Producent:
(Kategoria: 106)
Pressure:150 tstroke:fix 80 mmno. of strokes:30 - 150 /mindistance between columns:930 mmdistance table/ram, max. stroke up, adjustment up:400 mmtable surface area:880x1300/1500x600 mmhole in the table:760 x 180 mmtable height over floor:1270 mmcolumn travel -side:650 mmram surface:920x1000/1300x600 mmweight:27,5 tDimensions (WxDxH):3,1 x 1,8 x 4,3 mWITHOUT feeder:can be offered optionally
: neu : ca. 4 Monate ab Auftragse : Italien : 92000 €: 1738.8 €: 200 to: 500 mm: 2.500 x 2.050 mm: 800 mm: 20 mm/s: 2 mm/s: 2950 mm: 2500 mm: 2600 mm: 6500 kg: horizontal verschiebbar : 2050 mm: 1450 mm: 1600 mmhorizontal movable cylinderhydraulicaly movable standcontrol by levers as well as control panelaccording to CE regulations user manual in GERMAN and ENGLISHOPTIONS:Work table, welded to the base frame, with holes on the surfaceControl panel on the swivel arm (push buttons for press movement, solenoid valves, Siemens CPU)Radio control panel (push buttons for press movement, solenoid valves, Siemens CPU)Siemens control with touchscreenLifting cylinders in the table (6, 8 or 10 pcs.)No-rotation shaft for the piston2 speeds for stand movement and cylinderOil cooler and decompression valveThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure:100 tdistance between columns:770 mmstroke:400 mmdistance table/ram, stroke up:800 mmTable area:770 x 900 mmtable height above floor:850 mmdie cushion pressure in table:40 tdie cushion stroke in table:200 mmdie cushion area in table:600 x 600 mmside window:600 mmram surface:770 x 900 mmspeed down:62 mm/sspeed up:350 mm/sworking speed:17,5 mm/soil volume:700 lpower requirement:42,0 kWweight:9,0 tDimensions (WxDxH):2,6x 2,0 x 3,8 mGerman Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 drawing cushion in table:hydraulic
pressure:315 tdistance between columns:1800 mmstroke:400 mmDistance table/ram, max. stroke up, adjustment up:650 mmtable surface area:1800 x 1000 mmtable height over floor:900 mmdie cushion pressure in table:80 tdie cushion stroke in table:100 mmDie cushion area in table:1300 x 600 mmside window:600 mmram surface:1800 x 1000 mmspeed down:400 mm/sspeed up:300 mm/sworking speed:15 - 80 mm/soil volume:1700 lpower requirement:55,0 kWweight:27,5 tdimensions (WxDxH):3,1 x 2,2 x 4,6 mGerman Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 die cushion in table:hydraulic foundation pit:not necessary
pressure:320 tdistance between columns:1530/1370 mmstroke:320 mmdistance table/ram, stroke up:830 mmtable surface area:1500 x 650 mmdie cushion pressure in table:12,5 ttable height over floor:1100 mmside window:570 mmram surface:1240 x 650 mmcapacity of ejector in table:12,5 tspeed down:450 mm/sspeed up:440 mm/sworking speed:63,6 mm/soil volume:2100 lpower requirement:2 x 45,0 kWweight:27,0 tdimensions (WxDxH):4,0 x 2,3 x 4,9 mGerman Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 drawing cushion in table:hydraulic drawing cushion in ram:hydraulic ram interlocking:hydraulic Option: NEW electrical controls:Siemens S7-1500 F
pressure:160 tdistance between columns:1580/1360 mmstroke:320 mmdistance table/ram, max. stroke up, adjustment up:830 mmtable surface area:1460 x 850 mmtable height over floor:1100 mmside window:870 mmram surface:1400 x 850 mmspeed down:540 mm/sspeed up:520 mm/sworking speed:26 - 85 mm/soil volume:2100 lpower requirement:45,0 kWweight:22,6 tdimensions (WxDxH):4,0 x 2,3 x 4,9 mGerman Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 ram interlocking:hydraulisch
