Fabricante:
(Categoria: 102)
This MORI SEIKI SL 25 was manufactured in 1989. It is a horizontal turning machine equipped with a three-jaw chuck, dead-collet head, chip conveyor, and tailstock. Clamping wedges for tools are also included. Consider the opportunity to buy this MORI SEIKI SL 25 horizontal turning machine. Contact us for more information.
This 3-axis DMG MORI Gildemeister CTV 250 2nd was manufactured in 2016. Ideal for precision vertical turning, this machine maintains robust construction and reliability. If you are looking to get high-quality turning capabilities, consider the DMG MORI Gildemeister CTV 250 2nd machine we have for sale. Contact us for more information.
This Monforts KNC 6 S was manufactured in 1999. A robust horizontal turning machine featuring a maximum turning diameter over bed of 650mm and a maximum turning length of 2,000mm. It includes an R&D control unit, enhancing its operational capabilities. If you are looking to get high-quality turning capabilities, consider the Monforts KNC 6 S machine we have for sale. Contact us for more information.
This 3-axis CMZ TTL-66-66-TTY-T2Y was manufactured in 2021, offering advanced horizontal turning capabilities. Ideal for complex and precise metalworking tasks, this machine ensures efficient production with its robust design and modern technology. If you are looking to get high-quality turning capabilities, consider the CMZ TTL-66-66-TTY-T2Y machine we have for sale. Contact us for more information.
This 5-axis Matec 30 HV mill-turn centre was manufactured in 2010. It features a traveling column with 3,000 mm X-axis travel, 600 mm Y-axis, and 800 mm Z-axis. The B-axis swivels ±105° and the C-axis rotates 360°, supporting complex geometries. Equipped with a Bosch Rexroth IndraMotion 10 control unit and a rotary table speed of 500 RPM, it enables precise turning and milling operations. For more information about this mill-turn centre, please reach out to us.
This Tornos DECO 10e was manufactured in 2010. A Swiss type turning machine featuring a movable headstock, directional spindle stop, and independent counter spindle. It includes a loading magazine with drum and an integrated 25-liter hydraulic unit. Ideal for precise small-scale turning, this machine also supports bar sizes from 1 to 10 mm without preparation up to 8 mm. Contact us for more information about this machine.
This Pinacho Smart Turn 180/42 1000 was manufactured in 2012. A robust horizontal turning machine featuring a turning length of 1000mm, spindle clearance of 42mm, and a turning diameter of 360mm. It includes an 8-fold tool changer and Fagor 8055tc control. Dimensions are 2.5 x 1.15 x 1.65 m, weighing approximately 1.2t. Consider the opportunity to buy this Pinacho Smart Turn 180/42 1000 horizontal turning machine. Contact us for more information.
This Gildemeister TWIN 32 horizontal turning machine was manufactured in 2000. It features a Siemens control unit, a bar passage with a maximum diameter of 32mm, and a bar loading magazine IRCO with a length of 3000mm. Additionally, it includes a chip conveyor and a parts pick-up device. If you are looking to get high-quality turning capabilities, consider the Gildemeister TWIN 32 machine we have for sale. Contact us for further details regarding this machine.
This 2-axis DMG GILDEMEISTER CTX 320 linear V3 was manufactured in 2004. A versatile turn-mill centre, it offers robust construction and precision for complex machining tasks. If you are looking to get high quality turning and milling capabilities consider the DMG CTX 320 linear V3 machine we have for sale. Contact us for more information.
This 3-axis Okuma LB300-10000 MC was manufactured in 2003. It features a turning diameter of 340 mm, turning length of 1,000 mm, and 12 tool positions. Includes a chip conveyor and has been used in single-shift operations. Consider the opportunity to buy this Okuma LB300-10000 MC horizontal turning machine. Contact us for more information.
This Romi C 510 was manufactured in 2014. It features a milling spindle with ISO 50 taper, automatic tool clamping, and hardened guide surfaces. The machine operates with a standard spindle speed range of 56-2800 and includes automatic lubrication and cycle functions for efficient operation. If you are looking to get high-quality turning capabilities, consider the Romi C 510 machine we have for sale. Contact us for more information.
This Tornos Deco 10 was manufactured in 2005. A swiss type turning machine featuring a drum with loading magazine, a filter with a 25-liter capacity, and an integrated hydraulic unit. It supports various bar diameters up to 8 mm, ensuring versatility for precision work. Consider the opportunity to buy this Tornos Deco 10 swiss type turning machine. Contact us for more information.
