Fabricante:
(Categoria: 302)
Materials: LDPE, LLDPE, mLLDPE, Metallocene, EVA, EVOH, PA // Film Width (Max): 1800 mm
Screw Diameter: 160 mm // Output Capacity: 1400 kg/h
Maximum Diameter: 800 mm // Minimum Diameter: 280 mm
Screw Diameter: 100 mm // Output Capacity: 600 kg/h
Extrusion line for drip irrigation
Screw Diameter: 27 mm // Throughput: 100 kg/h
Screw Diameter: 65 mm // Output Capacity: 170 kg/h
Screw Diameter: 140 mm // Throughput: 900 kg/h
Materials: PP // Film Width (Max): 1600 mm
Number Of Screws: 1 // Screw Diameters: 88
Screw Diameter: 75 mm // Throughput: 700 kg/h
Materials: LDPE, LLDPE, HDPE // Film Width (Max): 2100 mm
Materials: PET, APET, RPET, GRG, GAG, G-PET, PS, PP // Film Width (Max): 700 mm
Maximum Diameter: 110 mm // Minimum Diameter: 32 mm
Materials: LDPE, LLDPE, m-LLDPE, MDPE, HDPE, EVA, EVOH, Nylon 6, Co-Nylon, PLA // Film Width (Max): 2800 mm
Key data: 120 mm
Máquina de moldagem por sopro por extrusão BEKUM BA 200 – 500 kg/h – cabeça de acumulação de 8L À venda: máquina de extrusão Bekum modelo BA 200, ideal para processamento de PE e fabrico de peças sopradas de grande capacidade. Características principais • Marca / Modelo: BEKUM BA 200 • Ano: 1990 • Tipo: Soprador de extrusão por acumulador • Altura de acumulação: 8 litros • Número de cabeças: 1 • Número de estações: 1 • Material processado: PE • Capacidade de produção: até 500 kg/h • Número de extrusor: 1 • Diâmetro do parafuso: 120 mm • Rácio L/D: 24 • Controlo de espessura: Sim • Alimentação de material incluída Unidade de fecho • Curso inicial: 710 mm • Força de fixação: 800 KN • Dimensões da placa: o Comprimento: 1600 mm o Largura: 600 mm Máquina robusta reconhecida pela sua fiabilidade, adequada ...
Linha de varas composta por: Sistema de alimentação com funil agitado Extrusor de Werner & Pfleiderer Modelo ZSK Ø53x33D de parafuso duplo Interruptor manual de filtros, modelo CFM75 Cabeça de granulação de haste de 10 fios + 6 fios Aquário de imersão de 4 M TI400/4 Secador Periplast Granulador Exibição
KAUTEX KCC30 Máquina de Moldagem por Soprar por Extrusão Ano: 2012 Horário de funcionamento: 33.000 h 1 estação Força de aperto: 300 KN Diâmetro do parafuso: 90 mm Cabeça de acumulação de 4 kg (HDPE) Dimensões da placa: 530 x 700 mm Distância entre as placas 1000 mm Dimensões máximas do molde: 870 x 650 x 765 mm Sistema de controlo Comando de Blow Tipo de cabeça: Cabeça vertical com acumulador hidráulico Volume máximo do recipiente: 30 litros Diâmetros dos chips: 90, 150, 170, 190 ou 220 mm Pressão máxima: 220 bar Consumo de ar: 95 m3/h Ar de pressão: 6 - 10 bar Potência instalada: 20 KW Número de zonas de temperatura: 5
CDM PREALPINA REGRANULATING LINE 130 mm 2xdegassing, for PE PP PS PP PC ABS (it has been working with clean scraps only), extruder with 130 mm. screw Ø 40L/D, including buffer silo with agitators, horizontal extraction screw, crammed feeding unit synchronized to extruder screw, a.c. 283 kw drive, n.2 degassing pumps, semi-automatic screen changer 230 mm diam.screens , water ring pelletizing unit, stainless steel drying centrifuge, vibrating screen, electric cabinet, blower + pipings, vertical mixer, machine reconditioned, can be fitted with a [FIMIC RAS](.germanplast/listings/5241333-refurbished-fimic-ras-400-automatic -screenchager-reconditioned) fully automatic screenchanger, installed power - used power in work: about 60-65% : 435, capacity: 500-600 kg/h, availability: 5 weeks time, options available: fully automatic screenchanger, conditions: refurbished, type: double degassing fo ...
