subcategorias
(terceiro nível de categoria)
Fabricante:
(Categoria: 1020)
Defective, half-shell, 15019530 Auction-ID: A7-44234-36
Consisting of a total of 8 unit parts of approximately 615x305x325cm Equipped with 2x kitchen unit 2x toilet electric boiler approximately 8 electric heaters double glazing water and gas connection fully insulated partly equipped with concrete floors can be switched into 2 parts Auction-ID: A1-40100-2
Sale consists of: Steel structures, 22.5x70m + 20X23m Sheet pile wall sheets steel, Rockwool 60mm insulation, inner boxes steel. Steeldek roof plates, 3 roller doors, 1 wall with sandwich panels. Present calculations and drawings. Note: No roof insulation, no installations, flashings or frames, Dimensions: Hall 1 - Width: approx. 22.5 meters - Length: approx. 70 meters - height: approx. 6 meters Hall 2 - Width: approx. 23 meters - Length: approx. 20 meters - height: approx. 6 meters Auction-ID: A1-40100-1
Manufacturer: Epiroc Model: FlexiRoc D65 Type of Machine : DTH Surface Drill Rig UNIT 1 - Year of manufacture: 2019 - Total engine hours: 29,346 - Engine replaced | Hours on new engine: 10,288 - Drilling hours: 10,523 UNIT 2 - Year of manufacture: 2020 - Total engine hours: 26,274 - Engine replaced | Hours on new engine: 8,967 - Drilling hours: 10,000 UNIT 3 - Year of manufacture: 2020 - Total engine hours: 25,005 - Engine replaced | Hours on new engine: approx. 6,500 - Drilling hours: 9,372 Find more here - / Contact us at -
Manufacturer: Sandvik Model: Leopard DI650i Type of Machine : DTH Surface Drill Rig UNIT 1 - Year of manufacture: 2020 - Total engine hours: 19,041 - Engine replaced | Hours on new engine: 7,700 - Drilling hours: 7,355 UNIT 2 - Year of manufacture: 2021 - Total engine hours: 18,608 - Engine replaced | Hours on new engine: approx. 5,422 - Drilling hours: 7,443 Technical Details : - Drilling method: Down-The-Hole (DTH) - Hole diameter range: 115 to 229 mm (4.5 to 9.0 in.) - DTH hammer: Sandvik RH570 (4, 5 and 6 in.) - Flushing air capacity: 28.3 m3/min at 24 bar - Drill rod/tube diameter: 89, 102, 114, 127 and 140 mm (3.5, 4, 4.5, 5 and 5.5 in.) - Rotary head: MRH6 - Engine type: Caterpillar C15 (Tier 3 / Stage 5, Tier 4F) - Engine output power: 403 kW at 1,800 rpm - Cabin: iCab - Production capacity: 2.1 Mt/a (one shift) - Transport height: 3.5 m (11.5 ft) - Weight: 25,100 kg (55 ...