This 3-axis EMCO MaxxTurn 65 SMY was manufactured in 2014, featuring a robust FANUC 31i B control system and a dual spindle setup with C and Y axes for complex machining. It includes a 12-position tool turret and a bar feeder with a capacity of 65 mm diameter and 3200 mm length. Ideal for precision turning and milling, this machine offers a comprehensive solution for advanced metalworking. Contact us for more information about this machine.
This 4-axis DMG CTX 420 Linear V6 was manufactured in 2002. It features a Siemens 840D Powerline control, VDI 40 tool holder, Y-axis, chip conveyor, and a counter spindle. The machine has been fully overhauled by Eichten Werkzeugmaschinen GmbH, ensuring it is in perfect condition. If you are looking to get high-quality turn-mill capabilities, consider the DMG CTX 420 Linear V6 machine we have for sale. Contact us for more information.
This TORNOS DECO 10e was manufactured in 2007. A Swiss type turning machine featuring a movable headstock, directional spindle stop, and multiple tool holders for versatile operations. Includes an independent counter spindle, lubrication device, and a loading magazine with drum. Ideal for precision turning with a lathe capacity of 10 mm. Consider the opportunity to buy this TORNOS DECO 10e Swiss type turning machine. Contact us for more information.
This SPINNER MT 350/750 was manufactured in 2002. A robust horizontal turning machine featuring a travel distance of X 155 mm and Z 800 mm, a circulation diameter over bed of 350 mm, and a turning length of 750 mm. Powered by a 9/11 kW drive and controlled by SINUMERIK 810 D, consider the opportunity to buy this SPINNER MT 350/750 horizontal turning machine. Contact us for more information.
This 3-axis HULLER HILLE DVH 150 Duo vertical turning machine was manufactured in 1999. It features a maximum turning diameter of 160 mm and a swing diameter of 200 mm. Equipped with a Siemens 840D CNC control, it offers high precision and efficiency with speeds up to 7500 rpm and rapid traverse rates up to 60,000 mm/min. Ideal for complex turning tasks, the HULLER HILLE DVH 150 Duo machine we have for sale. Contact us for further details.
This Goodway GLS-150 was manufactured in 2018. A robust horizontal turning machine featuring a FANUC 01-T control system with a 10.4 LCD and Manual Guide functionality. It boasts a spindle speed of 60-6000 RPM and a maximum bar capacity of 51 mm. Equipped with a high-precision linear guide on all axes, a 12-station turret, and a reinforced coolant pump for enhanced performance. If you are looking to get high-quality turning capabilities consider the Goodway GLS-150 machine we have for sale. Contact us for more information.
This HWACHEON TTC-10 horizontal turning machine was manufactured in 2015. It features a swing over bed of à 500 mm, a maximum machining diameter of à 400 mm, and a maximum machining length of 203 mm. Equipped with a Fanuc Oi-TF Plus control, it offers rapid traverse rates of 30 m/min in both X and Z axes. Consider the opportunity to buy this HWACHEON TTC-10 horizontal turning machine. Contact us for more information about this machine.
This 2-axis SPINNER TC 600-65MC horizontal turning machine was manufactured in 2017, featuring a Siemens 840D control system and a 16-position indexing turret. It includes a main spindle with a speed of up to 4,000 rpm and a power of 24 kW. The machine offers a swing diameter over bed of 425 mm and a maximum turning diameter of 310 mm. Consider the opportunity to buy this SPINNER TC 600-65MC horizontal turning machine. Contact us for more information about this machine.
This 5-axis Index G200 C turn-mill centre was manufactured in 2000. Consider the opportunity to buy this Index G200 C turn-mill centre. Contact us for more information.
A fully autonomous CNC dual-spindle turning machine Index is available. Turning diameter: 220mm, main spindle bar capacity: 65mm, main spindle power chuck diameter: 210mm, sub-spindle bar capacity: 60mm, sub-spindle power chuck diameter: 210mm, tool stations: 12, Y-axis travel: 120mm, gripper diameter range: 4mm-45mm/40mm-65mm, coolant pump pressure: 8bar, high-pressure pump capacity: 80bar, chip conveyor discharge height: 1250mm. Overall system dimensions X/Y/Z: approx. 9150mm/4350mm/2000mm, weight: approx. 10500kg, operating hours: approx. 92000h. Including bar loader FMB turbo 8-80 XT/3200A, automatic loading and unloading system alphaMAX 6-axis, chip conveyor, coolant system, high-pressure pump and spare parts. Operation with the loading and unloading system is designed for disc diameters from 80mm to 220mm. This is a fully automated system without operator. Documentation available. ...
