Fabricante:
(Categoria: 302)
Key data: 120
Extrusor 1 eixo para o fabrico de pellets. 120 mm Ø, 35 L/D, marca: FBM (Falzoni), tipo: ETF 120 V 380/5L, ano: 1988. Motor: 200 KW. Degasifier e mudança de filtro. Cabeça cortada debaixo de água, ano: 2006, marca: PRT e silo de alimentação forçada.
Key data: 130
Extrusor 1 eixo: 130 mm Ø, 35 L/D, para plásticos grancear, marca: Plasco, com alimentação forçada. Desgaser, com bomba de vácuo: 15 cv. Alteração do filtro: 260 mm, corte de sobrecarga para a água. Ecrã e motor vibratórios: 238 KW com unidade de velocidade variável e painel elétrico. GT-2982
COMAC TWIN SCREW EXTRUDER EBC60, barrel with n. 2 x 60 mm. diam co-rotating screws, 42 L/D, spare : 2 screws and 1 barrel reconditioned to 100% performances, Mounted: screws + barrel in very good conditions, n.1 dosing unit with hopper, N.2 vacuum degassing points, d.c.132 kw Siemens main drive 400V 50 Hz, non-stop hydraulic screen-changer with 90 mm screens (available with fully automatic screenchanger, on separate request), hydraulic pack, fitted with strand die (available with water ring pelletizer on request) + stainless steel cooling bath with heat exchanging unit + air-blowing dryer, electric cabinet (for extruder, screen-changer, hydraulic pack), pelletizer for strands, TVV Cooling column for granule., constructed i n 2001, The line is offered totally or partially reconditioned (photos show the machine during reconditioning), installed power - used power in work: about 60-65% : 1 ...
FIMIC RAS 325 BACKFLUSH, fully automatic screenchanger, for back-flush only, so for contamination under 5%, no costs for doctor blades, no cost for laser filter., works with standard mesh, capacity related to screening mesh - with a 250 µ mesh, up to 700 kg/h, connected for test, offered totally reconditioned, with new control panel (or with drawings only), availability: 4 -5 weeks time, capacity: Max 500-600 kg/h, conditions: totally reconditioned, type: fully automatic - backflush
CDM PREALPINA 500-600 kg/h, Materials PE PP PC PS ABS PA, extruder with 130 mm. screw diam. 35L/D, a.c. 283 kw drive, Constructed in 2013, crammed feeding unit, extruder 130 mm., one degassing pump 5,5 kw, fully-automatic screen changer FIMIC RAS 400, water ring pelletizing unit, drying centrifuge, heat exchanging unit, vibrating screen, electric cabinet, machine offered reconditioned, installed power - used power in work: about 60-65% : 435, availability: Subject to unsold, conditions: Totally reconditioned, options available: Fimic or non stop screencganger + buffer silo or loading screw+hopper + crammed feeder with buffer silo synchronized with horizontal screw, used power in work: 280 kw, cooling: 13.400 Kcal/h, MATERIALS: PE PP PC PS ABS EPS XPS EPP, delivery time: 30 days ca
Key data: 72 mm, 28 , 50 U/min
Extrusora paralela de dois parafusos Cincinnati ARGOS 72R-28D Capacidade de produção: máximo 400 kg/h (dependendo do material e das condições de processamento) Transmissão principal: 47 kW (motor AC) Diâmetro do parafuso: 72 mm, L/D = 28 Velocidade do parafuso: máximo 50 rpm Geometria do parafuso para U - tubos de PVC ou perfis técnicos Parafusos e canos originais em muito bom estado 12 x Zonas de aquecimento de ferramentas 3-ph/5-pinos CEE 32A/10,5 kW 1 x zona de aquecimento adaptadora 1-ph/5-pinos CEE 32A/5,5 kW 13 x TC Tipo J 16 mm Tuchel C70B de 3 pinos 4 m Inclui sensor de massa, pressão e temperatura Interface sucessora: Interface 1 (analógica) e Can Open Bus 3 x Plasticolor Adicional 0–10V Controlo de máquina Cincinnati EXc ProXP Transportador horizontal com tolva de material Carga total ligada: 184 kW Dimensões (L x L x H): 4.018 x 1.250 x 2.463 mm ...
