46 kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 3200 mmswing diameter: 5100 mmturning height: 2505 mmcross rail - adjustment: 1500 mmmax. ram stroke: 1250 mmslide adjustment: 2000 mmcontrol: Siemens 8 T tool changer: 16 STK table load: 60 tfaceplate turning speed range -stepless-: 0,8-100 U/minfeed: 0,0 1-1000 mm/minrapid traverse: 6000 mm/mindrive of main spindle: 75 kWweight of the machine ca.: 70 tdimensions of the machine ca.: 9,3 x 6,1 x 6,0 mmachine is in an excellent conditionwith div. acessories (photos available)machine can be equipped with latest electrics and Siemens CNC control SINUMERIK 840D sl for additional costs.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0360 mm: 215 mm: 1000 mm: 180 mm: 45 mm: 3,75 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0350 mm: 196 mm: 0650 mm: 170 mm: 42 mm: 7,5 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0360 mm: 215 mm: 1000 mm: 180 mm: 45 mm: 2,25/3,25 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0460 mm: 1500 mm: : 230 mm: 78 mm: 400 mm: 2200 U/min : D1-8 DIN 55029 : 95 mm: 145 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0330 mm: 210 mm: 0635 mm: 167 mm: 40 mm: 2,2 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0390 mm: 240 mm: 1000 mm: 190 mm: 54 mm: 5,5 kW

: 0400 mm: 1250 mm: : 200 mm: 55 mm: 315 mm: 2700 U/min : D1-6 DIN 55029 : 73 mm: 140 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0560 mm: 390 mm: 2000 mm: 280 mm: 80 mm: 9,5 kWspindle turning speed - stepless: 18-1800 U/minspindle taper: DIN 55029/D1-11 0The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 250 mmturning diameter over slide rest: 145 mmturning length: 550 mmturning speeds: 50 - 2000 U/mincentre height: 125 mmspindle bore: 26 mmtailstock quill taper MT: 2 MKconnected load frequency: 230 Vtotal power requirement: 0,75 kWweight of the machine ca.: 0,12 tdimensions of the machine ca.: 1,3 x 0,65 x 0,6 mlongitudinal feed.3-jaw chuck 125 mm.4-way steel holder.chip tray, bulkheadHardened bed tracks.Emergency stop switch.lining protectionTool box, instruction manual.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 290 mmturning diameter over slide rest: 170 mmturning length: 750 mmturning speeds: 75 - 2000 U/mincentre height: 145 mmspindle bore: 38 mmtailstock quill taper MT: 3 MKtailstock quill stroke: 80 mmconnected load frequency: 230 Vtotal power requirement: 1,5 kWweight of the machine ca.: 0,34 tdimensions of the machine ca.: 1,3 x 0,75 x 0,7 mLongitudinal and transverse feed.3-jaw chuck 160 mm.4-jaw chuck 160 mm.faceplate4-way steel holder with 4 pcs tool holders2 pcs. bezelsMachine lightDrip trayHardened bed tracks.Emergency stop switch.Feed protectionSet of wheels.Machine tools.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 360 mmturning diameter over slide rest: 220 mmturning length: 1000 mmturning diameter in the gap: 380 mmturning speeds: 70 - 2000 U/mincentre height: 180 mmspindle bore: 50 mmtailstock quill taper MT: 3 MKconnected load frequency: 230 oder 400 Vtotal power requirement: 1,8 kWweight of the machine ca.: 0.65 tdimensions of the machine ca.: 2,0 x 0,8 x 1,56 mProfessional industrial machine3-axis digital display3-jaw chuck 180 mm.4-jaw chuck 200 mm.Faceplate 280mmBezel fixedBezel rotating4-fold steel holder.Halogen machine lightMachine lightFoot brakeremovable chip tray, chip protection wallHardened and ground bed railsComplete coolant systemFeed protectionMachine toolsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: max. 420 mmturning length: 1250 mmcontrol: INDEX, C 200-4 D swing diameter: 630 mmtravel x1: 320 mmtravel z1: 1250 mmtravel x2: 170 mmtravel z2: 1250 mmtravel x3: 320 mmtravel z3: 1250 mmmain spindle speed: max. 3000 U/minmain spindle drive: 53 kWspindle passage: 102 mmspindle head: DIN 55026 Gr. 11 max. torque on the spindle: 675 Nmsub spindle - spindle speed range: max. 3000 U/minsub spindle drive: 53 kWsub spindle - spindle passage: 102 sub spindle - spindle head: DIN 55026 Gr. 11 sub spindle - spindle torque: 675 Nmtravel sub spindle: 1250 mmfeed power: X1 14000/Z1 14000 Nrapid traverse: X1 20/Z1 40 m/minfeed power: X2 8600/Z2 14000 Nrapid traverse: X2 20/Z2 40 m/minfeed power: X3 14000/Z3 14000 Nrapid traverse: X3 20/Z3 40 m/minnumbers of turret head positions: Rev. 1 = 12 numbers of turret head positions: Rev. 2 = 10 numbers of turret head positions: Rev. 3 = 12 n ...