Dados técnicos: Diâmetro circunferencial: 680 mm Largura central: 1000 mm Velocidade: 2800 1/min Chuck: ø300 mm Dimensões, aprox.: 5560 x 2400 x 2130 mm Peso, aprox.: 10.000 kg Equipamento: - Controlo: Heidenhain CNC Pilot 4290 - Revólver de 12 velocidades VDM 40 - Eixo C
Torno CNC Okuma LB 300- M Controlo: OSP-U100L Ano de Fabricação: 2000 Comprimento de viragem: 1.000 mm Diâmetro de giro: 430 mm Velocidade: 4.200 rpm Torre de ferramentas: 12 lugares (acionada) Gravação: VDI 40 Equipamento: IGF de um toque Transportador de cavacos Touchsetter Chuck de 3 mandíbulas Contramão Apanhador de peças Samsys 3000 Short Bar Loader (opcional)
A slant bed lathe Traub Sonim is available. Turning diameter over bed/cross slide: 350mm/160mm, turning length: 200mm, speed: 5000rpm. Machine dimensions X/Y/Z: approx. 3200mm/1500mm/1700mm, weight: approx. 3500kg. An on-site inspection is possible.
Torno CNC Vertical Fabricante: Okuma Tipo LVT300-M Ano de fabrico 2005 Controlo OSP-E100L Diâmetro de rotação sobre a cama: 320 mm Diâmetro máximo de rotação: 280 mm Comprimento máximo da peça: 200 mm Curso X: 210 mm Curso Y: 330 mm Dó (altura): 360 Velocidade do fuso: 40–4.000 rpm Diâmetro do eixo: 62 mm Número de posições de ferramentas na torre: 12 Comprimento da correia de alimentação: aprox. 3.500 mm Dimensões e Peso Dimensões (L x L x H): 5.000 x 1.500 x 2.400 Peso: 6.500 kg EQUIPAMENTO A torre pode acomodar ferramentas motorizadas Correia de alimentação 17 paletes Ainda existem vários suportes de aço e AGW para comprar, estes não estão incluídos no âmbito de entrega. Para mais informações, estou sempre disponível em 01778957069. A máquina está em muito bom estado de segunda mão, sem atraso na manutenção, geometricam ...
Key data: 260 mm, 500 mm
Centro de torneamento e fresagem Fabricante: Mori Seiki Tipo NL1500SY/500 Ano de construção 2007 Em funcionamento 03/2008 Controlo MSX-850-III Eixos Y e C Todas as 12 estações de torres são alimentadas Comprimento máximo de viragem: 500mm Diâmetro máximo de rotação 260mm Passagem do Fuso 50mm Velocidade das ferramentas acionadas 6.000 rpm Alimenta X Z B 30.000 Y 10.000 com carregador de vara LNS, comprimento 1000mm, mangas redutoras Max D 65mm. A máquina é vendida com todos os acessórios, suportes em aço, AGWs (todos ainda muito bons), pinças, mandrin, mandril para captação, documentação, sistema de extração. A máquina só funcionava em turno único.
Key data: 600 mm, 2000 mm
Torno CNC Fabricante: Gildemeister Tipo CTX 500 Ano de fabrico 1999 pouco utilizado Comprimento máximo de viragem 2000mm Ferramentas acionadas a cada segunda estação de torre Schunk de três mandíbulas de 315mm Bezel SMW A máquina está em condições ÓPTIMAS Geometricamente continua muito bom, desvio de 2000mm 0,02mm. A máquina está disponível a partir da semana 18. Para mais informações, estou disponível para si a qualquer momento através do 01778957069. Também temos o Whatsapp.
Two lead and feed screw lathes by Weiler are available. 1) Weiler Condor VS-2, distance between centers: 800mm, center height: 155mm, swing diameter over bed/cross slide: 330mm/160mm, speed: 2800rpm, machine dimensions X/Y/Z: approx. 1900mm/900mm/1500mm. 2) Weiler Praktikant M, distance between centers: 650mm, center height: 160mm, swing diameter over bed/cross slide: 320mm/175mm, machine dimensions X/Y/Z: approx. 1700mm/1000mm/1700mm, weight: approx. 700kg. Both machines show isolated individual functional limitations, but are operational. Documentation available. On-site inspection is possible.
A CNC lathe Gildemeister including a chip conveyor and a Forkat chuck is available. 1) Gildemeister NEF CT 60, year of manufacture: approx. 1982, distance between centers: 1000mm, turning length: 1000mm, max. turning diameter: 460mm, center height: 300mm, bed width: 450mm, spindle bore: 107mm, speed: 3015rpm, tool stations: 12, quill diameter: 100mm, quill stroke: 180mm, machine dimensions X/Y/Z: approx. 5400mm/2100mm/2000mm, weight: approx. 7000kg. 2) Chip conveyor Allweiler GB 30L 38L. Without Filter. Documentation available. An on-site inspection is possible.
