Fabricante:
(Categoria: 206)
working table size: 3000 mm x 1500 mm; emergency stop switch: no; operational vacuum: -0,85 bar; vacuum pump output: 40 m³/h; pump capacity: 1,5 kW; noise level: 70 Db; heating system temperatur: max. 200 °C; heating system: 16 kW; machine length: 3100 mm; machine width: 1650 mm ; machine height: 1100 mm; weight: 850 kg; Membrane vacuum presses of TF series are specially designed for preheating and shaping of solid surface materials (Corian, Hi Macs, Staron, Hanex, Kerrock and others), as well for acrylic material and for thermoplastic forming. TF series vacuum presses are combined solution of including functions of two separate machines: vacuum press and preheating oven, and this greatly increases functionality of the press. ThermoformingPreheating and 2D and 3D vacuum forming of thermoplastic and acrylic materials. Production of worktops, sinks, shells, bar counter ...
Pressing area: 3000mm x 2100mm; Crimping depth: Pressed elements vertical: 5; Pressure build-up: hand-hydraulic; Press pressure: Cylinder stroke: approx. 100mm; Machine length: 3000mm; Machine width: 800mm; Machine height: 2500mm; Weight: 2000kg;
Pressing area: 3000 mm x 1800 mm; Design: free-standing; Working Area: 1460mm x 2900mm; Number of manual hydraulic cylinders: 4; Pressing pressure per cylinder: 2000 kg; Cylinder stroke: 70 mm; Hold-down: 1; Machine length: 2900mm; Machine width: 900mm; Machine height: 2000mm;
table size: 3000mm x 1500mm; pressure: -0,85 bar; machine length: 3100mm; machine width: 1450mm; weight: 480kg;
table size: 3000mm x 1500mm; pressure: -0,85 bar; machine length: 3100mm; machine width: 1450mm; weight: 425kg;
Pressing area: 3000 mm x 1800 mm; Number of manual hydraulic cylinders vertical: 4; Number of manual hydraulic cylinders horizontal: 2; Press pressure: 1500 kg; Machine length: 4000 mm; Machine width: 750 mm; Machine height: 2250 mm; Chassis on wheels, two of which are steeredManual hydraulic cylinders height-adjustableVertical sliding posts
pressing area: 3000mm x 1300mm; opening: 450mm; heating: electrically / thermo-oil; max. temperature: 120°; plate sourface: stainless steel; press opening: automatically - timer / manual; emergency stop switch: yes / ripcord; pressure: 120t; number of cylinder: 6; electriticy: 36A; motor power: 21 kW; machine length: 3600 mm; machine width: 1800mm; weight: 4500kg;
pressing area: 2500mm x 1250mm; opening: 360mm; heating plate top: elektric; heating plate bottom: defective; plate surface: ALU - anodized; pressure: 90t; number of cylinder: 4; electricity: ca. 33A; machine length: 3000 mm; machine width: 1500mm; weight: 4000kg;
working width: 630mm; feed: 7m/min;
Stand projection: 900mm; Feed: 15 m/min;
Prensa briqueteira Schuko Compacto 1600 S Muito bom estado, ano de construção 1994, tipo SC 1600 S - BL, Fabr.Nr.: 386, Por favor, repare no vídeo do produto! Imprensa: Hidráulica 5,5 KW 380 V, arrefecimento hidráulico 0,21 KW, capacidade de briquetação aproximadamente 85Kg/h Pressão de pressão 190 bar controlável, depósito hidráulico 110 litros, Sistema central de lubrificação Schuko (usar manualmente conforme necessário) Gabinete de controlo: Módulo de controlo Möller PS3, software SUCOSOFT S3 Contentor de cavacas SPS 1600 (capacidade de 1,6 cbm) com parafuso de descarga e agitador de cavacos de 1,5 KW, Diâmetro do bico de enchimento 500 mm, tamanho do recipiente de chips 1500 mm x largura 1500 mm, Um dispositivo de sucção em chip está montado no bico de enchimento com uma mangueira de sucção, e o motor de 220 V pode ser ligado separadamente. ...
