Fabricante:
(Categoria: 105)
cutting diameter: 230 mmcutting speed: 35 - 70 m/mincutting width: 260 x 200 mm: mmsaw band length: 2720 x 27 x 0,9 mmtotal power requirement: 1,1 kWweight of the machine ca.: 0,68 tdimensions of the machine ca.: 1,8 x 1,8 x 1,6 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: 280 mmcapacity 90 degrees: flat: 280 x 160 mmcapacity 90 degrees: square: 240 x 240 mmband length: 425 x 40 mmcapacity 45 degrees: round: 180 mmcapacity 45 degrees: flat: 150 x 250 mmcapacity 45 degrees: square: 170 x 170 mmtotal power requirement: 1,8 kWweight of the machine ca.: 450 kgdimensions of the machine ca.: 1,4 x 0,8 x 1,0 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
saw band length: 4400 x 34 x 1,1 mmband speed: 15 - 150 m/mincapacity 90 degrees: square: 500 x 335 mmcapacity 90 degrees: round: 335 mmwork height max.: 750 mmMotor Capacity: 3 kWmachine weight ab.: 1020 kgdimensions: 2150x1200x1900 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 10 Wochen ab Auftrags : Italien : 10860 €: 208.51 €: Schwenkrahmen : 3120x27x0,9 mm: 35/70 m/min: 280 mm: 240 mm: 370x140 mm: rund 225 mm, quadrat 215 : rund 140 mm, quadrat 140 : 830 mm: 1650 mm: 1200 mm: 1850 mm: 390 kghydraulicvicesaw beam moves up and down by hydraulic cylinderfast descentautomatic fast up/down conrolled by feeler pinadjustable pressure according to section and type of materialdouble safety buton for cycle start2 speedscoolant equipment_CUTTING CYCLE_Vice locking, Quick bow pull-down hydraulically operated, Blade rotation and cooling liquid start-up,Working pull-down, end of the cutting cycle, Stop of blade rotation and supply of cooling liquid,Quick bow lift-up, Stop of bow upwards movement, vice unlocking if selected.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: 250 mmdimensions of saw-blade: 450 x 45 x 2,0 mmcutting width: 280 x 200 mmcapacity 45 degrees: round: 180 mmcapacity 45 degrees: square: 170 x 200 mmcutting speed: 16- 32 m/minpower requirement: 1,3 kWdimensions: 1,3 x 0,55 x 1,0 mweight: 180 kgUsed hook saw in good condition- less used, only for our own light use.- 1x extra saw blade- manual lenght stopper- angel cut- coolant system- automatic stop- hyd. movement of saw bladeThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
dimensions of saw-band: 3150 x 25,4 x 0,9 mm: 20/40 m/mincapacity 90 degrees: round: 260 mmcapacity 90 degrees: square: 250 mmcapacity 90 degrees: flat: 320 x 200 mmcapacity 45 degrees: round: 230 mmcapacity 45 degrees: square: 210 mmcapacity 45 degrees: flat: 240 x 200 mmControl: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting range: 300 mmcapacity 90 degrees: flat: 330 x 260 mmcapacity 90 degrees: square: 260 x 260 mmcapacity 45 degrees: round: 260 mmcapacity 45 degrees: flat: 270 x 200 mmcapacity 45 degrees: square: 250 mmcapacity 60 degrees: round: 180 mmcapacity 60 degrees: flat: 170 x 170 mmcapacity 60 degrees: square: 180 mmautomatic feeds: 9999,9 mmfeed: minimum 2.0 mmcutting diameter: minimum 5.0 mmband speed: 15 - 100 m/minvice: 340 mm Öffnungdimensions of saw-band: 3650 x 27 x 0,9 mmControl: MEP CNC total power requirement: 2.2 kWweight: 1240 kgrange L-W-H: 1800 x 1900 x 1750 mm actual NEW price about 23.000 Euro special price on requestEquipment:- robust electro-hydraulic fully automatic band saw (INDUSTRY)- with additional semi-automatic function, for cuts from 0° to 60° left- WINDOWS CE” based MEP 50 – control and 7” touch screen display simple and quick setting of all machine pa ...