pressure:160 tdistance between columns:1600/1420 mmstroke:345 mmdistance table/ram, max. stroke up, adjustment up:830 mmtable surface area:1460 x 850 mmtable height over floor:1100 mmside window:770 mmram surface:1410 x 850 mmspeed down:540 mm/sspeed up:520 mm/sworking speed:26 - 85 mm/soil volume:2100 lpower requirement:45,0 kWweight:23,0 tdimensions (WxDxH):4,0 x 2,3 x 4,9 mGerman Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 ram interlocking:hydraulisch
pressure:025 tthroat:200 mmstroke:8 - 80 mmno. of strokes:60 - 180 /mindistance table/ram, max. stroke up, adjustment up:330 mmtable surface area:560 x 400 mmhole in the table:150 mmtable height over floor:800 mmpassage to the back:240 mmram surface:355 x 220 mmram adjustment:50 mmweight:3,0 tdimensions (WxDxH):1,0 x 1,4 x 2,2 minfinitely variable drive:Stöber overload protection in ram:mechanical NEW electrical controls:Pilz
pressure:300 tdistance between columns:1800 mmstroke:1000 mmDistance table/ram, max. stroke up, adjustment up:1300 mmTable surface area:1600 x 1200 mmTable height above floor:1080 mmRam surface:1600 x 1200 mmWeight:24,0 tDimensions (WxDxH):2,8 x 2,1 x 6,0 mGerman Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2
Model prasy ekscentrycznej Šmeral LKR 200/80. Wyprodukowany w 1962 roku. Nominalna wydajność tłoczenia: 200 ton. Skok taranu: 50 mm. Prędkość robocza: 60 uderzeń na minutę.Regulacja ulewu: 80 mm. Maksymalna odległość między stołem a suwakiem: 500 mm. Stół roboczy: 800 x 1500 mm. Otwór w stole: 700 x 160 mm. Moc zainstalowana: 20 kW.Przybliżona masa: 11 800 kg. Zamknięta maszyna mechaniczna, odpowiednia do tłoczenia, cięcia i obróbki blachy. Auction-ID: A7-47333-18
pressure:100 tthroat:360 mmstroke:500 mmdistance table/ram, max. stroke up, adjustment up:800 mmtable surface area:900 x 560 mmtable height over floor:710 mmram surface:630 x 400 mmspeed down:200 mm/sspeed up:200 mm/spower requirement:17,0 kWweight:5,0 tDimensions (WxDxH):1,2 x 1,9 x 3,3 mGerman Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2
pressure:400 tdistance between columns:1100 mmstroke:250 mmno. of strokes:25 - 75 /mindistance table/ram, max. stroke up, adjustment up:900 mmtable surface area:1100 x 965 mmcapacity of ejector in table:30 tejector stroke of ejector in table:80 mmcapacity of ejector in ram:3 tstroke of ejector in ram:60 / 70 mmram surface:980 x 800 mmcolumn travel -side:800 mmram adjustment:20 mmpower capacity:80,0 + 5,5 kWweight:47,0 tDimensions (WxDxH):3,5 x 3,3 x 6,0 mweight of switch cabinet:1,4 tdimensions of electrical cabinet (WxDxH):4,9 x 0,5 x 2,6 mejector in ram:hydraulic
Pressure:040 tthroat:180 mmstroke:0 - 76 mmno. of strokes:145 /mindistance table/ram, max. stroke up, adjustment up:350 mmtable surface area:600 x 360 mmhole in the table:110 mmtable height over floor:800 mmram surface:270 x 175 mmram adjustment:65 mmpower capacity:2,2 kWweight:1,75 tDimensions (WxDxH):1,1 x 1,2 x 2,1 mGerman Safety: permitted for manual loading:CE-sign clutch:pneumatic
pressure:100 tdistance between columns:1250 mmstroke:1035 mmtable surface area:890 x 1280 mmdistance table/ram, max. stroke up, adjustment up:1035 mmtable height over floor:630 mmram surface:1000 x 1200 mmside window:700 mmmax. tool weight:7 tmax. capacity of swivelling ram plate:3,5 toil volume:180 lpower capacity:9,0 kWweight:11,0 tDimensions (WxDxH):2,1 x 3,8 x 3,9 mram interlocking:hydraulic