turning diameter: 500 mmturning length: 1500 mmcontrol: MONFORTS CONTROL control: SYSTEM EURO TURN turning diameter over bed slide: 290 mmspindle bore: 70 mmspindle turning speed range: 3 - 2800 U/minspindle power: 15 kWmax. torque on the spindle: 1530 Nmspindle head: DIN 55027 Gr. 8 feed power X/Z axis: 11300 Nrapid travel - longitudinal/face: 10 / 5 m/minbed width: 360 mmtravel of cross-slide: 265 mmupper slide travel: 140 mmturning tool - shaft cross cut: 32 x 25 mmtailstock quill diameter: 80 mmtailstock quill stroke: 160 mmtailstock taper MT: 5 total power requirement: kWweight of the machine ca.: 3,3 tdimensions of machine L x W x H: 3,45 x 1,65 x 1,93 mAccessories: 3-jaw chuck ROTA-S plus 250 mmø, 4 pos. toolholder PARAT, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 410 mmturning diameter over slide rest: 240 mmturning length: 1000 mmcentre height: 205 mmcentre distance: 1000 mmspindle bore: 47 mmspindle turning speed range: 28 - 1250 U/minfeeds - longitudinal: 0,03 - 8,8 mm/Ufeeds - cross: 0,006 - 1,84 mm/Uthread - mm pitch: 0,25 - 76 mmthread - inch: 1/2 - 152 Gg/thread - module: 0,25 - 22 mmbed width: 320 mmtailstock quill diameter: 55 mmtailstock taper MT: 4 face slide travel: 290 mmupper slide travel: 120 mmtotal power requirement: 5,5 kWweight of the machine ca.: 1,3 tdimensions of machine L x W x H: 2,32 x 1,15 x 1,22 mAccessories: 3-jaw chuck RÖHM 160 mmø, MULTIFIX-head with 2 inserts, solid steady, running center, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Altura central: 400 mm Largura central: 1250/1300 mm Ø circunferencial: sobre a cama 440 mm Furo do eixo: Suporte do fuso: Pick-up cone tailstock: 5 MK Velocidades do eixo: 11,2 - 2240 rpm Alimentação: longitudinal/plana 0.1-2.8/0.05-1.4 mm/rev Pitches de tópicos: Conexão elétrica: 380 V, 11 kW Requisito de espaço: 3400 x 1400 x 1300/1700 mm Peso: aprox. 2700 kg

