prensas para madeira usadas para venda (305)

Capacity: 3000 x 1900 m.4 x horizontal presses2 x vertical pressure beamsHydraulic pump with 3 kW motor

Min/Max. workpiece length 1800 / 4200 mm.Max. profile height 200 mm.Min. Workpiece thickness 16 mmWorking height 950 mm.Power installed 12 kW

Min/Max. workpiece length 1800 / 4200 mm.Max. profile height 200 mm.Min. Workpiece thickness 16 mmWorking height 950 mm.Power installed 12 kW

Roller length 1820mmRoller diamter 145mmRubber thickness 9mmRubber hardness SHORE 50AWorking plane height 910mmMax passage between rollers 120mmForwarding speed 15,2 m/minRequested air Bar 4/8Motor power 0,37 kW

Briquetting press MATEC F-Cube 20 novo Dimension press LxWxH: 130x74x112 cm peso 233 kg Briquette quadrado 30x30 mm Capacidade aprox. 10-25 kg de briquetes /hora Funil de alimentação de tamanho aprox. 0,33 m3 Bomba hidráulica motora 2,2 kW, 3x 400 V, 50 Hz Consumo de eletricidade aprox. 1,1 kWh Como trabalhamos operação contínua Ano de construção 2021 Opções adicionais: - Linha de extensão para briquetes com suporte -Automático. Sistema de paragem inicial para funcionamento com monitorização de nível - Sensores para monitorização de nível - Óleo hidráulico 30 litros - Cabo de 3 m com ficha euro 16 A - Prensa de filtro de ajuste de Flange O espectro. A densidade de briquetes é de cerca de 900 kg/m3. O teor máximo de humidade da madeira é de 15%. O nível de ruído medido é de 62 dB. Máquina nova, pronta para funcionar. Sujeito a al ...

Pressão de moldura hidráulica Hungerbühler Medição de Imprensa: 4100 x 3050mm 3 cilindros verticais 3 cilindros horizontais Ajuste de altura através de caixa de controlo Ajuste de largura através de caixa de controlo Suportes na parte inferior para colar asas em altura de trabalho. A máquina encontra-se em bom estado de conservação, pronta para funcionar. Sujeito a alteração, erro, venda prévia! Peças de serviço/peças sobressalentes por MATEC CH-4952 Eriswil/DE-79618 Rheinfelden Sistema MATEC + technik GmbH Engenharia mecânica Moinho Tapete 4 CH-4952 Eriswil/Suíça Telefone 0041 62 966 18 32 Fax: 0041 62 966 21 12

This FORMAT4 HVP Typ 4 was manufactured in 2019. Designed for integration with existing heating systems, it can press at temperatures up to 90°C. The robust steel platen supports a maximum pressure of 5kg/cm², making it ideal for veneer processing. Consider the opportunity to buy this FORMAT4 HVP Typ 4 veneer press. Contact us for more information about this machine.

This OTT ST 1611/60 veneer press was manufactured in 1996. It features a maximum pressing force of 70 tons, pressing plates measuring 1300x1611 mm, and a power output of 10.1 kW. The plates are electrically heated, enhancing its efficiency. Consider the opportunity to buy this OTT ST 1611/60 veneer press. Contact us for more information.

Prensa ORMA de 3 andares NPC 26/14-3V + descarga Höllenholscher Kühlstern do local para venda.

Wemhöhner VOF2-250/2 linha de prensa contínua concluída na localização 98693 Ilmenau OT Langewiesen à venda.

This WEMHÖNER Variopress Basic 1000S was manufactured in 2018. Ideal for efficient laminating processes, this machine ensures consistent performance. Consider the opportunity to buy this WEMHÖNER Variopress Basic 1000S laminating press. Contact us for more information.

Prensa briquete Spänex SHB 250 Ano de construção: 2019 Tamanho da briquete: 72 x 127 mm - 8 quadrados Capacidade de prensagem: 250 kg/h (dependendo do material) Dissipador de óleo Pressão do sistema: 280 bar Carga total ligada: 14 Kw Controlo: Siemens Simatic HMI Horas: 7900 Silo de material Spänex tipo R III-F Dimensões: 2,20 m x 2,20 m x 1,80 m (sem pés e carcaça insuflável) Altura total do corpo: 3,50 m Incluindo válvula rotativa e agitador

Joos Veneer Press HP 65/2 Tamanho do painel 1100 x 2500 mm ges. Pressão de pressão: 650 kN Altura da prensa: 400 mm Número de cilindros: 4 Dimensões básicas: 2900 x 1300 x 2040 L-W-H Máquina usada Condição: super Preços: carga gratuita mais IVA

Spänex briquette press with extraction system Type SHB 50 R Year of construction 1998 with extraction system, with chip container Briquette press Briquette mould round diameter 70 mm Capacity 50 kg/h Flow rate 0.45 m³/h Drive motor chip press 5.5 kW With control cabinet, control Spänex extraction system Filter Hose Number 42 Filter Hose Material Polyester Needle Felt With transport fans Fan 3.0 kW and 7.5 kW Filter area approx. 45 m² Capacity approx. 4,800 m³/h Dimensions 2200 mm x 1500 mm x H 2980 mm Weight of the press 650 kg Almost all shredded materials can be briquetted with a residual moisture between 6% and 18% without binder. e.g.: wood shavings, milling and sawdust, dust, paper, cotton flaky, coconut, wheat straw, hemp, hay, flax, plant stems, malt germs, ... The maximum chip size should not exceed 20 x 1 mm. Briquettes have a volume reduction ...