: neu : ca. 10 Wochen ab Auftrags : Türkei : 80100 €: 1513.89 €: 60 to: 350 mm: 550?850 mm: 600?1000 mm: 600 mm: 100 mm/s: 10 mm/s: 165 mm/s: 11 kW: 1950 mm: 1900 mm: 2850 mm: 5350 kg: 170 bar: 24 to: 150 mm: 100 mm: 156 bar: 65 mm/sec.: 470?650 mmlight curtaincushionmanual and automatic workingmanual stroke adjustment by camshaft switchmaintenance free self lubricating 4-fold ram guidingpolster plate with T-slotsaccording to ",CE", rulesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure:2 tdayligth:80 mmCenter of spindle to wall or column:100 mmweight of the machine ca.:0,5 tdimensions of the machine ca.:0,8 x 0,6 x 2,0 mHand operated fly press, with center turning device appr. 100 x 400 mm length- Handwheel diameter 600 mm
pressure:620 tdistance between columns:2250 mmstroke:1250 mmDistance table/ram, max. stroke up, adjustment up:1600 mmtable surface area:2200 x 1280 mmram surface:2200 x 1500 mmtable height over floor:800 / 1000 mmcolumn travel -side:750 mmfeed down:10 - 250 mm/secfeed up:10 - 500 mm/secworking feed:1 - 24 mm/secoil volume:2000 lpower capacity:45,0 + kWweight:42,0 tDimensions (WxDxH):3,7 x 2,6 x 6,8 mGerman Safety: permitted for manual loading:CE-sign foundation pit:not necessary
pressure:080 tthroat:280 mmstroke:8 - 112 mmno. of strokes:30 - 120 /mindistance table/ram, max. stroke up, adjustment up:500 mmtable surface area:840 x 580 mmhole in the table:150 mmtable height over floor:910 mmpassage to the back:640 mmram surface:560 x 300 mmram adjustment:80 mmpower requirement:7,5 kWweight:8,0 tdimensions (WxDxH):1,6 x 2,3 x 3,3 mGerman Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 overload protection in ram:hydraulisch ram adjustment:motoric
pressure:025 tthroat:200 mmstroke:8 - 80 mmno. of strokes:180 /mindistance table/ram, max. stroke up, adjustment up:330 mmtable surface area:550 x 400 mmhole in the table:60 mmtable height over floor:800 mmpassage to the back:200 mmram surface:355 x 220 mmram adjustment:50 mmpower requirement:2,7 kWweight:2,5 tdimensions (WxDxH):1,2 x 1,8 x 2,4 moverload protection in ram:mechanical
Pressure:035 tthroat:225 mmstroke:8 - 100 mmno. of strokes:130 /mindistance table/ram, max. stroke up, adjustment up:370 mmtable surface area:580 x 450 mmhole in the table:210 x 170 mmtable height over floor:700 mmram surface:350 x 180 mmram adjustment:70 mmpower requirement:2,2 kWweight:2,2 tdimensions (WxDxH):1,0 x 1,8 x 2,2 mGerman Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 clutch:hydraulic overload protection in ram:mechanical
: neu : ca. 4 Monate ab Auftragse : Italien : 120000 €: 2268 €: 300 to: 500 mm: 1000x500 mm: 1200x800 mm: 600 mm: 400 mm: 22 mm/s: 2 mm/s: 7.5 kW: 2300 mm: 1500 mm: 3100 mm: 11200 kg4-fold round guidancetable and ram with T-slots2 hand operationSiemens PLCmanometerusers manual Light barrier € on Request Siemens control for programming of stroke and press time € on RequestSiemens touchscreen-control, 50 programsstoreable, for programming:• Upstroke and downstroke quota• Break time in the bottom• time of Decompression• setting pressure of work• Pieces counter• prestop in upstroke and downstroke• setting for movement in manual and in automatic• management of alarms and anomalies € on Request Working hour counter € on Request Stroke counter € on Request Deompression valve € on Request Oil cooler with decompreission valve € on Request Pressure switch € on R ...
