We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
usava
CONTROLS PLC SIEMENS S5 PRESS DESIGN drive system: eccentric / crank frame design: H-frame, monoblock openings in uprights: yes number of suspensions: 2 number of slide actions: 1 table cushion: yes quick die change system: yes feedstock transport direction: left to right PRESS FORCES total force (nominal): 400 to nominal work capacity: 32 kNmPRESS TABLE table surface (left-right): 2600 mm table surface (front-back): 990 mm thickness of bolster plate: 200 mm height above floor level: 800 mm opening in bed (left-right): 2250 mm opening in bed (front-back): 280 mmSLIDE slide force: 400 to table surface (left-right): 2600 mm table surface (front-back): 990 mm & ...
usava
PRESS DESIGN drive system: eccentric / crank frame design: H-frame, monoblock openings in uprights: yes number of suspensions: 2 opening in table: yes feedstock transport direction: left to right PRESS FORCES total force (nominal): 350 to nominal work capacity: 50 kNmPRESS TABLE table surface (left-right): 1550 mm table surface (front-back): 1300 mm thickness of bolster plate: 250 mm opening in bed (left-right): 1300 mm opening in bed (front-back): 350 mmSLIDE table surface (left-right): 1400 mm table surface (front-back): 1100 mmSLIDE (MECHAN. PRESS) slide adjustment: 150 mm stroke min.: 20 mm stroke max.: 200 mm stroke rate (min.): 20 /min stroke rate (max.): 100 ...
usava
IHI Transfer Press Model SL4-1600-450-220. Com o NC Feeder, sistema de transferência, incluindo robôs. Novo : 1984 Capacidade : 1600 toneladas Curso: 850mm Altura do die :1400mm Ajuste do deslizamento : 500mm Não. de Curso: 16R. P.M Área de reforço : 4500 x 2200mm Pressão do ar de trabalho da embraiagem : 4,5kg/cm2
usava
PRESS DESIGN drive system: eccentric / crank frame design: H-frame, tie rod openings in uprights: yes table cushion: yes feedstock transport direction: left to right PRESS FORCES total force (nominal): 200 toPRESS TABLE table surface (left-right): 1780 mm table surface (front-back): 1300 mm opening in bed (left-right): 1445 mm opening in bed (front-back): 260 mmSLIDE slide force: 200 to table surface (left-right): 1500 mm table surface (front-back): 1100 mm stroke: 178 mm stroke rate (max.): 120 /minSLIDE (MECHAN. PRESS) slide adjustment: 150 mm stroke rate (min.): 20 /min stroke rate (max.): 120 /minDIE CUSHION (TABLE CUSHION) number of cushions: 11 cushion force: ...
usava
pressure: 2500 ttable length: 5200 mmtable width: 2300 mmPRESS FORCES: • CAPACITY : 2500ton• Point pressure capacity: • - Upper 1600t• - Down 900ton• Slide stroke: 650mm• Slide adjustment: 225mm• Slide stroke number: continue 9~25spm • Die-height: 1250mm• Slid size(LxR ,FxB): 5400x2400mm• Bolster size(LxR, FxB, T): 5200x2300x200mm• Balance capacity: 30ton• Main motor: DC 355kw• Feed back(bolster upper side): 700,780mm• Feed back stroke : 550,700,1000mm• Cramp stroke : 0-250mm• Lift stroke: 0~150mm• Transfer inner size(cramp): 650~2200mm • Die cushion capacity• No.1 station 120ton• No.2 station 80ton• No.3 station 60ton• No.5,6,7 station: 5ton• Stroke: 200mm• Bed size: 480x1780mm• Stop time: 430msThe data for this ad was created with ModulMWS - the software solut ...
usava
PRESS DESIGN drive system: eccentric / crank openings in uprights: yes feedstock transport direction: right to left PRESS FORCES total force (nominal): 315 to nominal work capacity: 45 kNmPRESS TABLE table surface (left-right): 2250 mm table surface (front-back): 1100 mm thickness of bolster plate: 150 mm height above floor level: 1000 mmSLIDE slide force: 315 to table surface (left-right): 2250 mm table surface (front-back): 880 mm stroke: 210 mm stroke rate (max.): 80 /minSLIDE (MECHAN. PRESS) slide adjustment: 120 mm stroke rate (min.): 25 /min stroke rate (max.): 80 /min main drive power: 60 kWSLIDE EJECTOR / CUSHION working principle: pneumatical nominal force: 1. ...
usava
KRUPP PST-A 160 transfer press construído em 1980. Dados técnicos da imprensa KRUPP PST-A 160: - pressão nominal: 160 toneladas - força de corte grau 1: 400 KN - força entre stands: 1200 KN - número de etapas de trabalho, incluindo fase de corte: 11 - distância entre stands: 200 mm - traçado de slider: 210 mm - profundidade de desenho: 70 mm - gama de saltos, infinitamente ajustáveis: 15-75/min. - gama de saltos de produção com repetibilidade da sua configuração: 25-75 /min. - número de movimentos de acionamento: 15-25/min. - um recurso de trabalho utilizável para um salto na gama de 25-75 tacadas por minuto. : 20.000 J - carga máxima num único passo: 500 KN - carga máxima de um único passo utilizando inserções: 630 KN - largura máxima da fita: aprox. 340 mm - diâmetro máximo do corte: 120 mm - diâmetro mínimo do padrão: 30 mm - distância e ...