BLOWN FILM LAB EXTRUDER, suitable for testing granulate, for LDPE and HDPE, die diam.97 mm., 800 mm wide single winder, fixed pull off, fixed die head, Maximum throughput rate 35 kg/h, height of pul off 3.700 mm from ground, installed power - used power in work: about 60-65% : 7,5 kW, working width: 350 mm, conditions: checked
EREMA INTAREMA 1309 TVE plus SD, Complete regranulation line for LDPE LLDPE HDPE PP PS, Throughput rate 480-750 kg /h depending on materials, Including_, loading conveyor belt, tunnel metal detector, compacting unit, extruder with 90 mm.screw Ø, double piston, backflush screen-changer, double degassing unit,, water ring pelletizer, stainless steel centrifugal dryer, closed cycle water flow, electric cabinet for full management, 3 years of work (26.365) hours with commercial LDPE washed and dried yielding 500-600 kg/h, Users manuals, CE compliance declaration, Electrical drawings available, capacity: 480-750 kg/h depending on materials, conditions: very good conditions - now disconnected , type: compact line from scraps to granule
PLASTIMAC LAB EXTRUDER, for blown film, suitable for testing granulate, 25 mm screw diameter, 70 mm diam. die, 500 mm collection frame, 7,5 Hp drive, complete wuth supporting structure, (corona treatment+small printer can be sold separately if required), installed power - used power in work: about 60-65% : 7,5 Hp, working width: 500 mm, conditions: good
BLOWN FILM LAB EXTRUDER, suitable for testing granulate, 25 mm screw Ø 25 L/D, 60 mm diam. die, 500 mm. pull off, 350 mm collection frame, 7,5 kW drive, complete with tower, nips and rolls, control panel, production rate 10 kg/h, installed power - used power in work: about 60-65% : 7,5 kW, working width: 350 mm, conditions: checked
LAB FILM EXTRUDER BETOL 2525, for testing granules, single screw extruder, screw Ø 25 mm, blown film die head 60 mm., 3,0 kw d.c. motor and drive., 4 heating zones on barrel., 2 die head heating zones, cooling on screw and throat, calibration cage, nips and rolls, tower, 500 mm wide double collection frame, control panel, type: lab extruder
VENANZETTI COOLING TOWER, for extrusion lines, this system allows to cool the granule after extrusion with little space taken, READ CONSTRUCTORS DESCRIPTION :, Spiral elevators, The spiral elevator is the perfect solution for moving a product upwards while simultaneously treating it thermally in very small spaces., The conveyor surface is a rising helicoidal trough, or rather a spiral with a constant pitch. The width of the trough is determined by the difference between the helicoid’s external and internal diameter. The product moves upwards on the conveyor by means of an oscillating thrust movement with controlled frequency and amplitude, and the direction is inclined in order to throw the product upwards., The advantages of this solution are:, -, very small layout space;, - thermal treatments while the product is on the conveyor (heating, cooling, drying, curing, etc.);, - speed on t ...
ROTATING SCREEN, construction in Aisi304 stainless steel, previously working on a 160 mm extrusion line, stainless steel screen with 17 mm holes, 2 exits for lumps and good materials, 0,25 kw motor, Bonfiglioli gearbox, loading hopper 305 x 505 mm., excellent conditions, installed power - used power in work: about 60-65% : 0,25 kw, availability: immediate, conditions: excellent
CDM PREALPINA REGRANULATING LINE 130 mm 2xdegassing, for PE PP PS PP PC ABS (it has been working with clean scraps only), extruder with 130 mm. screw Ø 40L/D, including buffer silo with agitators, horizontal extraction screw, crammed feeding unit synchronized to extruder screw, a.c. 283 kw drive, n.2 degassing pumps, semi-automatic screen changer 230 mm diam.screens , water ring pelletizing unit, stainless steel drying centrifuge, vibrating screen, electric cabinet, blower + pipings, vertical mixer, machine reconditioned, can be fitted with a [FIMIC RAS](.germanplast/listings/5241333-refurbished-fimic-ras-400-automatic -screenchager-reconditioned) fully automatic screenchanger, installed power - used power in work: about 60-65% : 435, capacity: 500-600 kg/h, availability: 5 weeks time, options available: fully automatic screenchanger, conditions: refurbished, type: double degassing fo ...
GAMMA MECCANICA GM 125 COMPAC - TOTALLY RECONDITIONED, Extrusion line with pre-compactor, Nominal throughput rate 700-800 kg/h depending on the type of material and feeding rate, Average energy consumption : 0.25-0,30 kwh/kg, The line includes:, Loading belt, tunnel metal detector, compactor with dosing unit, extruder with 125 mm screw diameter, 35 L/D, nitrided screw and barrel in very good conditions. The line was working with LDPE film and PPL non woven, semi-automatic, non-stop hydraulic screenchanger, oleo-dynamic pack, water ring pelletizer, drying centrifuge, recycling water tank, electric cabinet for the complete management of the line, The line is offered reconditioned, See Constructors [description](.gamma-meccanica.it/en/plastic-recycling/plastic-recycli ng-compac/) for a new line like this one, availability: immediate, capacity: 600-950 kg/h with only 0,25-0,30 kwh/kg used, c ...
