serras usadas para venda (1,297)

roll diameter:420 mmthroat:400 mmworkpiece height:325 mmtable surface area:615 x 615 mmtable swivelabel +/-:10/45 °table - inclinable:+/- 20 °cutting speed:20 - 2500 m/mintotal power requirement:2 kWweight of the machine ca.:0,5 tdimensions of the machine ca.:0,95 x 0,65 x 1,83 m

cutting diameter: 450 mmsaw band length: 6600 x 41 x 1,3 mmtable height: 800 mm: 450 mm: 450 mm: 450 x 270 mmworkpiece weight: 15 - 95 m/min: 7,5 kWwork height max.: 3000 kgconnected load: 3750 x 1400 x 2100 mmControl: NEW PRICE ~ 40.700 EUROvery good conditionSemi-automatic bandsaw, two-column guidedEquipment:- hydraulic vice- infinitely variable cutting speed- chip conveyor- line laser- driven chip brush- coolant device- operating instructionsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight of the machine ca.:1750 kgsawing motor:2,2 kWtotal power requirement:5 kWcutting speed:17 - 90 m/mincutting diameter:320 mmcutting range max.:320 x 320 mmsaw band length:4.930 x 34 x 1,1 mmfeed length:max 9x 600 mmdimensions of the machine ca.:2,6 x 2,4 x 1,40 mBandsaw automatic, straight cut,min. cutting diameter 10mm,min. cutting length 6mm,min. offcut 15mm (automatic 80mm),max. weight of material 400kg/m,coolant box 60l, pump 16l/min,clamping pressure 20-60bar,dimensions:chipconveyor 2.400x 950mmroller track 2.200 x 950mm,5pcs. saws (new) 4.930 x 34 x 1,1mm operating manual,

cutting diameter:320 mmsaw band length:3280 mmcutting width:320 320 mmtotal power requirement:3,8 kWweight of the machine ca.:1150 t- columm guidance- roll-conveyer 4000mm / 1000 mm lenght- cutting speed 15 - 105 m / min- mitre cutting up to 60°

Operation not tested! Auction-ID: A1-41987-77

Equipped with: DoALL 2013-V vertical band saw – Industrial Version (1996), machine is equipped with integrated welding and grinding device for welding and finishing saw bands, allowing for its own saw band production and repair, connection: 400V – 3~ – 50 Hz, saw band length: 3912 mm, welding machine integrated, grinding device integrated, adjustable belt speed, solid cast iron table, infinitely adjustable power supply, belt width capacity 3.2 – 25.4 mm, motor power: 2 HP, belt speed low position: 9.1 – 97.5 m/min, belt speed high position: 167.6 – 1676.4 m/min, belt tension manual, machine dimensions (W × L × H): 1422 × 1118 × 2032 mm, material feed height: 991 mm, machine weight 567 kg Auction-ID: A1-41987-11

Hydr. hacksaw machine - Coolant device - 2 speeds Cutting diameter 260 mm Saw blade length 450 x 40 x 2 mm Cutting range at 60 degrees: square 240 mm Cutting area at 90 degrees: rectangle 260 x 180 Total power requirement 2.0/2.6 kW Machine weight approx. 1.4 t Dimensions L x W x H 2.1 x 1.7 x 1.0 m Auction-ID: A7-44032-609

Important information on the auction and processing: Pick-up is only possible after prior written appointment. Only the item designated in the heading (only the machine) is for sale. Objects, attachments, tools, pallets, shelves or other materials visible in the photos are not part of the auction unless they are expressly mentioned in writing in the item description. All dimensions, weights, technical data and operating hours are approximate indications. No guarantee is given for correctness and completeness. Deviations are reserved. A forklift (1.6 t) is available by arrangement. There is no entitlement to free loading assistance, unless it is not time-consuming. In the event of extraordinary or disproportionate effort, we reserve the right to charge separately for any additional expenses incurred. The buyer is solely responsible for dismantling, loading and transporting. Mining is ...

cutting diameter: 220 mmcapacity 90 degrees: square: 220 x 220 mmturning speed range:: 20 - 140 m/minsaw band length: 3720 x 34 x 1.1 mmheight of material-table: 825 mmcoolant capacity: 80.0 ltotal power requirement: 2.5 / 3.5 kWweight of the machine ca.: 1500 kgrange L-W-H: 2350 x 2050 x 1500 mm- in checked conditions - machinevideo - https://www.youtube.com/watch?v=joc0EbemYC8Equipment:- electro-hydraulic band saw - FULLY AUTOMATIC- for sawing hollow profiles and solid materials made of steel, stainless steel,. tool steel, non-ferrous metals and plastic- control panel on the front right including button for manual operation (setup/individual cut)- electro-hydraulic material clamping- stepless cutting speed .. 20-140 m/min.- electro-motor chip conveyor- manual adjustment of the material feed range via handwheel including analogue value display- automatic height adjustment of the saw fra ...