usava
PRESS DESIGN number of slide actions: 12 SLIDE stroke: 60 mm stroke rate (max.): 210 /minDIMENSIONS / WEIGHTS total weight approx.: 3200 kgNumber of station 13 (12+1).Capacity on any one station 3 tons.Max stroke 60 mm.High speed cams.Max shell height 27 mm. (height of the produced piece)Max blank diameter 47 mm.Operating speed range 70 to 210 SPM max.Standard spring fingersDrive - Emerson VVF driveTransprobe MK7 (inoperative)Feed - single rowCams - ful follow2 transfer slides included - standard and wide.Video available on demand
usava
CONTROLS PLC PRESS DESIGN drive system: eccentric / crank number of slide actions: 12 PRESS FORCES total force (nominal): 36 toSLIDE slide force: 3 to stroke: 38 mmSLIDE (MECHAN. PRESS) variable speed: yes main drive power: 4 kWOVERALL SPECIFICATIONS (COIL LINES) sheet width max.: 50 mm feedstock transport direction: front-back STRIP-FEEDER feeder type: roll feeder sheet width max.: 50 mm pilot release system: no band lubrication system: optional TRANSFER SYSTEM number of tool stations: 13 distance between tools, stroke X fixed: 63.5 mmELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequency: 50 HzDIMENSIONS / WEIGHTS space requirements -left/right-: 2400 mm ...
usava
PRESS DESIGN number of slide actions: 12 PRESS FORCES total force (nominal): 36 toSLIDE stroke: 44 mm stroke rate (max.): 160 /minThis machine will have the following installed/added to ito new lubricationo new electrical installationo new protectionso CE conformityNumber of station 13 (12+1).Capacity on any one station 3 tons.Max stroke 44 mm.Standard stroke cams.Max blank diameter 47 mm.Operating speed range 40 to 160 SPM max.Machine weight approx. 3200 kg.
usava
CONTROLS PLC SCHNEIDER PRESS DESIGN drive system: eccentric / crank number of slide actions: 11 feedstock transport direction: left to right PRESS FORCES total force (nominal): 66 toSLIDE slide force: 6 to stroke: 114 mmSLIDE (MECHAN. PRESS) variable speed: yes stroke rate (min.): 40 /min stroke rate (max.): 130 /min main drive power: 7.5 kWSTRIP-FEEDER feeder type: roll feeder TRANSFER SYSTEM distance between tools, stroke X fixed: 82 mmDIMENSIONS / WEIGHTS space requirements -left/right-: 2875 mm space requirements -front/back-: 1500 mm total height: 2900 mm total weight approx.: 7500 kgATTACHMENTS (PRESSES) safety guard / safety door: yes 2-hand engagement: yes n ...
usava
PRESS FORCES total force (nominal): 72 toA new electrical control system and a mechanical and lubrication rebuild are required.One used PLATARG model 611 transfer press, high speed type.Full follow cams.Number of stations: 12Number of rams: 11 + 1 slaveCapacity on any one ram: 6 tonsSpeed range: 30 – 120 SPMMax shell height: 20 mmTransfer slideMachine awaiting refurbishment
usava
PRESS DESIGN number of slide actions: 11 SLIDE stroke: 114 mm stroke rate (max.): 90 /minTOOL ASSEMBLY DIMENSIONS shut height (stroke down, adjustment up), BDC: 127 mmDIMENSIONS / WEIGHTS space requirements -left/right-: 3000 mm space requirements -front/back-: 1470 mm total height: 2900 mm total weight approx.: 9980 kg• Slide type – FOD• Allen Bradley 1336 VVF drive• Feed – single row• Cams – full follow• Max shell height 54 mm• Max blank diameter 80 mm• Tooling to suit Parker refills. Also tooling to suit Lamy refills. Press is currently fitted with an extender ram • Pressmate mechanical stagger feed – not currently fitted to the press• Rudi HUTT pen refill packaging machine with feeding devices
usava
PRESS DESIGN drive system: eccentric / crank number of slide actions: 10 SLIDE stroke rate (max.): 110 /min10 stations + 1 auxiliary5 ton per stationDistance between stations: 54 mm (2-1/8")STROKE OF CAMS (STANDARD)#1 25-35 mm (1- 1-3/8")#2 to #10 25-41 mm, (1 - 1-5/8")Speed: 110 SPM
usava
PRESS DESIGN drive system: eccentric / crank number of slide actions: 6 table cushion: yes 6 stations plus auxiliary stationUsed for eyelet production - tooling still mounted
usava
PRESS DESIGN drive system: eccentric / crank number of slide actions: 6