TECNOVA RECYCLING EXTRUDER, mod.Mini 60 mm., for PE PP scraps, throughput rate around 127 kg/h, buffer silo, forced feeding unit, extruder with 60 mm screrw diam., 35,3 kw drive, semi-automatin changer, water ring pelletizer, drying centrifuge, electric cabinet for whole management., installed power - used power in work: about 60-65% : 35,3 kw, capacity: 127 kg/h depending on materials, conditions: used, in good conditions
Key data: 75 mm, 30
Extrusora de Parafuso Simples Cincinnati TALOS 75-30G Capacidade de saída: máximo 450 kg/h (dependendo do material e das condições de processamento) Diâmetro do parafuso: 75 mm, L/D = 30 Geometria do parafuso para processar HDPE/PP 11 x Zonas de Ferramenta, incluindo a Sonda Térmica TC Tipo J ITIB de 3 pinos incluindo sensor de massa, temperatura e pressão Interface para sucessão via CAN Open Bus Controlo por máquina Cincinnati EXcXP-touch Motor principal de potência de acionamento: 125 kW Carga total ligada: 178 kW Peso da máquina: 2.200 kg Observação: incluindo motor suplente (usado) sem tolva de material Condição: usado, testado de função
FULLY-AUTOMATIC can be used in SEMI- AUTOMATIC mode with small different batches on and off when needed No operator (you save 1 man per shift) Low maintenance costs (no discs, just knives which can be re-sharpened) No need to reduce size, on most scraps. Suitable for film + foam + fibers, moisture and some contamination are well tolerated. Best degassing in the process, compared with other systems. Remote assistance through modem Agglomerator with barrel diam. 1500 mm.,LxWxH 4,3 x 2,3 x 5,050 mt. 570 kw , installed power abput 370 kw in work Steel cylinder case with inspection door, Side opening panel for inspection and replacing blades Power switchboard, Exchangeable inner steel liner for barrel Oleo-dynamic power station 0,75 kw with electro-valve opening, Hub temperature control system, Grease lubricated drive bearings, 0,4 kw ventilator for belt cooling with air conveyor, Steam vacuu ...
This LEISTRITZ ZSE60MAXX-48D was manufactured in 2012. A co-rotating twin-screw extruder, its designed for high-performance compounding of advanced polymer materials, including biodegradable polymers. Adaptable to various extrusion processes, its ideal for bioplastics, masterbatch production, or specialty compounding. Contact us for more information about this machine.
FIMIC RAS 325 SCRAPER, fully automatic screenchanger, screening surface 77.900 mm², Throughput: up to 600 kg/h depending on material and contamination, with scraping system, suitable for extrusion lines with capacity up to ca 500 kg/h or more depending on screening, Just disconnected, excellent conditions, constructed in 2023, immediately available, We can supply spare screens for this machine at competitive prices., Laser screen from 80 to 300 µ - Mesh from 180 to 50, Punched screen from 400 to 2.000 µ - Mesh from 40 to 10, capacity: 600 kg/h depending on material and mesh, availability: immediate, type: fully automatic
Gamma Meccanica 105 mm 40 L/D, for LDPE HDPE PP ABS PC PS, Nominal throughput rate 300-400 kg/h depending on feeding rate and material, Average energy consumption : 0,23-0,28 kWh/kg including buffer-silo feeding auger crammed feeder extruder with 105 mm screw 40 LD, vacuum degassing pump 110 kw a.c.drive with inverter non-stop hydraulic screenchanger (can be fitted with a [fully automatic screenchanger](.germanplast/listings/7610249-used-fimic-ras-325-automa tic-screenchanger)) water ring pelletizer drying centrifuge electrical cabinet user’s manuals and drawings constructed in 2000 offered RECONDITIONED, Total length 11.000 mt., Possible addition of upstream and downstream equipment., options available: fully automatic used screenchanger, capacity: 300-400 kg/h with only 0,23-0,28 kWh per kg produced, conditions: reconditioned, type: buffer silo+crammed feeder, Location: IT- 11020 Iss ...