: neu : ca. 10 Wochen ab Auftrags : Italien : 11640 €: 223.49 €: Schwenkrahmen : 3270x27x0,9 mm: 35/70 m/min: 300 mm: 240 mm: 420x200 mm: rund 240 mm, quadrat 230 : rund 170 mm, quadrat 170 : 830 mm: 1650 mm: 1200 mm: 1900 mm: 400 kghydraulicvicesaw beam moves up and down by hydraulic cylinderfast descentautomatic fast up/down conrolled by feeler pinadjustable pressure according to section and type of materialdouble safety buton for cycle start2 speedscoolant equipment_CUTTING CYCLE_Vice locking, Quick bow pull-down hydraulically operated, Blade rotation and cooling liquid start-up,Working pull-down, end of the cutting cycle, Stop of blade rotation and supply of cooling liquid,Quick bow lift-up, Stop of bow upwards movement, vice unlocking if selected.Optional equipmente: adjustable vice pressure EUR 330,--The data for this ad was created with ModulMWS - the software solution of Lo ...

cutting diameter: 300 mmsaw band length: 3900 mmtotal power requirement: 3 kWweight of the machine ca.: 0,3 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Function:Semi-automatic metal band saw with mitre adjustmentCutting diameter (round): approx. 250 mm at 90°Cutting range (flat): approx. 280 x 200 mm at 90°Cutting range (square): approx. 230 mm at 90°Including: 2 x conveyor belts, dimensions: 232 x 38 , 118 cm, 500 cm x 52 x 112 (L/W/H) Auction-ID: A1-43917-14

Auction-ID: A1-43301-113

Auction-ID: A1-43301-185

Automatic Wave SawSaw Blade 315mmMax. Shaft Diameter 90mmSpeeds 9 - 45 rpmMotor 3,0KWSee pictures Condition: untested (6) Auction-ID: A7-44325-567

Machine number: 70489, power requirement min: 4.8 kw, drive saw blade: 3.0 kw, saw blade dimension: 4400x34x1.1mm, saw blade tension: torque wrench, max material support weight: 250kg/m, cutting speed: 10-150m/min, lowering speed: 0-600mm/min stepless, material insertion single: 0-600mm, material insertion multiple: 0-6000mm, more details on cutting capacity of flat material and round material see photos from the manual incl. roller spacing: approx. 2 m long Auction-ID: A7-44480-20

Auction-ID: A1-43301-186

A total of 3 units, 2x2 pieces with the dimensions: 2500x550x750 and 1x 3000x550x750 Auction-ID: A7-44480-22

saw blade diameter: 350 mmcutting diameter: Rund 115 mmspeeds: 30/60 U/mintotal power requirement: 2,6 kWweight of the machine ca.: 0,4 tdimensions of the machine ca.: 1,0 x 1,0 x 1,8 mIncludes miter adjustment 60° left / 45° rightIncludes 2 x roller conveyors, total 3.0 m (1.5 m each)Includes 6 saw bladesIncludes coolant pumpIncludes base frameIncludes quick-release viseThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

2 conveyor belts with dimensions 2000x550x750, completely without content Auction-ID: A7-44480-23

Technical data: Cutting diameter (Ø): 335 mm Saw blade dimensions: 4400 x 34 x 1.1 mm Table height: 750 mm Smallest diameter: 5 mm Cutting range at 90° (round): 335 mm Cutting area at 90° (flat): 500 x 335 mm Cutting speed: 15 – 150 m/min Clamping range (width / height): 0 – 500 / 15 – 335 mm Material insertion (single / multiple) : 0 – 600 / 0 – 6000 mmIncluding: roller conveyor. 4000 x 640 mm (L/W) Auction-ID: A1-43917-9