cutting diameter: 250 mmsaw band length: 3660x25x0,9 mmcutting width: - mmtotal power requirement: 1 kWweight of the machine ca.: 0,9 tdimensions of the machine ca.: 2x10,5x1,3 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
saw blade diameter: 450 mmcutting diameter: 150 mmcutting lenght max.: 1000 mmweight of the machine ca.: 1.35 tdimensions of the machine ca.: 2.7 x 1.5 x 1.65 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
saw blade diameter: 300 mmcutting diameter: 90 mmstroke: mmturning speeds: 40/80 U/mintotal power requirement: 1,5 kWweight of the machine ca.: 350 Kgdimensions of the machine ca.: 0,9 x 0,8 x 1,5 mCold circular saw- Machine light- Coolant systemThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Width of the band swa blades: 50-200 mmSharpening pitch: 60 mmWeight: 750 kgWINTER CNC BAND SAW GRINDER BANDSAWMAX PNK-CNCPNK-CNC is designed to grind all types of band saw blades used in metal cutting.PNK-CNC guarantees a flawless, fast and precise grinding of NU, NV, PV, PU, KV, SB tooth forms with its state-of-the-art grinding technologyTechnical specifications:- Band saw width 50-200mm- Band saw length Max. 12m- Blade thickness Min 0.4mm- Tooth pitch Max. 60mm- Tooth depth Max. 30mm- Tooth forms NU, NV, PV, PU, KV, SB Hook angle (0°) (+40°)- Feed rate (speed controlled) Max. 90 teeth/min.- Grinding wheel dimensions D: Ø250mm d:Ø20mm- Grinding wheel thickness 5-13mm (depending on tooth pitch)- CBN Grinding wheel dimensions D: Ø250mm d:Ø20mm- CBN Grinding wheel thickness 2-3mm (depending on tooth pitch)- Grinding wheel rotation (speed controlled) 1400-5500 r.p.m.- Grinding wheel ...
saw blade diameter: 400 mmcapacity 90 degrees: round: 120 mmcapacity 90 degrees: flat: mmturning speeds: 1400 / 2800 U/minengine output: 4,0 kWweight of the machine ca.: 180 Kgdimensions: 1,0 x 0,9 x 1,2 mManuell underfloor aluminum circular sawThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: 260 mmsaw band length: 3800 x 27 x 0,9 mmcutting width: 400 x 260 mmcutting speed: 20 - 90 m/mintotal power requirement: 1,85 kWweight of the machine ca.: 0,62 tdimensions of the machine ca.: 1,8 x 1,6 x 1,5 mSemi-automatic miter band saw- Miter cutting +/- 60 degrees- Coolant system- Emergency stopThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
saw blade diameter: 400 mmcutting diameter: 130 mmstroke: 150 mmmitter cutting - all-position: +90°/-90° °cutting speed: 10/20 m/minvoltage: 400 Vfeed speeds infinitely variable: 0 - 1000 mm/mintotal power requirement: 3,4 kWweight of the machine ca.: 840 kgdimensions of the machine ca.: 1,10 x 0,9 x 1,50 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: 800 mmsaw band length: 9195 mmcutting width: 1,6 mmtotal power requirement: 23 kWweight of the machine ca.: tdimensions of the machine ca.: mcutting range enlargement up to 800 round steelroll