BANDERA TWIN SCREW PVC PIPES EXTRUDER, for pipes with min/max diam.40/200 mm., extruder with n.2 parallel counter-rotating screws Ø 90 mm, Throghput rate 400 kg/hr, missing of screenchamger (can be added separately), n.2 dies available 40 to 125 mm + 125 to 200 mm., Tooling from 40-200 mm (available diam. 100 mm for O-Ring), Bandera 6 mt.long vacuum calibration tank, IPM haul off unit, IPM saw, IPM belling unit, constructed in 1998, totally refurbished in 2006 by Plasco, machine now disconnected, offered RECONDITIONED., availability: immediate, working width: 40-200 mm Ø, capacity: 400 kg/h, conditions: disconnected, type: pipes extrusion line
CDM PREALPINA RECYCLING EXTRUDER, Materials PE PP PC PS ABS PA, extruder with 130 mm. screw diam., Constructed in 2006, crammed feeding unit, extruder 130 mm., a.c. 283 kw drive, total installed power 406 kw, one degassing pump 5,5 kw, semi-automatic, non-stop hydraulic screen changer 230 mm diam.screens, hydraulic power station, water ring pelletizing unit, drying centrifuge, heat exchanging unit, vibrating screen, electric cabinet, machine reconditioned, installed power - used power in work: about 60-65% : 283, options available: different pelletizer, with or without buffer silo, with blower + bag filling station with vertical mixer, capacity: 500-600 kg/h depending on material and feeding rate, conditions: reconditioned (or as is)
NGR S-GRAN 65 VHD, Constructed in 2011, offered checked for good conditions, including:, loading conveyor belt, tunnel metal detector, densifier, extruder with 65 mm Ø screw, degassing point, hydraulic screenchanger, water ring pelletizer, drying centrifuge, extraction vent with cyclon and bag supporting structure., conditions: used, checked, type: compact recycling line
ICMA SAN GIORGIO TWIN SCREW EXTRUDER CO-ROTATING, used for elastomers TPE TPU SBS,.., Extruder with co-rotating segmented screws 2 x 140 mm 36 L/D, Screws speed 178 rpm, Reinforced gearbox, Siemens 430 kW drive, degassing pump, semi-automatic hydraulic screenchanger, hydraulic pack, Dry pelletizing unit, Electric panel overhauled in 2015, added touch control, Constructed in 1997, CE compliance declaration, electric drawings.
UNION SHEET EXTRUSION LINE, for PS for thermoforming sheets up to 1.500 mm wide, Main TR130 extruder with 130 mm screw Ø, 200 kW drive, Elerctrically heated fan cooled barrel., second TR60 extruder with 60 mm screw Ø, 50 Kw drive, 1.500 mm. flat die with flex lip die, 1.500 mm wide 3 roll inclined polishing stack with a.c. drive + inverter individual roll drives., 3 zone thermoregulator, pump group, haul off unit, availability: immediate, working width: 1.500 mm, conditions: good overall conditions, type: flat die
ICMA SAN GIORGIO TWIN SCREW EXTRUSION LINE, used for PE PP, Forced feeding hopper with frame, Extruder with segmented screws 2x140 mm. 32 LD, 200 Kw drive, n.1 vacuum degassing pump, hydraulic screenchanger, Water ring pelletizer (year 2016), drying centrifuge in stainless steel, Constructed in 1990, Offered AS IS WHERE IS, conditions: used
GAMMA MECCANICA AF EXTRUSION LINE (photos and video taken before reconditioning - video includes shredder+granulator available separately), for LDPE LLDPE HDPE PP PS PC ABS, Nominal production rate : 900-1100 kg/h (this varies on material and feeding rate), Average energy consumption : 0,23-0,28 kwh/kg, inlcuding :, Buffer silo, screw conveyor, crammed feeding system, extruder with 160 mmm. screw 36 LD, double degassing system, hydraulic non-stop screenchanger 160/300MF, water ring pelletizer type TFD1000, centrifugal dryer, always ran with clean production scraps, very good running conditions - connected, The line is offered AS IS, See [Constructors page](.gamma-meccanica.it/en/plastic-recycling/plastic-recycling-af/) for more info, options available: reconditioning, capacity: 1.000 kg/h, type: for LDPE HDPE LLDPE PP PS PC ABS
LEISTRITZ 2x67 mm TWIN SCREW COMPOUNDING LINE, Starve feed hopper extruder with 2 x 67 mm Ø segmented, co-rotating screws 34 L/D max screw speed 300 rpm 6 heating areas on barrel vacuum degassing pump d.c. motor 75 kw with forced vent fan control panel size 0,4×1.15 x 2 mt. Dimensions :LxWxH 4,7 x 0,72 x 1,835 mt. weight about 3.000 kgs construction year 1993 machine offered reconditioned, availability: 7 weeks from confirmation, options available: cooling bath, strand pelletizer, conditions: reconditioned