Mounting band saw:Cutting range at 90 degrees: around 125 mmCutting range at 90 degrees: square 125 mmCutting range at 90 degrees: rectangular 127 x 125 mmSaw blade dimensions 1435 x 12.7 x 0.6 mmBelt speed 38 - 80 m/minTotal power requirement 0.95 kWMachine weight approx. 18 kgDimensions L x W x H 720 x 380 x 450 m Condition: never used / new (5) Auction-ID: A7-44325-617

Auction-ID: A1-44014-108

Description:-Mitre cuts up to 60° left-Cutting speed 35 / 70 m/min.-Clamping vice with quick-release device-Saw blade guide made of carbide-Belt tension control-Electr. Automatic coolingAuto-Cut system = 3 steps System-Automatic saw frame lowering via the hydraulic cylinder-Infinitely adjustable feed-With limit switch-High speed lowering of the saw frame from the rest position to the workpiece, then switch to normal saw feed-Manual operationCutting diameter 220 mmSaw blade length 2455 mmTable height 850 mmCutting width 230 mmCutting speed 35 + 70 m/minSaw blade dimensions 2455 x 27 x 0.9 mmCutting capacity at 60° round 90 mmCutting capacity at 60° Square 90 mmCutting capacity at 60° Flat 90 x 100 mmCutting capacity at 45° Around 150 Cutting capacity at 45° Square 150 Cutting capacity at 45° Rectangle 150 x 210 Cutting capacity at 90° Around 220 mmCutting capacity at 90° Square 2 ...

Equipped with: Paoloni P30 sliding table saw (year of construction approx. 1991), 400V 3-phase connection, motor power approx. 4–5.5 kW, suitable for saw blade Ø 300 mm, maximum cutting height approx. 90–100 mm, tilting saw blade 0–45°, roller/sliding table length approx. 2,600–3,200 mm, total weight approx. 700–1,000 kg. incl pre-cutter. Auction-ID: A1-41986-26

BEHRINGER HBP1500T – New machines that have never been used Serial Number: 10018158 Type: HBP1500T sp Year of construction: 2024 General Description: BEHRINGER band saw HBP1500T equipped with special programming with semi-automatic cutting positioning. Equipment and features: Special programming / Semi-automatic positioning of the cut High-capacity and dynamic sawing in the cut Dynamic attack and end of cut Carterized machine Separate hydraulic power unit suitable for 30 m Hydraulic hoses (30 m) Electrical cables (30 m) – control cabinet Centralized lubrication Tape size: 54 x 1.6 mm Micro-spraying Material feeding by trolley Swivel control panel Linear Laser Remote maintenance via VPN Control camera with screen Machine installation photos at the factory reception. Currently, the machine is stored in France. Auction-ID: A1-44030-1

Tested for proper operation Neat machine, backlash-free semi-automatic, hydraulic clamping and lowering, 2-sided mitre equipped with cooling pump 4 spare saws are included Auction-ID: A1-42356-30

Mitre band sawCutting diameter 170 mmSaw band dimensions 2080 x 20 x 0.9 mmTable height 880 mmCutting speed 40 + 80 m/minCutting capacity at 90° Around 170 mmCutting capacity at 45° Around 125 mmCutting area at 90 degrees: rectangle 150 x 190 mmCutting area at 45 degrees: rectangle 95 x 120 mmTotal power requirement 1.1 kWMachine weight approx. 0.24 tDimensions LxWxH 870 x 1,550 x 1700 mm Condition: never used / new (5) Auction-ID: A7-44032-447

Hydraulic clamping device, Minipos 807 control, hydraulic length measuring system Auction-ID: A1-44014-7

New machine SPECIAL PRICE incl.:- Starter Kit 2- Micro spraying deviceReady for demonstration in our exhibition Roller conveyors shown optional Fully automatic hydropneumatics· Mitre left/right· Head oblique cuts up to 45° (Schifter) a. b.· Pneumatic Vertical Clamping Device· Clamping vice before and after the saw blade Saw blade diameter 350 mmCutting range at 90 degrees: around 120 mmCutting range at 90 degrees: square 110 mmCutting range at 90 degrees: flat 200x88 mmCutting area at 45 degrees: around 115 mmCutting area at 45 degrees: square 110 mmCutting range at 45 degrees: square 150x80 mmTotal power requirement 1.5/1.8 kWMachine weight approx. 0.59 tDimensions L x W x H 1.1 x 0.95 x 1.7 m Auction-ID: A7-44032-416