conveyorcoolant devicechip conveyorTechnische Daten:Schnittbereich rund / cutting range round 800 mmSchnittbereich vierkant /cutting range square 830x730 mmSchnittgeschwindigkeit stufenlos / cutting speed stepless 12-120 m/min.Sägebandlänge / dimensions of the saw band 9195x67x1,6 mmGesamtantriebsleistung / drive capacity 23 kWGewicht der Maschine ca. / weight 11600 kgTechnische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich -Technical data, accessories and description of the machine are not binding.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: 440 mmsaw band length: 5200 x 1,1 x 34 mmcutting width: 610 x 440 mmcutting speed: m/mintotal power requirement: 3,7 kWweight of the machine ca.: 0,8 tdimensions of the machine ca.: 2,7 x 1,55 x 1,5 mBand saw horizontal- Coolant system- Emergency stop switchThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
capacity 90 degrees: round: 115 mmcapacity 90 degrees: flat: 100 x 150 mmband saw dimensions: 1638 x 13 x 0,65 mm: 20/29/50 m/minThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: 305 mmcapacity 90 degrees: flat: 350 x 200 mmcapacity 45 degrees: round: 250 mmcapacity 45 degrees: flat: 230 x 200 mmcapacity 60 degrees: round: 175 mmcapacity 60 degrees: flat: 170 x 100 mmcutting speed: 18 - 110 m/minvice: max. 350 mmdimensions of saw-band: 3370 x 27 x 0.9 mmengine output: 1.5 / 1.8 kWweight of the machine ca.: 880 kgrange L-W-H: 1700 x 2200 x 2000 mmEquipment:- robust, electro-hydraulic fully automatic band saw- user-friendly controls- Mitre cuts left to 45. possible in automatic mode- Mitre cuts up to 60°. only possible in semi-automatic mode- Hydraulic power unit with automatic. pressure cut-off when idling- Stationary base frame with large chip drawer and automatic cooling system- infinitely variable saw blade speed adjustment (ESC)- rotating chip brush- remnant min. 80 mm- operating instructions (PDF)The data for this ad was created with Modu ...
cutting diameter: 225 mmsaw band length: 2480 mmcutting width: 250 mmcutting speed: 45 / 90 m/mindimensions of saw-band: 2480 x 27 x 0,9 mmcapacity 45 degrees: flat: 135 x 185 - 145 x 150 mmcapacity 45 degrees: round: 150 mmcapacity 45 degrees: square: 145 mmcapacity 60 degrees: flat: 63 x 107 - 69 x 90 mmcapacity 60 degrees: round: 70 mmcapacity 60 degrees: square: 70 mmcapacity 90 degrees: flat: 240 x 160 - 250 x 110 mmcapacity 90 degrees: round: 225 mmcapacity 90 degrees: square: 185 mmtotal power requirement: 0,75 / 1,1 kWweight of the machine ca.: 200 kgdimensions of the machine ca.: 1385 x 580 x 890 mmTechnical features:- Hydraulic head descent control system- End stop at the end of the cut- Powerful three-phase induction motor with 2 speeds andTransmission with oil bath- Saw frame, vice and swivel group made of cast steel- Steel blade guide with ball bearings- Vice with quick clam ...
