podkategorii
(poziom trzeciej kategorii)
Producent:
(Kategoria: 110)
length:1000 mmwidth:800 mmweight of the machine ca.:0,7 tdimensions of the machine ca.:1,0 x 0,8 x 1,4 mHardstone measuring plate complete with FISCHER tailstocks and 4 leveling elements.
length in total:1200 mmband width:500 mmconveying height:1200 weight of the machine ca.:1 tdimensions of the machine ca.:4,0 x 1,5 x 2,2 mswarf conveyor with coolant attachmentTexte, Bilder, Grafiken, Layout, Strukturen und Algorithmen etc. unterliegen weltweitem Urheberrecht.Unerlaubte Verwendung der Daten, werden sowohl strafrechtlich als auch zivilrechtlich verfolgt.Das ausschließliche Urheber- / Nutzungsrecht dieser Daten wurde nachfolgender Person eingeräumt.Copyright © 2005-2024, Josef Weber. All rights reserved.
liter capacity:21 l/minPressure of coolant:50 barrated current:20 AClean water tank capacity:300 ltotal power requirement:16 kWweight of the machine ca.:200 Kgdimensions of the machine ca.:1,2 x 0,8 x 1,4 mWe are importers for FRASCARA high pressure coolant systemsFrascara delivers compact, mobile and reliable high pressure coolant / filtering systems with 50 or 70 bar 21 l/min.We can provide up to 3 pressure levels controlled by M-Functions.Oil operated systems are available also.Areas of application:Cleaning of coolant lubricants, emulsions and cutting oils without filter residues. Installation on machine tools for individual machinesFunction:The lifting pump inside the machine tank with minimum 2bar / 20 l/min capacity presses the contaminated water through the twin filter unit into the clean water tank. of the Frascara unit, from where it is pumped back through the spindle by a 50 ba ...
diameter:500 mmtool adaptor:50 Weight:12 kgface movement each head:82 mmfeeds:0,06 mm/U
We are selling a new unused but defective tool magazine with tool changer for a Makino PS 95.The magazine body was broken in two parts with a crane hook during unloading of the machine from its transport box.Also some tool pots are damaged.Can be repaired or used as spare parts
feed pressure:13 bartotal power requirement:3 kWweight of the machine ca.:0,15 tdimensions of the machine ca.:1,0 x 0,8 x 1,2 mHigh pressure air cooling device
Tool holder type:Weldon 16 mm Tool holder shaft type:DIN 69880 E2-40 x 16 Shank diameter:40 mmlength:75 mm90° angle rotary tool holder BMT 40There are two units available. Both are like new and never used.External coolant up to 80 bar.
size of pallet:400x400 mmnumbers of pallets:15 table load:400 kgweight of the machine ca.:0,060 tdimensions of the machine ca.:0,4 x 0,4 m15 pallets for Makino A 55, size 400 x 400 with T-slots for sale
floor-plate length:6000 mmfloor-plate width:2000 mmfloor-plate height:460 mmweight of the machine ca.:12,5 tdimensions of the machine ca.:6 x 2 x 0,46 m
floor-plate length:6000 mmfloor-plate width:2000 mmfloor-plate height:460 mmweight of the machine ca.:12,5 tdimensions of the machine ca.:6 x 2 x 0,46 m
length:500 mmwidth:320 mmheight:800 mmweight of the machine ca.:0,25 tAngular clamping device made by cast ironwith 5 T-slotss 22 mm
weight:400 kg8 clamping jaws each ca. 600 x 210 x 170 mm , hole dia. 22 mm, center distance ca. 170 mmwas used for clamping rings on a Vertical Turning Machine
Article: profile turning trip dogManufacturer: SchütteMany different sizes for Schütte profile turning attachment 68AEPlease, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
pickoff with shaft for Schutte multi spindle automatic lathe SF67, usedpickoff C26GFpickoff shaft C26GF9S1gear WG-67SPlease, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
Article: feed fingerManufacturer: DifferentConventional feed finger and collets of RS-systemFor multi spindle automatic lathes, used and newPlease, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
Article: pick-off colletsManufacturer: DifferentFor multi spindle automatic lathes, used and newPlease, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
Article: draw barManufacturer: SchütteFor multi spindle automatic lathes of different sizesPlease, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
Article: quadrant leverManufacturer: SchütteFor multi spindle automatic lathes of different sizesPlease, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
Article: feed leverManufacturer: SchütteFor multi spindle automatic lathes of different sizesPlease, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
Article: push rodManufacturer: SchütteFor multi spindle automatic lathes of different sizesPlease, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
Article: push leverManufacturer: SchütteFor multi spindle automatic lathes of different sizesPlease, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
10 € 