Dimensões do painel 2,2x1,25 m A máquina está funcional, mas os cilindros estão a vazar. A venda está no estado em que está, exceto Garantia, do nosso armazém em Düsseldorf, carregado livremente.

Capacity: 250 ton V ? Ring nominal force: 30 - 125 ton Counter ram nominal force: 30 - 125 ton Ram stroke: 67 mm Table surface area : 560 x 600 mm Slide area: 560 x 560 Number of strokes: 80 s.p.m. Weight of machine approx.: 14.000 kg

This F&O 03035 laminating press was manufactured in 2003. It features a working width of 1300 mm and a melting unit capacity of 200 kg. The outfeed roller conveyor is approximately 9000 mm long. In 2024, the infeed conveyor was upgraded with 4 brushes and radiant heaters. Consider the opportunity to buy this F&O 03035 laminating press. Contact us for more information.

Prensa Briquette WEIMA C150, ano de construção 09/2008, Masch-Nº 910-483, 5,5 kW, diâmetro da briquete aproximadamente 50 mm, com descarga do agitador (apenas fundo com parafuso e agitador) 3370x2995 mm, sem paredes laterais A máquina é totalmente funcional (vídeo MP4 com a máquina a correr a pedido)

Prensa de folheado Bürkle Com 2 pisos Tipo S 100 250/130 Tamanho do painel: 2550 mm x 1300 mm Prensa de deck com 2 prateleiras Abertura máxima entre os painéis aproximadamente 350 mm Prensa Hidráulica Prensa a Frio Força de imprensa 100 toneladas. Pressão superficial 3,1 kg/cm Número de cilindros: 6 peças Diâmetro do pistão 80 mm Guia de cremalheira e pinhão Corrente nominal 5,4 A Frequência 50 HZ PH atual tipo 3 Tensão de funcionamento 3 PH Dimensões aproximadas. 3350 mm x 1525 mm x Altura 1845 mm

This Columbus Vacuformtisch XL was manufactured in 2006. A used vacuum press with a total length of 3100 mm, width of 1550 mm, and height of 1000 mm. It offers a usable area up to 2900 mm by 1300 mm, with a total pressure capacity of 29 tons. Ideal for diverse laminating needs. Contact us for more information about this machine.

This BURKLE BTF 1628 laminating press was manufactured in 1998. It features a max panel size of 1250x2550 mm, panel thickness range of 6-35 mm, and a heating plate dimension of 1600x2800 mm. Equipped with a Siemens control system and a total power requirement of 38 kW. Consider the opportunity to buy this BURKLE BTF 1628 laminating press. Contact us for more information.

This thermo lamination system was manufactured in 2001. The BÜRKLE FFAII 1300 features a working width of 1300 mm and handles panel dimensions from 200 to 1300 mm in width and 400 to 3000 mm in length, with thickness ranging from 8 to 40 mm. It includes a thermal oil heater, smoothing calender, and a comprehensive transport and laminating system. Ideal for high-efficiency thermo lamination processes. For more information about this thermo lamination system, please reach out to us.

This Columbus MULTIMAT laminating press was manufactured in 2013. It features a large press table measuring 3000 x 1400 mm, ideal for handling substantial materials. Consider the opportunity to buy this Columbus MULTIMAT laminating press. Contact us for more information.

This LIGMATECH MPP 15 laminating press was manufactured in 1998. A robust and reliable choice for your laminating needs, it represents a solid addition to any production line. Contact us for more information.

This Hüttenhölscher Body Press was manufactured in 2000. Ideal for efficient carcase pressing applications, it represents a reliable choice for your production needs. Contact us for more information.

This DIMTER PROFIPRESS L2500 was manufactured in 2007. A robust used gluing press, it features a press bed of approximately 2500 x 1300 mm and a stable base frame. It includes a motor-driven multifunctional pusher and an automatic gluing station with a precision glue head. Ideal for both softwood and hardwood, it ensures even pressure distribution and high vertical pressure for low offset. Contact us for more information about this machine.

This OTT 300-K-D0 was manufactured in 1996. A robust veneer press featuring plate dimensions of 2550 x 1350 mm and hot water heating. It includes 6 pressure cylinders with a total pressing force of 135 tons. Consider the opportunity to buy this OTT 300-K-D0 veneer press. Contact us for more information about this machine.

working table size: 3000 mm x 1500 mm; operational vacuum: -0,85 bar; vacuum pump output: 25 m³/h; pump capacity: 0,75 kW; noise level: 70 Db; heating system temperature: max. 60 °C; heating system: 4,5 kW; machine length: 3100 mm; machine width: 1650 mm ; machine height: 1650 mm; weight: 450 kg; The membrane presses of VP series are optimal solution for woodworking and a furniture production from all types of wood.The vacuum presses are equipped with heating system which allows reduce the time of drying glue and increase productivity of production. The heating temperature monitored and maintained automatically.The membrane presses of VP series can be used for small capacities but also for professional using.ConstructionThe sturdy welded construction with a removable feet’s.Work table from 12mm HPL board. HeatingHeating system with system of temperature control ...