355 x 185 cm, 3 selos no topo, 2 de lado Máquina usada
Frame press, gluing press -operated: hydraulic -Working area up to: 3500 x 2400 mm -Wood clamping: pneumatic -Display dimensions: 4200/1100 / H3700 mm -Transport dimensions: 4200/1200 / H2300 mm -Weight: approx. 3500 kg
Offered is an ODMI molded part press, year approx. 1980. 4 hydraulic cylinders, 1-4 cylinders, hydraulic pressure max/min 250bar/30bar, pressing force up to 50t per cylinder, 2 pressing stations, automatic operation, opening height 1120mm, cylinder stroke approx. 800mm, piston diameter 160mm, piston area per cylinder 201cm². Table size X/Y 745mm/2140mm, known defects: pull cord not correctly wired according to press inspection, emergency stop not up to current standard. Right cylinder with slightly leaking piston seal. Dimensions X/Y approx. 3200mm/1300mm, weight approx. 8000kg. Inspection possible by arrangement.
Máquina de exposição MOVE - a prensa a vácuo de alta precisão com uma superfície gigantesca utilizável para colagem a vácuo e revestimento a vácuo de peças dobradas. Com total flexibilidade, devido à mobilidade total e ao mecanismo revolucionário de dobragem, reduzir a pegada para 45% quando dobrado. Prensa a vácuo de alta precisão com abertura de aba incluída. ⦁ Mecanismo revolucionário de dobragem (redução da área para 45%) ⦁ Bomba de vácuo de alto desempenho de 40 m³ (até 900 mbar (9 t/m²)) opcional, desligamento automático quando a pressão é atingida (com grande volume de vácuo) ⦁ Regulação de pressão 400 a 900 mbar, ecrã analógico de pressão de vácuo ⦁ Membrana de borracha natural altamente elástica (até +130 °C) ⦁ Sistema de troca rápida do diafragma ⦁ Bancada de trabalho estável em resina fenólica (até +160 C) ⦁ A ...
Ligação elétrica 400V 13kW 2 placas de aquecimento a 1200 x 2250 mm Placas de aquecimento controladas por 2 termóstatos Pressão de pressão a 250 bar LxDxH: 2590 x 1330 x 1950 mm Peso aprox. 2800 kg Espessura da prensa: 380 mm
An OTT heating plate press is available. Pressing area X/Y: 2250mm/1200mm, heating plates: 2, connected load: 14kW, pressing force: approx. 65t, max. pressing height: 300mm, machine dimensions X/Y/Z: approx. 2600mm/1350mm/1800mm, weight: approx. 3300kg. An on-site inspection is possible.
Press capacity: 50 ton Ram stroke adjustable: 16 - 51 mm Slide adjustment: 78 mm Shut height (stroke down, adjustment up): 300 mm Table surface area : 930 x 590 mm Number of strokes: 620 - 1.120 s.p.m. Required power: 40 kW Dimensions L x W x H: 3.900 x 1.400 x 3.065 Weight of machine approx.: 9 ton
Prensa de quadro MAWEG com ajuste automático de altura e largura Tamanho da prensa 4,50 m.x 2,60 m. Tamanho da prensa do quadro: 5,30 x 3,40 x 1,30 m.
pressure: 800 tdistance between columns: 3550 mmstroke: 1100 mmdistance table/ram, max. stroke up, adjustment up: 1900 mmtable surface area: 3500 x 1800 mmdie-cushion pressure inside the table: 350 tstroke of drawing cushion in table: 295 mmdie-cushion pressure in pusher: 80 tstroke of drawing cushion in pusher: 160 mmram surface: 3500 x 1800 mmdie-cushion inside the table: hydraulic, controlled die-cushion in pusher: hydraulic, controlled sliding table: without rails for travel total power requirement: kWweight of the machine ca.: 265 tdimensions of the machine ca.: moverhauled in 1998The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 1600 tdistance between columns: 3160 mmram stroke: 1450 mmdistance table/blankh.,max. stroke up,adjustm. up: 2250 mmtable surface area: 4000 x 2200 mmram pressure: 1000 tpressure of blank holder: 600 tstroke of blankholder at the bottom: 1000 mmstroke of blankholder with adjustment 0-100 mm: 1450 mmblank holder size: 4000 x 2200 mmdie-cushion pressure inside the table: 360 tstroke of drawing cushion in table: 275 / 400 mmram surface: 4000 x 2200 mmcolumn travel -side: 1100 mmdie-cushion inside the table: hydraulic, controlled die-cushion in pusher: hydraulic, controlled oil volume: 9000 ltotal power requirement: 390 kWweight of the machine ca.: 250 tdimensions of the machine ca.: 6,0 x 4,3 x 10,5 mHead press (1600 tons) of a press line with five subsequent presses (800 tons)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 30 tdistance between columns: 1200 mmstroke: 500 mmtable surface area: 1200x1000 mmram surface: 600x400 mmtable height: 850 mmtool hole in ram: Ø 40 mmweight of the machine ca.: 4 tdimensions of the machine ca.: BxTxH 2400x2200x3400 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Prensa de colagem Emmes Tipo: H EBP 500 . 