pressure:120 tdistance between columns:430 mmstroke:125 mmdistance table/ram, stroke up:400 mmtable surface area:430 x 450 mmtable height over floor:860 mmside window:230 mmram surface:250 mmworking speed:10 mm/spower requirement:11,0 kWweight:2,5 tdimensions (WxDxH):1,6 x 1,3 x 2,4 mGerman Safety: permitted for manual loading:CE-sign
Pressure:250 tstroke:30 mmno. of strokes:60 - 500 /minDistance between columns:1500 mmdistance table/ram, max. stroke up, adjustment up:390 mmtable surface area:1580 x 1100 mmhole in the table:1270 x 300 mmtable height over floor:1470 mmside window:600 mmram surface:1500 x 900 mmram adjustment:100 mmmaterial width:500 mmmaterial thickness:0,5 - 1,5 mmcoil weight:6,5 tcoil internal diameter:420 - 560 mmcoil external diameter:1500 mmpower capacity:45,0 kWWeight:44,0 tDimensions (WxDxH):3,3 x 1,8 x 4,5 mclutch:pneumatisch ram adjustment:motorisch double decoiler:LH 2-1,5-500 straightening machine:R 500 roll feed:mechanisch; Schuler, WK 8-500
impact energy:207951 mkgram hammer stroke:660 mmno. of strokes:100 /minimpact energy:2040 kJdistance lower die block / ram gudeway:660 mmThroat:750 mmsteel forging - rectangular up to:240 mmsteel forging - diameter up to:270 mmpower requirement:75,0 kWweight of hammer:16,5 tweight of anvil:15,5 tram hammer weight:750 kgweight:32,0 tdimensions (WxDxH):3,2 x 1,45 x 3,45 mMode of operation:pneumatisch
pressure:500 tdistance between columns:1910 mmstroke:500 mmDistance table/ram, max. stroke up, adjustment up:700 mmtable surfache without cutting impact cushions:1910 x 1360 mmtable surfache with cutting impact cushions:1600 x 1360 mmtable height over floor:800 mmram surface:1600 x 1270 mmSide window:600 mmspeed down:400 mm/sspeed up:330 mm/sworking speed:10 - 28 mm/soil volume:1200 lpower requirement:60,0 kWweight:40,0 tDimensions (WxDxH):3,6 x 2,5 x 5,0 mheight over floor:4,5 mGerman Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 cutting impact cushioning:hydraulic ram interlocking:hydraulic
: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 187100 €: 3536.19 €: 400 to: 4050 mm: Y1 / Y2 / X und R Achse : 365 mm: 3400 mm: 410 mm: 630 mm: hydraulisch : 160 mm/s: 10 mm/s: 160 mm/s: 650 mm: 500 mm/s: 250 mm: 900 mm: 154 mm: 2 x 11 kW: 5750 mm: 2110 mm: 3450 mm: 27780 kg1 SERVO MOTOR AND PUMP PER CYLINDER4 axes (Y1, Y2,X andR)CNC control SKY 22- intuitive touch-screen control (simple drawing of the bending outline with your finger) 21,5 in full HD- with 2D and 3D working screen- direct programming of the bending angle- user friendly programming in dialogue form optionally in 2D or 3D mode- 2D and 3D simulation of the bending sequence- automatic tool selection in 3D mode- automatic calculation of the blank sheet size- bending order calculation- graphic product and tool memory- correction possibility- USB and Ethernet interfaces for import, backup and programm transportation- OS: Wi ...