CDM PREALPINA RECYCLING EXTRUDER, Materials PE PP PC PS ABS PA, extruder with 130 mm. screw diam., Constructed in 2006, crammed feeding unit, extruder 130 mm., a.c. 283 kw drive, one degassing pump 5,5 kw, semi-automatic, non-stop hydraulic screen changer 230 mm diam.screens, hydraulic power station, water ring pelletizing unit, drying centrifuge, heat exchanging unit, vibrating screen, electric cabinet, machine reconditioned, installed power - used power in work: about 60-65% : 283, options available: different pelletizer, with or without buffer silo, with blower + bag filling station with vertical mixer, capacity: 500-600 kg/h depending on material and feeding rate, conditions: reconditioned (or as is)
FIMIC RAS+REF 400 FULLY AUTOMATIC SCREENCHANGER, screening area 1.206cm², for PP / LDPE / LLDPE / HDPE / PS / EPS / ABS / PVB, possible setting as : continuous scraping OR scraping on an Amp.threshold OR backflush, it was mounted on extruder producing 800 kg/h with 100-150 my screening, Always used as RAS (REF equipment brand new), 30 kw drive, totally checked in 2024 by constructor, Immediately available, remote connection (Industry 4.0) with pressure control system from pulpit, 4-5 spare laser filters available, multipolar plug connectors, We can supply spare screens for this machine., Laser screen from 80 to 300 µ - Mesh from 180 to 50, Punched screen from 400 to 2.000 µ - Mesh from 40 to 10, installed power - used power in work: about 60-65% : 30
MOLD BLOCKS for MAJOR CORRUGATORS, precision engineered in proven OEM quality, Range : 4,5 mm.ID to 500 mm OD, fast delivery, high precision, durable and reliable, accurate fit, maximum flexibility for bespoke parts
Here is a list of available equipment for pipes and profile extrusion from EU constructors., New equipment is constructed by renouned German Constructors, Used equipment is in good working conditions, Check the PDF list below and revert to us with your inquiries., Be very specific in yuoe questions and please don not forget to give your full contact, yourname, your Company name, Country, Whatsapp and phone no. Well be happy to assist you.
ROTATING SCREEN, construction in Aisi304 stainless steel, previously working on a 160 mm extrusion line, stainless steel screen with 17 mm holes, 2 exits for lumps and good materials, 0,25 kw motor, Bonfiglioli gearbox, loading hopper 305 x 505 mm., excellent conditions, installed power - used power in work: about 60-65% : 0,25 kw, availability: immediate, conditions: excellent
PREALPINA CDM EXTRUSION LINE 105 mm strand, loading hopper for hard plastics (possible addition of feeding screw on request), extruder with screw Ø 105 mm 35 L/D, n.1 vacuum degassing pump, d.c. motor 117 kw 400 V 3Ph.50 Hz, semi-automatic, non-stop, hydraulic screen changer, hydraulic pack, strand die, cooling bath, air drying tunnel, strand pelletizer, vibro classifier, The line is offered reconditioned, availability: 6 weeks from confirmation, options available: different cutting, different screen, upstream and downstream equipment, capacity: 400 kg/h, conditions: reconditioned with warranty, type: single screw
CRAMMED FEEDING UNIT, reconditioned, This unit can be synchronized to feeding screw from buffer silo and horizontal screw in extruder to grant a uniform, continuous feeding, for light scraps, mounted on a 130 mm extrusion line, totally reconditioned, possible addition of mastebatch feeder, availability: in stock, conditions: reconditioned, type: for up to 700 kg/h extruders