usava
cutting diameter: 450 mmband length: 740 mmstroke: . mmtotal power requirement: . kWweight of the machine ca.: . tdimensions of the machine ca.: . mwith contents see photosThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us Morethan 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
length: ~ 700 mmwidth: ~ 600 mmheight: ~ 2.000 mmVollmer Junior B automatic bandsaw sharpener for sharpening bandsaw blades.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: 260 mmband length: 480 mmstroke: . mmtotal power requirement: . kWweight of the machine ca.: . tdimensions of the machine ca.: . mwith contents see photosThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us Morethan 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: 400 mmband length: 680 mmstroke: . mmtotal power requirement: . kWweight of the machine ca.: . tdimensions of the machine ca.: . mwith contents see photosThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us Morethan 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
saw blade diameter: 800 x 800 x 1500 mmcutting diameter: 200 mmstroke: 150 mmdimensions of the machine ca.: mtotal power requirement: 3 kWweight of the machine ca.: tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: 220 mmsaw band length: - mmcutting width: - mmtotal power requirement: 0,7 kWweight of the machine ca.: 0,240 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting speed: 15 - 125 m/mincross cutting section: 260 mm²band length: 4.115 x 41 x 1,1 mmcutting width: 260 x 260 mmBand Saw | KASTO - SSB 260 VAThe machine is in a well-maintained condition.Please note that the technical details were added from comparable machines.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: SSB260VA | SSB-260VA | SSB260 VA | SSB 260VAThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting speed: 15 - 125 m/mincross cutting section: 260 mmband length: 4.115 x 41 x 1,1 mmcutting width: 260 x 260 mmBand Saw | KASTO - SSB 260 VAThe machine is in a well-maintained condition.Please note that the technical details were added from comparable machines.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: SSB260VA | SSB-260VA | SSB260 VA | SSB 260VAThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
dimensions of saw-band: 3650x27x0,9 mmspeed: 15/100 m/mincapacity 90 degrees: round: 280 mmcapacity 90 degrees: square: 260 mmcapacity 90 degrees: flat: 330x260 mmcapacity 45 degrees: round: 260 mmcapacity 45 degrees: square: 250 mmcapacity 45 degrees: flat: 270x200 mmcapacity 60 degrees: round: 180 mmcapacity 60 degrees: square: 170 mmcapacity 60 degrees: flat: 170x170 mmtotal power requirement: 2,2 kWweight: 1240 kgvice: 340 mmdimensions: 2020x2040x1740 mmControl: Electro-hydraulic fully automatic band saw with additional, semi-automaticFunction, for cuts from 0 ° to 60 ° left.Compact machine with the new Windows CE based MEP-50 controllerand 7 touch-screen display for managing all machine parameters.Easy operation and control of all cutting parameters in real time.Material feed with stepper motor via ball screw, which are mounted on opposite ball bearings,Single stroke 600 mm - rep ...
cutting diameter: 335 mmsaw band length: 4400 x 34 x 1.1 mmcapacity 90 degrees: flat: 500 x 335 mmcapacity 45 degrees: round: 305 mmcapacity 45 degrees: flat: 305 x 335 mmcapacity 60 degrees: round: 180 mmcapacity 60 degrees: flat: 170 x 335 mmclamping range: 0 - 500 mmwork height max.: 750 mmcoolant capacity: 100 lengine output: 3.0 kWweight: 1320 kgrange L-W-H: 1450 x 2350 x 1950 mm in a well-kept condition current new price machine approx. 35.000 euros special price on requestEquipment:- robust electro-hydraulic mitre bandsaw semi-automatic (INDUSTRY) Particularly suitable for universal use in a variety of applications. cross-sections, materials and frequently changing miter cuts Semi-automatic sawing sequence with workpiece clamping-sawing-raising- Central machine operation- stepless manual miter adjustment miter adjustment 45°li - 90° - 45°re - 30°re Digital actual angle ...
saw blade diameter: 350 x Ø 32.0 mmcapacity 90 degrees: flat: 175 x 75 mmcapacity 90 degrees: square: 110 x 110 mmcapacity 45 degrees: flat: 100 x 80 mmcapacity 45 degrees: square: 85 x 85 mmturning speeds: 3000 U/mintotal power requirement: 1.5 kWweight of the machine ca.: 180 kgdimensions of the machine ca.: 870 x 710 x 1435 mmEquipment :- semi-automatic circular saw for cutting PVC and aluminum profiles- two-hand safety operation- Miter adjustment : left 0 / - 45 / - 60 right 0 / 45 / 90- Large protective hood, covers entire working area- Saw blade- 2x vertical pneumatic clamping cylinders- Adjustable blade and cutting feed- Air dust gunWork sequence1) Setting the cutting angle2) Inserting the material3) Adjusting the stroke speed4) Bring the clamping cylinder up to 20 mm of material5) Clamp the material6) The machine is ready for operation by pressing the start button.7) Press and h ...