pressure:200 tdistance between columns:1400 mmstroke:300 mmdistance table/ram, max. stroke up, adjustment up:500 mmtable surface area:1300 x 1100 mmpressure of drawing cushion in table:80 tstroke of drawing cushion in table:150 mmdie cushion area:700 x 700 mmcapacity of ejector in ram:10 tejector stroke in ram:50 mmtable height over floor:930 mmside window:770 mmram surface:1300 x 1100 mmspeed down:400 mm/sspeed up:410 mm/sworking speed:20 - 50 mm/sreturn capacity:30 toil volume:1350 lpower requirement:70,0 kWweight:23,0 tdimensions (WxDxH):4,5 x 3,0 x 3,5 mGerman Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 drawing cushion in table:hydraulic ejector in ram:hydraulic foundation pit:not necessary
: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 252800 €: 600 to: 4050 mm: Y1 / Y2 / X und R Achse : 365 mm: 3100 mm: 410 mm: 700 mm: hydraulisch : 160 mm/s: 10 mm/s: 160 mm/s: 650 mm: 500 mm/s: 250 mm: 900 mm: 154 mm: 280 l: 5750 mm: 2500 mm: 4000 mm: 40500 kg1 SERVO MOTOR AND PUMP PER CYLINDER4 axes (Y1, Y2,X andR)CNC control SKY 22- intuitive touch-screen control (simple drawing of the bending outline with your finger) 21,5 in full HD- with 2D and 3D working screen- direct programming of the bending angle- user friendly programming in dialogue form optionally in 2D or 3D mode- 2D and 3D simulation of the bending sequence- automatic tool selection in 3D mode- automatic calculation of the blank sheet size- bending order calculation- graphic product and tool memory- correction possibility- USB and Ethernet interfaces for import, backup and programm transportation- OS: Windows- IGES, STEP ...
Pressure:1000 tdistance between columns:4100 mmstroke:1200 mmDistance table/ram, stroke up:2100 mmTable surface area:4000 x 2200 mmpressure of drawing cushion in table:360 tDie cushion stroke in table:300 mmDie cushion area in table:3500 x 1600 mmDie cushion pressure in ram:100 tDie cushion stroke in ram:160 mmDie cushion area in ram:3250 x 1600 mmRam surface:4000 x 2200 mmSide window:1300 mmOil volume:8000 lPower capacity:300,0 kWDimensions (WxDxH):5,75 x 4,3 x 9,55 mHeight above floor:7,7 mdie cushion in table:hydraulic, controllable die cushion in ram:hydraulic, controllable cutting impact cushioning:hydraulic
: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 202100 €: 3869.08 €: 320 to: 6050 mm: Y1 / Y2 / X und R Achse : 365 mm: 5100 mm: 450 mm: 630 mm: hydraulisch : 160 mm/s: 10 mm/s: 160 mm/s: 650 mm: 500 mm/s: 250 mm: 1100 mm: 154 mm: 160 l: 7500 mm: 1910 mm: 3350 mm: 29000 kg1 SERVO MOTOR AND PUMP PER CYLINDER4 axes (Y1, Y2,X andR)CNC control SKY 22- intuitive touch-screen control (simple drawing of the bending outline with your finger) 21,5 in full HD- with 2D and 3D working screen- direct programming of the bending angle- user friendly programming in dialogue form optionally in 2D or 3D mode- 2D and 3D simulation of the bending sequence- automatic tool selection in 3D mode- automatic calculation of the blank sheet size- bending order calculation- graphic product and tool memory- correction possibility- USB and Ethernet interfaces for import, backup and programm transportation- OS: Windo ...
400 € 