10 Comprimento de trabalho 5000 mm Altura de trabalho 1530 mm Largura ou profundidade do suporte 150 mm 10 Punção de prensa vertical hidráulica 5 dispositivos pneumáticos de retenção frontal força de compressão máxima 150/cm² Bomba hidráulica 2,2 kW Pressão do óleo 159 kg/cm Pressão de ar 8 kg/cm²
pressão: 250 tdistância entre colunas: 600 mmcurso: - mmrequisito de potência total: 22 kWpeso da máquina ca.: 9 tdimensões da máquina ca.: 2 x 2 x 3,2 mNo. 3421Prensa de molde 2500 / 700 kNInterruptor de pé de curso único de 2 mãosInterruptorde pé de curso único de funcionamento contínuo automático e basculanteTabela 500 x 500Faixa de trabalho: Capacidade de pressão 250 toneladasMovimentação: ^22
pressure: 600 tram surface: 3600 x 2500 mmstroke: 350 mmControl: Siemens S 7 no. of strokes: 11 - 44 Hub/mintable surface area: 3600 x 2500 mmram adjustment: 400 mmmaterial width: 500 - 1950 mmmaterial thickness: 0,6 - 2,5 mm mmcoil weight: 35 tcoil external diameter: 900 - 1900 mmcoil internal diameter: 610 mmno. of straightening rolls: 13 straightening roll diameter: 50 mmStack height: 400 mmstations: 2 total power requirement: kWweight of the machine ca.: 390 tdimensions of the machine ca.: mwith reel, Rstraight out Unit, (conveyor system Schleicher) and stacking unit(NSM)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 800 tdistance between columns: 2560 mmstroke: 1050 mmcontrol: Siemens S5 distance table/blankh.,max. stroke up,adjustm. up: 1870 mmtable surface area: 2500 x 1730 mmdie-cushion pressure inside the table: 300 tstroke of drawing cushion in table: 395 mmdie-cushion pressure in pusher: 63 tstroke of drawing cushion in pusher: 150 mmram surface: 200 mmdie-cushion in pusher: hydraulic, controlled die-cushion inside the table: hydraulic, controlled total power requirement: 200 kWweight of the machine ca.: 150 tdimensions of the machine ca.: 4,95 x 3,3 x 10,2 moverhauled in 2005The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 600 tdistance between columns: 2600 mmstroke: 900 mmdistance table/blankh.,max. stroke up,adjustm. up: 1600 mmtable surface area: 2500 x 1730 mmdie-cushion pressure inside the table: 250 tstroke of drawing cushion in table: 400 mmdie-cushion pressure in pusher: 63 tstroke of drawing cushion in pusher: 150 mmram surface: 2500 x 1730 mmcolumn travel -side: 1100 mmdie-cushion inside the table: hydraulic, controlled die-cushion in pusher: hydraulic, controlled total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: moverhauled in 2005The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensões de trabalho X/Y: 3000mm/2000mm, curso do cilindro: 1000mm, ajuste de altura: 2000mm-2600mm, ajuste de comprimento: 3000mm-6000mm, força de compressão: 2t, requisito de espaço: 4100mm/1000mm/2450mm, peso: aprox. 1500kg. Documentação disponível. É possível uma inspeção no local.
Estão disponíveis duas prensas Ital aquecidas de construção idêntica. Comprimento da prensa: 1700mm, largura da prensa: 1500mm, altura da prensa: 1400mm, força de prensagem: 800kN, conexão total: 30kW, dimensões da máquina X/Y/Z: aprox. 5400mm/2300mm/3200mm. Incluindo pistão de cima, acessórios para assentos de cadeira e aquecimento. Documentação disponível. É possível uma inspeção no local.
-) Superfície da prensa: 3.100 x 1.600 mm -) Cilindro: 8 cilindros -) Pisos: 5 pisos, 6 placas de aquecimento -) Placas de aquecimento: placas de aquecimento de aço perfuradas de 40mm -) Aquecimento: para água quente ou óleo térmico (até 200° -) Abertura da prensa: até 600 mm -) Refrigeração: com unidade própria Etc.
Graf Maschinenhandel GmbH