Altura central: 300 mm Largura central: 1000 mm Ø circunferencial: sobre a cama 610 mm Furo do eixo: 71 mm Suporte do eixo: tamanho 8 Pick-up cone tailstock: 5 MK Velocidades do eixo: aprox. 11,2 - 1800 rpm Alimentação: longitudinal/plana 0.014-16/0.063-7 mm/rev Inclinações de rosca: 0.1 - 112 mm Conexão elétrica: 380 V, aprox. 5,5 kW Requisito de espaço: 2900 x 1450 x 1750 mm

controlo: FANUC 21i-TB Eixo x de controlo: 390 mmeixo z: 780 mmcone do eixo: A2-11 número de velocidades do eixo: 2000rpm potência do motor: 37 kWpeso da máquina ca.: 9000 kgdimensões da máquina ca.: 1905,0 × 2720,0 × 3260,0 m

swing dia.: 440 mmmax. turning diameter: 220 mmturning length: 450 mmtravel -x axis: 200 mmcontrol: Fanuc 18i-TB max. helix angle: 60 °spindle bore: 64 mmtool taper: VDI 30 numbers of positions in the tool changer: 12 CNC Lathe | COLCHESTER - TORNADO T6MSequipped with counter spindle and chip conveyor.The machine is in a well-maintained condition.Please refer to further technical details in the attachement of the offer.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: T6 MS | T6-MS | T 6MS | T-6MS | T-6The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bar material dia.: 75 mmmax. max. swing dia.: 540 mmturning length: 650 mmcontrol: FANUC Oi-TB machine weight ab.: 6.200 kgCNC Turning- and Milling Center | JOHNFORD - SL-50-CF-Yequipped with chip conveyor.Additional equipment:+ C axis+ Y axis+ driven toolsThe machine is in good condition.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: SL 50 | SL50 | SL-50 CF Y | SL50 CF YThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. swing diameter over bed: 510 mmmax. turning diameter: 260 mmMax. Turning length: 540 mmtravel -x axis: 240 mmcenter height over bed: 260 mmcontrol: FANUC 21i-TB spindle bore: 77,5 mmno. of tools in turret: 12 xtool taper: VDI 40 CNC Lathe | COLCHESTER - TORNADO T8The machine is in good condition.Please refer to further technical details in the attachement of the offer.A machine video will be shared on request.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: T 8 | T-8The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: max. 480 mmturning length: max. 2.000 mmcontrol: Sinumerik 840 D Siemensswing diameter max. over bed cover: 520 mmMain spindle:: turning speed range - main spindle: 7 - 2.800 min/-1transmission ratio: 2 power capacity - main spindel: 53 kWmax. Torque: 3.456 Nmspindle nose: 11 DIN 55026chuck diameter: 315 mmspindle bore: 103 mmusable bar diameter: 82 mmaxis stroke:: x-travel: 405 mmz-travel: 2.049 mmTailstock:: diameter of quill: 100 mmquill stroke: 100 mmtension force: 14 kNcapture: 30 DIN 2079feeds:: rapid traverse: 10 m/minWorking speed: 0,1 - 10.000 mm/minfeed power: 15 kNTool Mount:: number of toolpositions: 12 pos.driven statition: 6 pos.Shank diameter: 50 mmpower capacity: 5,4 kWMax. Speed: 2.500 / 625 min/-1max. Torque: 25 / 100 Nmtotal power requirement: ca. 50 kWweight of the machine ca.: 14 tdimensions of the machine ca.: 6,4 x 3,8 x 3,0 mDocuments: Chip ...

Controle Siemens Sinumerik 840D Passagem da barra 65 mm Velocidades 5.000 min-1 2 x revólver de 12 velocidades com revólver acoplado Concorrência. Torreta 1 com eixo Y Instalação de recolha de peças Sistema de filtro de correia Transportador Revista de carregamento de barras IRCO Profimat

Key data: 350 mm, 1000 mm

KERN mais antigo e muito bem preservado com guia de cama frontal rebaixada

turning diameter: 250 mmturning length: 510 mmcontrol: Fanuc I Series total power requirement: 12 kWweight of the machine ca.: 4 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diâmetro de giro sobre a cama: 32 mmfaixa de velocidade de giro do eixo: 8000 U/minpassagem do eixo: mmcomprimento de giro: 320 mmControlo: Fanuc 0i-TC necessidade de potência total: kWpeso da máquina ca.: 3,5 tdimensões da máquina ca.: 2,63 x 1,3 x 1,8 m