Fabricante:
(Categoria: 102)
CONTROLS Point-to-point control (NC) HEIDENHAIN BASIC FUNCTIONS number of spindles: 1 WORKING RANGE TURNING swing diameter (max): 320 mm turning diameter (max): 150 mm worpiece length max.: 750 mmMAIN SPINDLE spindle revolutions (max): 4000 /min drive power: 16 kWTAILSTOCK sleeve diameter: 60 mm taper: MK 4 ELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequency: 50 HzDIMENSIONS / WEIGHTS total weight approx.: 2500 kgATTACHMENTS (TURNING) European CE standards: yes 6000 Hours
This 8-axis DOOSAN PUMA TT 1800 SY was manufactured in 2012. It features a maximum turning diameter of 230 mm and a maximum workpiece length of 700 mm. The machine is equipped with two spindles and two turrets, providing enhanced machining capabilities. If you are looking to get high-quality turning and milling capabilities, consider the DOOSAN PUMA TT 1800 SY turn-mill centre we have for sale. Contact us for further details.
CONTROLS CNC controls SIEMENS BASIC FUNCTIONS number of spindles: 4 number of turrets: 2 live positions: yes number of c-axes: 4 WORKING RANGE TURNING turning diameter (max): 100 mm bar diameter (max): 20 mmMAIN SPINDLE spindle revolutions (max): 5000 /minCOUNTER SPINDLE spindle revolutions (max): 5000 /minTOOL MAGAZINE number of positions: 48 ELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequency: 50 HzDIMENSIONS / WEIGHTS space requirements -left/right-: 9600 mm space requirements -front/back-: 1500 mm total height: 2200 mm total weight approx.: 2600 kgATTACHMENTS (TURNING) bar magazine: optional - bar length (max): 3000 mm chip conveyor: yes coolant unit: yes hydraulic system: yes Features:- various tool holders- various collets in every millimeter increment- bar feeder (dual channel)
CONTROLS CNC controls MITSUBISHI M720BM BASIC FUNCTIONS number of spindles: 2 number of turrets: 1 live positions: yes number of c-axes: 2 WORKING RANGE TURNING swing diameter (max): 700 mm turning diameter (max): 350 mmMAIN SPINDLE spindle revolutions (max): 4000 /min spindle bore diameter: 90 mm c-axis: yes X/Z SLIDE - rotation speeds (max): 6000 /minTOOL MAGAZINE number of positions: 24 ELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequency: 50 HzDIMENSIONS / WEIGHTS total weight approx.: 7500 kgATTACHMENTS (TURNING) chip conveyor: yes coolant unit: yes hydraulic system: yes European CE standards: yes Machine in a good conditionThe spindle guides need to be replaced.Machine equipment (1500.- CHF (below)):- 1x double face and longitudinal turning tool holder- 3x face and longitudinal turning tool holders- 1x boring ...
DOOSAN MX2100ST turning center, year 2022, equipped with FANUC 31i-B5 control. This multi-tasking lathe offers X1/Z1 travels of 565/1,050 mm, Y-axis ±85 mm, and B-axis indexing. Main and counter spindle each deliver 22/18.5 kW at 5,000 rpm with A2-6 nose and 8 chuck; 76 mm spindle bore accommodates bar stock up to ø65 mm. BMT55P turret with 12 driven tool positions (5,000 rpm) plus 80-station Capto C6 ATC with 12,000 rpm milling spindle (18.5/15/11 kW) and 2.0 s tool change. Single Swiss owner; delivered complete with LNS Sprint 565 S2 bar feeder (3.2 m, ø3â€34 mm), 55-bar high-pressure coolant to milling spindle, electric tool-measuring arm, parts catcher, oil-mist extraction and HAINBUCH TOPlus/Mando workholding.
CONTROLS CNC controls SIEMENS BASIC FUNCTIONS number of spindles: 2 number of turrets: 1 number of c-axes: 2 WORKING RANGE TURNING turning diameter (max): 100 mm worpiece length max.: 150 mmMAIN SPINDLE spindle revolutions (max): 6000 /minTOOL MAGAZINE number of positions: 12 ELECTRICAL SPECIFICATIONS total power consumption: 36 kW mains voltage: 400 V mains frequency: 50 HzDIMENSIONS / WEIGHTS total weight approx.: 7000 kgATTACHMENTS (TURNING) hydraulic system: yes European CE standards: yes Machines in good condition:- Integrated pick-up automation- Two EMAG machines configured in a line are for sale.- A robot destacking unit with 100% parts inspection can also be purchased.
Torno Schaublin 110-CNC de alta qualidade e preciso. A máquina está em muito bom estado no geral e tem sido usada com cuidado. Nota: O amplificador do fuso está atualmente defeituoso e teria de ser reparado ou substituído. De resto, o torno é completo e bem mantido.