See complete description/ lot specification at files! Concerns linked office unit set of 8 units, see arrangement in photos Size per unit Length: approx. 9030 mm Width: approx. 2970 mm Height: approx. 3200 mm Equipped with double glazing; insulation approx. 14 cm; Affected units with serial number: 40073 (40076) 37072 37271 35351 37880 35114 36250 37149 Auction-ID: A1-40100-4
Hydraulic-mechanical 4 wheel cold milling machine for asphalt and concrete, milling drum between the rear wheels, milling width can be reduced by dismantling half shells of 250 mm each, hydromechanical drive, hydraulic steering (front axle as steering axle, front axle as steering axle, front axle as steering axle, hydraulic steering machine) Auction-ID: 04B-721-2
Equipped with insulated walls and roof; vinyl flooring; double-glazed plastic frames; drainage trough; plateau; lockable with key and button cylinder; folded dimensions 5890x720x2550 mm (transport dimensions); unused. There is no right of withdrawal.See the Auction Terms and Conditions for more information. The minimum age for visiting the viewing and collection days is 18 years. Visitors must be able to identify themselves. A forklift is available during the collection day. The maximum lifting capacity is 3 tonnes. Use of the forklift truck is entirely at your own risk. In addition, waiting times may occur. All irregularities and signs of wear may not be clearly visible on the images. It is strongly recommended that you take advantage of the viewing day to personally inspect and assess the condition and appearance of the lot. Auction-ID: A7-43911-50
Manufacturer: Terex Finlay Model: 883 Year of Manufacture: 2010 Machine Type : Mobile heavy duty screener Operating hours: 8867 h Find more here - / Contact us at -
Working height 9m, Lifting power 500 KG Battery and A220 Charger included Extendable platform self-propelled, solid wheels, levellers. Total dimensions 2250x950x2250 mm., Auction-ID: A7-44061-33
24 lashing straps and metal trunk with zippers Material: PES CE Lashing strap length: 8230 mm Tie-down strap width: 50 mm approx Lashing capacity: 5000 kg Overall dimensions 800x600x400 mm Auction-ID: A7-44061-35
SJY0.5-7 Lifting Platform Main parameters: Platform height: 7 meters Working height: 9 meters Load capacity: 500 kg Platform size: 2100 x 800 mm Net weight: 900 kg Technical Configuration: Platform: 3mm steel plate Scissors (structure): 120x60x4 mm / 50x100x5.5 mm tube Hydraulic cylinder: Diameter 80/40 mm 1 unit, with explosion-proof valve Pumping station: - With emergency lowering valve, integrated relief valve and overload protection Power source: Alternating current 220V / 50Hz / 1.1 kW Displacement: Manual Elevation: Electric (AC) Lifting speed: 4-6 meters per minute Overall dimensions 2250x950x2250 mm Auction-ID: A7-44061-7
Manufacturer: Kleemann Model: Mobicat MC 102 RH Year of Manufacture: 1999 Machine Type : Mobile Jaw Crusher Operating Hours : Approx. 17,000 hours (counter defective) The Mobicat MC 102 RH is one of the most widely used mobile crushing units in the Kleemann range, valued for its reliability, high throughput capacity, and ease of operation on quarry, recycling, and demolition sites. Find more here - / Contact us at -
Manufacturer: SEBA Model: Lite Track 70-40 New Evolution Year of Manufacture: 2022 Operating hours : 45 h Technical Specifications - Operating weight: 12,000 kg - Transport length: 5,300 mm - Working length: 8,630 mm - Width: 2,420 mm - Height: 2,750 mm - Engine: Yanmar diesel, 53.7 kW / 850-2,000 rpm - Travel speed: 0.7 - 1.3 km/h - Maximum gradient: 30% - Conveyor belt speed: 1.85 m/sec - Hopper capacity: 2.5 cubic metres - Output capacity: 10 - 45 cubic metres per hour - Jaw opening: 700 x 400 mm - Hydraulic jaw gap adjustment: 15 - 100 mm Standard Equipment and Features - Vibrating feeder with pre-screening grizzly - Reversible discharge conveyor for pre-screened material - Remote control for all machine movements, including 2 battery packs - Level sensor at crusher inlet - Magnetic separation belt - Anti-dust system - Lighting for night operation - Video camera moni ...
Manufacturer: LUTRO Model: KSP 6 BT Year of Manufacture: 2013 Maximum Vehicle Length: 5 m Maximum Vehicle Width: 3 m Maximum Vehicle Height: 3 m Maximum Roof Load: 700 kg Usable Area: 105 m² Total Room Volume: 144 m³ Air Capacity: 24,250 m³/h Air Speed: 0.26 m/s Fan Power: 8.26 kW Heating Output: 280 kW Maximum Temperature: 80 °C Gas Throughput: 280,000 kJ/h Gas Consumption (Full Load): 11.4 m³/h Fresh Air Requirement: 90 m³/min Minimum Burn Time: 1 min Certification: CE Find more here - / Contact us at -
attention! To participate in this auction, a deposit of € 25 is required, which will be withheld until the outcome of the contradictory verification of the state of the places and the prior deposition of safety documentation that can be consulted after the signing of an NDA. The deposit is to be paid by bank transfer to the current account in the name of Surplex Srl. To request further information: m.tosin@tbauctions.com Lot consisting of various construction equipment, including DEWALT hammer drill, HILTI hose, HILTI rotary hammer, various pallet trucks. The list drawn up by the expert is attached to this announcement. The lot includes the following works that must be carried out in this time order no later than 30 days from the award. The total removal of the goods and correct disposal of the remaining NON-FERROUS materials after removal. The complete floor cleaning of the respec ...