CONTROLS CNC controls FANUC 31I MODEL A BASIC FUNCTIONS number of spindles: 2 number of turrets: 2 live positions: yes number of c-axes: 2 number of y-axes: 1 WORKING RANGE TURNING turning diameter (max): 230 mm bar diameter (max): 65 mm worpiece length max.: 700 mmMAIN SPINDLE spindle revolutions (min): 50 /min spindle revolutions (max): 5000 /min spindle bore diameter: 65 mm c-axis: yes COUNTER SPINDLE spindle revolutions (min): 50 /min spindle revolutions (max): 6000 /min c-axis: yes X/Z SLIDE tool fixture: Turret ELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequency: 50 HzDIMENSIONS / WEIGHTS space requirements -left/right-: 2800 mm space requirements -front/back-: 1630 mm total height: 2200 mm total weight approx.: 9000 kgATTACHMENTS (TURNING) chip conveyor: yes coolant unit: yes band filtra ...
This 5-axis Hanwha XD20 COMBINED was manufactured in 2013. It features a maximum rotation speed of 10,000 rpm and a maximum working diameter of Ø20 mm. The machine operates at a rated voltage of 220–240 / 380–415 VAC and has a weight of 2,500 kg. If you are looking to get high-quality turning capabilities, consider the Hanwha XD20 COMBINED swiss type turning machine we have for sale. Contact us for further details.
This 5-axis Hanwha XD20V COMBINED was manufactured in 2014. It features a maximum rotation speed of 10,000 rpm and a maximum working diameter of Ø20 mm. With a robust design and a weight of 2500 kg, this machine is ideal for precision turning applications. If you are looking to get high-quality Swiss type turning capabilities, consider the Hanwha XD20V COMBINED machine we have for sale. Contact us for further details.
This 9-axis Nakamura NTJ100 turn-mill centre was manufactured in 2017, featuring a bar capacity up to 65 mm and dual spindles with maximum speeds of 4500 and 5000 rpm respectively. It includes a Samsys bar loader, Absolent extraction system, and a variety of automated features such as coolant supply through the spindle, parts catcher, and automatic tool setting devices. Consider the opportunity to buy this Nakamura NTJ100 turn-mill centre. Contact us for more information about this machine.
control: SIEMENS 840D SL ShopTurn turning diameter: 700 mmswing over bed: 900 mmturning length: 3065 mmc-axis: indexing: 0.001 °turning speeds: -2500 U/mintool taper: VDI 50 Top turret tool hodler:: 12 tailstock quill taper MT: 5 y-travel: 160 mmrapid traverse X-axis: 40 m/minrapid traverse Z-axis: 30 m/minOverall size: 4450x2100x2350 mmrapid traverse Z-axis: m/minweight of the machine ca.: 7200 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
CONTROLS CNC Teach In Controls SIEMENS BASIC FUNCTIONS design principle: flatbed number of spindles: 1 WORKING RANGE TURNING swing diameter (max): 720 mm turning diameter (max): 380 mm bar diameter (max): 108 mm worpiece length max.: 1500 mmMAIN SPINDLE spindle revolutions (min): 0 /min spindle revolutions (max): 1200 /min number of gears: 3 spindle bore diameter: 108 mmX/Z SLIDE traverse velocity Z (max): 5000 mm/min traverse velocity X (max): 5000 mm/min rapid traverse Z: 5000 mm/min rapid traverse X: 5000 mm/min tool fixture: Steel Holder TAILSTOCK distance betw. centers (max): 1500 mm sleeve stroke: 200 mm sleeve diameter: 120 mm taper: MK 6 ELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequency: 50 HzDIMENSIONS / WEIGHTS space requirements -left/right-: 4050 mm space requirements -front/back-: 1730 mm ...