TRAKMIX – MOBILE CONTINUOUS MIXING UNIT First introduced in 2015, Trakmix is a tracked mobile continuous mixing unit designed for rapid deployment and high-volume production. Its tracked undercarriage eliminates the need for transportation permits, allowing easy movement between sites. Capable of producing up to 250 TPH, it delivers precise and consistent mixing for a wide range of construction applications. The unit is fully self-contained and can be set up in minutes via remote control, with complete weighing of all materials for operational accuracy. KEY FEATURES • Tracked undercarriage for ultra mobility • No transportation permits required • Continuous mixing capacity up to 250 TPH • Self-contained unit with onboard diesel generator • Integrated silo, hopper, mixer, and control panel • Rapid remote-controlled setup • Full weighing capability for all material ...
RAPIDMIX – MOBILE CONTINUOUS MIXING PLANT Rapidmix is a high-capacity mobile mixing system developed over two decades of engineering. It delivers accurate, reliable continuous mixing for large construction and civil projects. With output options of 400 TPH or 600 TPH, the plant provides outstanding productivity and cost efficiency. Fully self-contained and hydraulically erected, Rapidmix moves easily between sites and is ready for operation within minutes. The built-in weighing system ensures precise measurement and process control for all materials. KEY FEATURES • Mobile continuous mixing plant • Output options: 400 TPH and 600 TPH • Integrated weighing system for all materials • Onboard 6-cylinder diesel generator • Hydraulic setup for fast commissioning • Single-load road-towable transport • Automated control system with 15" touch-screen HMI • 40-tonne onb ...
TRANSBATCH – MOBILE CONCRETE BATCHING PLANT First launched in 2012, Transbatch is a single-load, fully mobile concrete batching plant designed for fast setup and efficient concrete production. With output capacities from 40 m³/hr to 100 m³/hr, it ensures precise batching through fully weighed cement, water, and aggregate measurement. Its compact structure folds for transport and can be installed in approximately 10 days, reducing onsite downtime. KEY FEATURES • Fully mobile, single-load batching plant • Output capacity from 40–100 m³/hr • Accurate weighing of cement, water, and aggregates • Quick installation to reduce downtime • Compact design that folds and partly dismantles for transport • Transportable as a single road-legal unit TECHNICAL HIGHLIGHTS Output • Production up to 100 m³/hr Weighing System • Full weighing capability for cement, water, ...
AMB pre-shredding machine type 753 The plant is already completely dismantled, incl. the hydraulic aggregates and would be ready for pick-up The machine was built in 2004 and was used by us for the pre-shredding of household and bulky waste. It then served as a backup from 2010 to 2022. We have already dismantled the machine and hydraulic unit and stored them on site. Before dismantling, we carried out another test run - without any problems. As the plant had already been dismantled, there was no time pressure. As part of the optimization of the system, the manufacturer AMB installed two additional drives for the shafts - as can be seen in the pictures. Find more here - / Contact us at -
Manufacturer: Freight Model: FL80 Year of Manufacture: 2002 Type of Machine : geotechnical drilling unit 10 wheels 8.3 L cumins engine. Perfect mechanical condition CVM good until April 2026 Equipment: CME-75 2002 Low torque mounted Find more here - / Contact us at -
Manufacturer: Genie Model: GS384 RT Year of Manufacture: 2008 Operating hours: 395 h Working height: 12.06 m Measurements (LxWxH): 389 x 213 x 268 cm - Height with handrails lowered: 200 cm Weight: 6806 kg Condition: Fully working, continuously serviced Find more here - / Contact us at -
800 € 