control: SIEMENS 810D turning diameter over bed: 1000 mmcentre height: 500 mmcentre distance: 2000 mmturning dia. over face-slide: 700 mmspindle bore: 128 mmspindle taper ISO: DIN55027/11 spindle turning speed - stepless: 6.4-1600 U/mintailstock quill taper MT: 6 diameter of quill: 125 mmquill stroke: 280 mmfeed - longitudinal/cross: 5000/4000 mm/minrapid traverse longitudinal and cross: 10/5 m/mindimensions of machine: 5600 x 2600 x 2800 mmweight: 9.1 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
control: MAZAK Mazatrol 640T Nexus swing over bed: 610 mmswing diameter over bed slide: 350 mmturning length: 982 mmc-axis: indexing: 0.001 °turning speeds: 4000 U/mintool taper: ASA A2-8 tailstock quill taper MT: 5 rapid traverse X-axis: 30 m/minrapid traverse Z-axis: 33 m/minOverall size: 4500 x 2000 x 1600 mmweight of the machine ca.: 6.5 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
diâmetro de giro sobre a cama: 400 mmaltura central: 195 mmdiâmetro de giro sobre o descanso deslizante: 246 mmcomprimento de giro: 650 mmvelocidade de giro do eixo - stepless: 0-2500 U/minnecessidade de potência total: 7,5 kWpeso da máquina ca.: 1,8 tdimensões da máquina ca.: 2x1.3x1.6 m
controle: HEIDENHAIN MANUAL PLUS M diâmetro de giro sobre a cama: 320 mmaltura central: 160 mmdistância central: 800 mmdiâmetro de giro sobre a face deslizante: 150 mmfuro do fuso: 50 mmcone do fuso: DIN 55027/B6 velocidade de viragem do eixo - stepless: 0-4000 U/minpotência total necessária: 7 kWdimensões da máquina ca.: 400x160x190 cmpeso da máquina ca.: 2,2 t
diâmetro de giro: 270 mmcomprimento de giro: 400 mmcontrolo: FANUC 18i Manual Guide
diâmetro de giro: 225 mmcomprimento de giro: 656 mmcontrolo: FANUC 31i B-NT-SmartX faixa de velocidade de giro do eixo: 4500 + 6000 U/mincabeça da torre: 2x 24 12 angetriebenDimensões (L/W/H): 3500 x 3500 x 2800 mmpeso da máquina ca.: 10 tEixos Y- & B- eixosAcessóriosdiversos Mais detalhes sobre
control: WEILER turning diameter over bed: 410 mmcentre height: 200 mmcentre distance: 1000 mmturning dia. over face-slide: 200 mmspindle bore: 54 mmspindle taper ISO: 55027/6 spindle turning speed - stepless: 4-3000 U/mintailstock quill taper MT: 4 diameter of quill: 65 mmquill stroke: 120 mmfeed - longitudinal/cross: 0-20 mm/minrapid traverse longitudinal and cross: 10/5 m/minspindle drive: 9/13 kWdimensions of machine: 2300x1200x1800 mmweight: 2.0 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
diâmetro de giro sobre a cama: 20 mmpassagem do eixo: 24 mmcomprimento de giro: 320 mmControle: CINCOM velocidade de giro do eixo - stepless: 200-10000 U/mincabeça da torre: peso da máquina ca.: 3.35 tdimensões da máquina ca.: 3.0x1.3x2.3 m
control: FANUC TXP-200 FA turning diameter: 360 mmswing over bed: 600 mmswing diameter over bed slide: 450 mmturning length: 683 mmc-axis: indexing: 0.001 °turning speeds: -3000 U/mintool taper: VDI 40 Top turret tool hodler:: 12 tailstock quill taper MT: 5 quill travel: 100 mmfeed: 1-10 m/minrapid traverse X-axis: 20 m/minrapid traverse Z-axis: 24 m/minOverall size: 4450x2100x2350 mmweight of the machine ca.: 7200 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
diâmetro de giro: 212 mmcomprimento de giro: 750 mmcontrole: HEIDENHAIN Manual Plus velocidade de giro do eixo - stepless: 10-4000 U/mincabeça da torre: 8 Peso estacionário da máquina ca.: 2 tdimensões da máquina ca.: 2,85 x 1,65 x 1,80 m
diâmetro de giro sobre a cama: 270 mmdiâmetro de giro sobre o descanso deslizante: 130 mmcomprimento de giro: 500 mmvelocidade de giro do eixo - stepless: 40-3000 U/minpeso da máquina ca.: 1 tdimensões da máquina ca.: 1.5x0.8x1.7 mLeitura digital HEIDENHAINMisc.accessories
diâmetro de giro sobre a cama: 360 mmaltura central: 170 mmdistância central: 650 mmdiâmetro de viragem sobre a corrediça facial: 196 mmfuro do fuso: 42 mmcone interior MT: 5 eixo velocidade de giro - stepless: 20-3250 U/minpeso da máquina ca.: 1,6 tdimensões da máquina ca.: 200 x 125 x 165 cm
diâmetro de giro: 16 mmcomprimento da peça - máx.: 145 mmvelocidades do eixo principal:: 15000 rpm controlo: SIEMENS 840 DSL peso da máquina ca.: 2.6 tdimensões da máquina ca.: 2.2 x 1.5 x2.0 m
Controlo SIEMENS 805 DADOS TÉCNICOS: ÁREA DE TRABALHO / DIMENSÕES Diâmetro de circulação sobre a cama [mm] 820 Diâmetro de circulação através de slider plano [mm] 515 Deslocação da distância do planador [mm] 520 Deslocação da distância do suporte superior [mm] 250 Comprimento de viragem [mm] 2000 Altura máxima sobre a teia plana [mm] 400 Largura da cama [mm] 560 Comprimento do guia de diapositivos da cama [mm] 800 Largura plana do slider [mm] 320 Comprimento plano do slider [mm] 1005 Largura de suporte superior [mm] 200 Secção transversal do cinzel rotativo de acordo com DIN 770 hxb [mm] 40x25 Spindle principal Cabeça de fuso de acordo com DIN 55 027 [gr.] 11 Diâmetro do fuso no rolamento dianteiro [mm] 170 Furo de fuso [mm] 128 Cone interno do eixo principal [metr.] 136 UNIDADE PRINCIPAL Motor trifásico continuamente ajustável (motor ...
